Search

Recently, the widespread use of nanocatalytic materials has contributed to an enormous improvement in the performance of energetic materials, especially, highly dispersed nanomaterials. However, the lack of quantitative methods for analyzing the dispersion of nanomaterials limits their further widespread use. Although various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), etc. are used to analyze the relative dispersion of nanomaterials, it is not possible to quantitatively analyze their dispersion. Therefore, there has been an effort to develop new methods for the quantitative analysis of nanocatalytic materials. Fortunately, we were able to analyze the dispersion of nanocatalytic materials using the difference in their UV absorbance. More importantly, we established the corresponding difference equation to quantify the dispersion of nanocatalytic materials, which is capable of quantifying the dispersion of nano-Fe2O3 in nano-Fe2O3–ultrafine AP composites. The accuracy of the difference equation was verified using a variety of techniques and the desired results were obtained. Based on the above conclusions, the quantitative analysis method for the dispersion of nanomaterials that we established is expected to be widely used and promote the development of energetic materials. [ABSTRACT FROM AUTHOR]

Recently, the widespread use of nanocatalytic materials has contributed to an enormous improvement in the performance of energetic materials, especially, highly dispersed nanomaterials. However, the lack of quantitative methods for analyzing the dispersion of nanomaterials limits their further widespread use. Although various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), etc . are used to analyze the relative dispersion of nanomaterials, it is not possible to quantitatively analyze their dispersion. Therefore, there has been an effort to develop new methods for the quantitative analysis of nanocatalytic materials. Fortunately, we were able to analyze the dispersion of nanocatalytic materials using the difference in their UV absorbance. More importantly, we established the corresponding difference equation to quantify the dispersion of nanocatalytic materials, which is capable of quantifying the dispersion of nano-Fe 2 O 3 in nano-Fe 2 O 3 -ultrafine AP composites. The accuracy of the difference equation was verified using a variety of techniques and the desired results were obtained. Based on the above conclusions, the quantitative analysis method for the dispersion of nanomaterials that we established is expected to be widely used and promote the development of energetic materials.

Herein, we fabricated a ternary photocatalyst composed of CaFe 2 O 4 , multiwalled carbon nanotubes (CNTs) and graphitic carbon nitride (g-C 3 N 4 ) via a simple hydrothermal route. CaFe 2 O 4 acted as a photosensitizer medium and the CNT acted as a co-catalyst, which remarkably enhanced the photocatalytic performances of g-C 3 N 4 towards the degradation of hexavalent chromium (Cr(vi)) and the antibiotic tetracycline (TC) under visible light irradiation. To investigate the morphological and topological features of the photocatalyst, field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) analyses were performed. The surface properties and oxidation state of the CaFe 2 O 4 /g-C 3 N 4 /CNT composite were determined by X-ray photoelectron spectroscopy (XPS). The recombination rate of the charge carriers and the band gap values of the as-synthesized catalysts were analyzed by photoluminescence spectroscopy (PL) and diffused reflectance spectroscopy (UV/Vis DRS) studies, respectively. Besides the degradation reactions, the high hydrogen production rate of 1050 μmol h -1 under visible light using the CaFe 2 O 4 /g-C 3 N 4 /CNT composite loaded with 5 wt% CNT was observed. The superior photocatalytic performances of the CaFe 2 O 4 /g-C 3 N 4 /CNT composite can be ascribed to the effective heterojunction formed between g-C 3 N 4 and the CaFe 2 O 4 matrix, in which the CNT act as a conducting bridge in the system, promoting the production of photoinduced charge carriers in the semiconductor system. Finally, the plausible photocatalytic mechanism towards the degradation of pollutants and hydrogen production was discussed carefully., Competing Interests: There are no conflicts of interest in this paper., (This journal is © The Royal Society of Chemistry.)