Search

Boron nitride nanotubes (BNNTs) are ceramic compounds which are hardly oxidized below 1000 °C due to their superior thermal stability. Also, they are electrically almost insulators with a large band gap of 5 eV. Thus, it is a challenging task to etch BNNTs at low temperature and to convert their electrical properties to a conductive behavior. In this study, we demonstrate that BNNTs can be easily etched at low temperature by catalytic oxidation, resulting in an electrically conductive behavior. For this, multi-walled BNNTs (MWBNNTs) impregnated with Co precursor (Co(NO3)2·6H2O) were simply heated at 350 °C under air atmosphere. As a result, diverse shapes of etched structures such as pits and thinned walls were created on the surface of MWBNNTs without losing the tubular structure. The original crystallinity was still kept in the etched MWBNNTs in spite of oxidation. In the electrical measurement, MWBNNTs with a large band gap were converted to electrical conductors after etching by catalytic oxidation. Theoretical calculations indicated that a new energy state in the gap and a Fermi level shift contributed to MWBNNTs being conductive.

Chemical doping has been investigated as an alternative method of conventional ion implantation for two-dimensional materials. We herein report chemically doped multilayer molybdenum disulfide (MoS2) field effect transistors (FETs) through n-type channel doping, wherein triethanolamine (TEOA) is used as an n-type dopant. As a result of the TEOA doping process, the electrical performances of multilayer MoS2 FETs were enhanced at room temperature. Extracted field effect mobility was estimated to be ∼30 cm2 V−1 s−1 after the surface doping process, which is 10 times higher than that of the pristine device. Subthreshold swing and contact resistance were also improved after the TEOA doping process. The enhancement of the subthreshold swing was demonstrated by using an independent FET model. Furthermore, we found that the doping level can be effectively controlled by the heat treatment method. These results demonstrate a promising material system that is easily controlled with high performance, while elucidating the underlying mechanism of improved electrical properties by the doping effect in a multilayered scheme.

With the advances in the separation and purification of carbon nanotubes (CNTs), the use of highly pure metallic or semiconducting CNTs has practical merit in electronics applications. When highly pure CNTs are applied in various fields, CNT networks are preferred to individual CNTs. In such cases, the presence of an electrical path becomes crucial in the network. In this study, we report on the electrical percolation thresholds of semiconducting single-walled carbon nanotube (s-SWCNT) networks, and their electrical characteristics in field-effect transistors (FET). Using the Monte Carlo method, s-SWCNT networks were randomly generated in the channels defined by the source-drain electrodes of the FET. On the basis of percolation theory, the percolation thresholds of s-SWCNT networks were obtained at different channel lengths (2, 6, and 10 μm) by generating random s-SWCNT networks 100 times. The network density corresponding to the electrical percolation threshold was theoretically gained at each channel length. As a result, the network densities at the percolation thresholds for the channel lengths of 2, 6, and 10 μm were 6.8, 9.0, and 9.9 tube μm(-2), respectively. In addition, SPICE calculations were performed for each s-SWCNT network, constituting an electrical path between the source and the drain electrodes of the FET. In all channel lengths, the on/off ratio of the s-SWCNT networks was enhanced with increasing network density. Finally, we found a power law relationship between the on/off ratio of the s-SWCNT networks and the network density at the percolation threshold.