Search

We studied changes in laser-induced breakdown spectroscopy (LIBS) signal intensity with the thickness of a liquid layer placed on a solid substrate, where an easily evaporating methanol sample was used. For a certain optimal liquid film thickness we obtained a manifold increase of the LIBS signal from methanol. Progressive liquid film thinning leads to a reduction and a successive disappearance of laser-induced splashes; the latter condition drastically reduces the sample consumption and allows measurements to be repeated many times on a single liquid droplet. In following, we developed two methods for actively controlled deformation, i.e., thinning of a liquid droplet (volume ∼10 µl) prior to its sampling by LIBS. Control of the droplet's height was achieved on a Si-SiO 2 wafer substrate by electro-wetting in the case of water solutions or by target rotation in the case of viscous liquids. The chosen substrate also has the advantages of low cost, easy manipulation, and very high purity, thus minimizing interference with analytes. Through the droplet deformation, in a single-pulse excitation at moderate laser energy (70 mJ), we clearly detected Fe and Mn in peanut oil, which represent trace elements in edible oils (∼ 1 part per billion), according to results published in the literature.

The potential of a multi-pulse (MP) laser excitation scheme for deep stratigraphy of electrolytically galvanized steel using laser-induced breakdown spectrometry (LIBS) has been evaluated. For this purpose, a commercial electro-optically (EO) Q-switched Nd:YAG laser was employed, where by reducing the delay between the Q-switch opening and the flash lamp, a train of pulses (up to 11) separated by approximately 7.40 μs was generated during one lamp flashing. Plasma emission after each individual laser pulse of the MP sequence was detected by a spectrograph equipped with an intensified charge-coupled device (iCCD) detector. With MP excitation, the ablation efficiency was increased ten-fold on iron sample and 22.5-fold on zinc material with respect to dual-pulse or single-pulse excitation. The LIBS signal generated by MP excitation shows an analogous enhancement. Although the total energy per shot delivered to samples was only 60 mJ, it was possible using LIBS to measure the sample stratigraphy up to depths of 90 μm on zinc-coated steel sheets. A satisfactory agreement between the Zn thickness determined by the MP-LIBS system and data from the manufacturer has also been obtained.