Search

We have previously found reversible photo-induced expansion and contraction of organic/inorganic clay hybrids, and even sliding of niobate nano-sheets at the macroscopic level of organic/inorganic niobate hybrids, induced by the molecular photo-isomerization of the polyfluoroalkylated azobenzene derivative (C3F-Azo-C6H) intercalated within the interlayer, which is viewed as an artificial muscle model unit. Based on systematic investigations of the steady state photo-isomerization and transient behavior of the reaction, we comprehended that the phenomena is caused by trapping of excess energy liberated during the isomerization, as well as the relaxation processes upon excitation of azobenzene chromophores in the interlayers of the hybrid. In this paper, quantitative estimation of transient 'heat' trapped in various microenvironments has been studied by each co-intercalation of temperature sensing dye molecules - rhodamine B (RhB) or tris(bipyridine)ruthenium(ii) chloride (Rubpy) with C3F-Azo-C6H within clay (SSA) nano-layers. The amount of dye molecules co-intercalated was kept to trace amounts that did not alter the bi-layered structure of the hybrid. The temperature of the microenvironment surrounding the probe molecules was estimated from the emission lifetime analysis. The evidently reduced emission lifetimes in C3F-Azo-C6H/SSA and C3H-Azo-C6H/SSA hybrids in the film state, indicated the elevation of temperature of the microenvironment upon excitation of the chromophores, which demonstrated our previous hypothesis rationalizing that the high reactivity of isomerization in the hybrid film state is caused by heat trapping via multi-step dissipation of the excess energy. With the hybrid of a hydrocarbon analogue (C3H-Azo-C6H), a distinct difference in temperature gradient was found to show the crucial role of the perfluoroalkyl chain of the surfactant that traps the excess energy to retard its dissipation leading to three-dimensional morphological motion.

A photo-responsive nanoscroll composed of niobate nanosheets and a polyfluoroalkyl azobenzene derivative (C3F-Azo-C6H) is one of the most interesting layered materials because the reversible winding and unwinding motion could be efficiently induced by photo-irradiations. Previously, we have studied a double-walled nanoscroll (DWNS) of niobate that could be synthesized by the intercalation of a cationic polyfluorinated surfactant only into the interlayer I of the layered niobate among the two interlayers, I and II. In this study, we have successfully synthesized another novel photo-responsive single-walled nanoscroll (SWNS) of niobate by a stepwise guest–guest ion-exchange method. All niobate nanosheets that were exfoliated at both interlayers I and II were efficiently converted to nanoscrolls by the intercalation of C3F-Azo-C6H. The synthetic yield has been quantitatively estimated. Though the photo-isomerization reaction of C3F-Azo-C6H was induced in the SWNS, its photo-reactivity was the lowest when compared with those of the nanosheet-stacked film and the DWNS. The photo-reactivity of C3F-Azo-C6H decreased in the order of DWNS > nanosheet-stacked film > SWNS. The different flexibility of the layered miroenvironment might influence the photo-reactivity of C3F-Azo-C6H in the niobate hybrid. The SWNS exhibited a reversible expansion and shrinkage of its interlayer spaces upon photo-irradiation, while the winding and unwinding motion was not observed, contrary to the DWNS. The direction of the expansion and shrinkage of the interlayer of the SWNS was opposite to those of the nanosheet-stacked film and the DWNS. Based on the experimental results, the tilt angle of C3F-Azo-C6H against the nanosheet surface and the matching structures of the top and bottom surfaces of the nanosheet could be the probable key factors that control the photo-reactivity of C3F-Azo-C6H in the layered microenvironment; the morphological changes of the nano hybrids was also discussed.

The second most earth abundant atom incorporated meso-tetrapyridylporphyrinatesilicon(IV) (SiTPyP) as an electrochemical catalyst was newly synthesized. The two axially ligated water molecules on SiTPyP and the four meso-substituted pyridyl nitrogens suffer eight-step protonations and deprotonations. Our detailed pKa study indicated that the two axially ligated water molecules were fully deprotonated to exist as O−–Si–O− under the condition of pH > 2. Under basic conditions, SiTPyP(O−)2 exerted the two-electron oxidation of water to form hydrogen peroxide as the primary product in aqueous acetonitrile, which was initiated through a one-electron oxidation process on the electrode with faradaic yield of 84–92%.

Nano-layered hybrid compounds composed of a polyfluoroalkyl azobenzene surfactant (abbreviated as C3F-Azo-C6H) and layered inorganic nanosheets undergo three-dimensional morphological changes such as reversible shrinkage and expansion of interlayer spaces, and nanosheet sliding by photo-irradiation. Previously, we have investigated the photoreactivity of C3F-Azo-C6H/clay nano-layered hybrids in various microenvironments and found a remarkable enhancement in the photoreactivity for the cis-trans photo-isomerization reaction (Φcis-trans = 1.9). In this paper, nanosecond and microsecond dynamics of trans-C3F-Azo-C6H and its assembly in various microenvironments have been studied by laser flash photolysis to get deeper insight into the extraordinary reactivity of the molecular assembly in the nano-layered microenvironment. In solution, the molecular trans-C3F-Azo-C6H exhibited only a depletion of the trans-form of azobenzene upon the laser pulse excitation. On the other hand, in the case of the C3F-Azo-C6H/clay hybrid film, the depletion of the trans-form was drastically recovered in three steps on nano- and microsecond timescales. This indicates that the once reacted C3F-Azo-C6H molecule (cis-C3F-Azo-C6H) was reverted back to the trans-form after the laser pulse. It is considered that the excess energy provided by the photo-excitation, which is immediately dissipated to the surrounding media through the intermolecular vibrational modes in solution, is trapped in the nano-layered microenvironment to thermally revert the cis-form back to the trans-form. Conversely, in the case of cis-trans isomerization of the C3F-Azo-C6H/clay hybrid film upon photo-irradiation, the reactivity would be much enhanced by the additional contribution of the thermal excess energy efficiently trapped in the nano-layered microenvironment. As compared with the hydrocarbon analogue (C3H-Azo-C6H), the subsequent recovery was very much enhanced in the C3F-Azo-C6H/clay film. The polyfluoroalkyl part of the surfactant layer plays a key role in the retarded dissipation of the excess energy by photo-excitation, which might be coupled with the three-dimensional morphological motion with efficient isomerization reactions.

