Search

Fouling phenomenon is a key issue for EGR cooler operation. In spite of the fact that soot deposition is imposed by the characteristics of the exhaust gases flow, the design of the EGR cooler has a significant impact for effect on the engine. New combustion modes corresponding to new engine developments and combination of EGR system with other posttreatment devices make that fouling conditions for future generations of EGR coolers can be significantly different from previous applications from Euro 3 to Euro 5. An investigation has been performed in order to characterize the response of different EGR coolers designs for different conditions of the exhaust gases. As for the design, the technology selected has been tube-and-fin heat exchanger, which is a high performance technology that fits Euro 6 customer specifications. The variations in design have been made through modifications in fin characteristics, both in configuration and geometric dimensions. As for engine operation conditions, the exhaust gases characteristics have been modified from a standard calibration to get more severe fouling conditions, in terms of HC content, opacity, exhaust gas temperature and flow. The degradation of performance has been characterized through measurements of thermal efficiency and permeability. It can be concluded that HC content and opacity have a significant influence on fouling phenomena, and that EGR cooler optimum design is highly dependent on these exhaust gas conditions.

This work presents a study to characterize and quantify the mechanical losses in small automotive turbocharging systems. An experimental methodology to obtain the losses in the power transmission between the turbine and the compressor is presented. The experimental methodology is used during a measurement campaign of three different automotive turbochargers for petrol and diesel engines with displacements ranging from 1.2 l to 2.0 l and the results are presented. With this experimental data, a fast computational model is fitted and used to predict the behaviour of mechanical losses during stationary and pulsating flow conditions, showing good agreement with the experimental results. During pulsating flow conditions, the delay between compressor and turbine makes the mechanical efficiency to fluctuate. These fluctuations are shown to be critical in order to predict the turbocharger behaviour.