Search

We describe a simple and elegant electropolymerization method to prepare highly stable tetraamino functionalized cobalt phthalocyanine (pTACoPc) at electrochemically reduced graphene oxide (RGO). The described method efficiently bridges the excellent physicochemical properties of RGO with the rich redox chemistry of TACoPc. Graphene oxide was electrochemically reduced to RGO at the electrode surface along with concominent electropolymerization of TACoPc. The electrochemical studies showed that RGO on pTACoP/GCE increased effective surface area, reduced charge transfer resistance and enhanced electrochemical signal. The RGO-pTACoPc film modified electrode exhibits excellent electrocatalytic ability to oxidize cysteine and hydrazine. To determine cysteine, the RGO-pTACoPc sensor displayed a linear concentration range of 50 nM to 2.0 μM, detection limit of 18.5 nM and sensitivity of 10.19 nA nM−1 cm−2. Besides, the sensor displayed a linear concentration range of 50 nM to 2.6 μM, detection limit of 10 nM and sensitivity of 1.62 nA nM−1 cm−2 to determine hydrazine. The electrocatalytic ability of RGO-pTACoPc shows better performance over other cobalt phthalocyanine derivatives. Furthermore, the described sensor exhibited long-term storage stability, good repeatability and reproducibility. The practical applicability of the sensor has been assessed in biological and water samples.

In the present study, a simple and sensitive amperometric enzyme-free glucose sensor was developed at a multiwalled carbon nanotube and cobalt tetrasulfonated phthalocyanine (MWCNT–CoTsPc) modified electrode. The morphology of the fabricated composite was characterized and confirmed by transmission electron microscopy and UV-Vis spectroscopy. UV-Vis spectroscopy results confirmed that the MWCNT–CoTsPc composite was formed via the strong π–π interaction between CoTsPc and MWCNT. Compared with pristine CoTsPc, the MWCNT–CoTsPc composite modified electrode showed a higher electrocatalytic activity and lower overpotential towards the oxidation of glucose. Amperometric i–t technique was used for the determination of glucose. The response of glucose was linear over the concentration ranging from 10 μM to 6.34 mM with a sensitivity of 122.5 μA mM−1 cm−2. The response time of the sensor was determined to be 2 s with a limit of detection of 0.14 μM (S/N = 3). The fabricated sensor also exhibited a good selectivity in the presence of common interfering species. In addition, the fabricated sensor exhibited special advantages, such as low working potential, good sensitivity along with good repeatability and reproducibility, for the determination of glucose.

A simple electrochemical deposition strategy is proposed for the preparation of gold nanoparticles (Au NPs) at the electrode surface using biopolymer pectin as stabilizing agent. The formation of the nanoparticles was confirmed by scanning electron microscopy (SEM), UV-visible spectroscopy and X-ray diffraction (XRD) studies. A pectin-stabilized, gold nanoparticle film-modified glassy carbon electrode (pectin–Au NP/GCE) was prepared, which exhibited excellent electrocatalytic ability towards oxidation of dopamine (DA). At the pectin–Au NP/GCE, the redox couple corresponding to the redox reaction of DA was observed at the formal potential of 0.20 V with highly enhanced peak currents. A thin layer of nafion coating was applied on the pectin–Au NP composite to improve its selectivity. Two linear ranges of detection were found: (1) 20 nM to 0.9 μM with a limit of detection (LOD) of 6.1 nM, (2) 0.9 μM to 1 mM with a LOD of 0.64 μM. The fabricated sensor selectively detects DA even in the presence of high concentrations of interferents. Moreover, practical feasibility of the sensor was addressed in pharmaceutical samples, which presented appreciable recovery results. The main advantages of the sensor are its very simple and green fabrication approach, roughed and stable structure, and fast and highly reproducible detection of dopamine.