Photo-responsive nanoscrolls can be successfully fabricated by mixing a polyfluoroalkyl azobenzene derivative and a niobate nanosheet, which is exfoliated from potassium hexaniobate. In this study, we have found that the photo-responsive nanoscroll shows a morphological motion of winding and unwinding, which is basically due to the nanosheet sliding within the nanoscroll, by efficient photo-isomerization reactions of the intercalated azobenzene in addition to the interlayer distance change of the nanoscrolls. The relative nanosheet sliding of the nanoscroll is estimated to be ca. 280 nm from the AFM morphology analysis. The distance of the sliding motion is over 20 times that of the averaged nanosheet sliding in the azobenzene/niobate hybrid film reported previously. Photo-responsive nanoscrolls can be expected to be novel photo-activated actuators and artificial muscle model materials.

A new water-soluble silicon(IV)-tetra(4-carboxyphenyl)porphyrin (SiTCPP) with silicon(iv), the second most abundant element on Earth, in the center of porphyrin was synthesized. Fundamental properties including protolytic behaviour of axially coordinating hydroxy groups, and electrochemical behaviour were characterized. The properties were compared with those of silicon(IV)-tetra(2,4,6-trimethylphenyl)porphyrin (SiTMP) and silicon(IV)-tetra(4-trifluoromethylphenyl)porphyrin (SiTFMPP) and discussed in respect to the electron donating/withdrawing effect of the substituents. Two axially coordinating hydroxy groups of SiTCPP exhibit a four-step protolytic behaviour under the acidic conditions along with a single step protolysis of peripheral carboxyl groups. Though SiTCPP and SiTFMPP did not show any reactivity in the photochemical oxygenation of a substrate with K2PtCl6 as a sacrificial electron acceptor, the first oxidation wave in the electrochemical process of SiTCPP and SiTFMPP showed catalytic behaviour in aqueous acetonitrile solution at any pH condition, in contrast to SiTMP which has only a reversible oxidation wave under neutral and weakly acidic conditions. The criteria for the electrochemical oxidative activation of water and the photooxygenation of the substrate were obtained. The higher oxidation wave of Si-porphyrins than ∼0.86 volt vs. SHE is required for the electrochemical oxidation of water, while suitable protecting groups such as a methyl substituent is a requisite for the photochemical oxygenation with K2PtCl6 as a sacrificial electron acceptor.

Organic-inorganic hybrids composed of polyfluoroalkyl azobenzene surfactant (abbreviated as C3F-Azo-C6H) and inorganic layered compounds are able to undergo reversible three-dimensional morphology changes such as interlayer space changes and nanosheet sliding in a giant scale due to reversible trans-cis isomerization of the azobenzene moiety upon photo-irradiation. In this paper, we have systematically studied the relationship between the layered hybrid microstructures of C3F-Azo-C6H-clay and their photoreactivity for understanding the mechanism of the photo-induced morphology change. The photoreactivity was found to be very much affected by the surrounding microenvironments. As compared with it in solution, the cis-trans photo-isomerization in C3F-Azo-C6H-clay nano-layered film was substantially enhanced with the quantum yield exceeding unity (Φ = 1.9), while the trans-cis isomerization was rather retarded. The corresponding hydrocarbon analogue of the azobenzene surfactant (C3H-Azo-C6H) did not show such an enhancement. The enhancement was discussed in terms of a cooperative effect among adjacent azobenzene moieties along with polyfluoroalkyl chains and the inorganic clay nanosheet to prevent a dissipation of the excess energy being liberated during the photo-isomerization within the nano-layered microenvironment.

The reaction mechanism of the highly efficient (phi = 0.60), selective photochemical epoxidation of alkenes sensitized by CO-coordinated tetra(2,4,6-trimethyl)phenylporphyrinatoruthenium(II) (Ru(II)TMP(CO)), with water acting both as an electron and oxygen atom donor, was investigated. The steady-state light irradiation of the reaction mixture indicated the formation of the Ru(II)TMP (CO) cation radical under neutral conditions, which was effectively trapped by an hydroxide ion to regenerate the starting sensitizer. By means of a laser flash photolysis experiment, the formation of the cation radical as the primary process from the triplet excited state of Ru(II)TMP(CO) was clearly observed. Four kinds of transients were detected in completely different ranges of the delay time: the excited triplet state of Ru(II)TMP(CO) [delay time region20 micros], the cation radical of Ru(II)TMP(CO)(CH3CN) [20-50 micros], the hydroxyl-coordinated Intermediate [I] [50-200 micros], and the cyclohexane-attached Intermediate [II] [200 micros-8 ms]. A reaction mechanism was revealed that involves RuTMP(CO) cation radical formation from the triplet excited state of the sensitizer, followed by attack of an hydroxide ion to form an hydroxyl-coordinated Ru-porphyrin (Intermediate [I]) and subsequent reaction with cyclohexene to form Intermediate [II]. The kinetics for each step of the successive processes was carefully analyzed and their rate constants were determined. The two-electron oxidation of water by one-photon irradiation, as revealed in the photochemical epoxidation, is proposed to be one of the more promising candidates to get through the bottleneck of water oxidation in artificial photosynthesis.