Search

Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) biocomposites different sisal, containing with the fiber length of 0.25 and 5 mm, and addition of clay particles were prepared by hot compression technique. Silane (Bis(triethoxysilylpropyl)tetrasulfide) treatment has been used to modify, and thus enhance, the properties of related hybrid composites. All composites were subject to water absorption test. The mechanical properties of hybrid composites, such as tensile stiffness and strength, toughness, and hardness, determined tensile, impact, and hardness tests, respectively. It was found that tensile strength, stiffness, and impact strength of long sisal fiber improved with increasing fiber content. Hardness of short sisal fiber improved with increasing fiber content. Treated Silane of long fibers at 20 wt.% loading was found to enhance the tensile strength fiber by 10% and impact strength by 750% as compared with the neat PHBV. Note that this feature was also confirmed by scanning electron microscopy. Moreover, the hardness and water resistance of the PHBV/sisal composites increased with the addition of clay particles. The diffusion coefficient for the PHBV and hybrid composites systems studied was also calculated. [ABSTRACT FROM PUBLISHER]

Hybrid composites composed of polypropylene (PP) or high-density polyethylene (HDPE), different flax fibers (unidirectional, biaxial, and twill2 × 2), and silicon dioxide (SiO2) were produced by hot-press technique. The ternary polymer composite was effectively fabricated by spraying SiO2 solvents onto the surface of flax fiber. The dispersion of SiO2 particles and flax in the composites was studied by scanning electron microscopy. The related PP- and HDPE-based composites were subjected to instrumented falling weight impact test. The thermal and mechanical properties of the composites were determined by thermogravimetric analysis, dynamic mechanical thermal analysis, creep and stress relaxation tests, respectively. It was found that thermal decomposition temperature of the PP or HDPE/flax composites increased by the addition of SiO2 particles. The impact energy, stiffness, creep resistance, and relaxation modulus value of all flax composites increased markedly compared with the PP and HDPE matrix. Time–temperature superposition was applied to estimate the creep and relaxation modulus of the composites as a function of time in the form of a master curve. The activation energies for all the PP and HDPE composites systems studied were also calculated using the Arrhenius equation. The generalized Maxwell model was fairly applicable to the stress relaxation results. [ABSTRACT FROM PUBLISHER]

Composites composed of polylactide (PLA), modified PLA and woven flax fiber textiles (flax weave style of 2 × 2 twill and 4 × 4 hopsack) were produced by hot press technique. Two structurally different additives were used to modify PLA. The dispersion of the flax in the composites was studied by scanning electron microscopy and computed microtomography system (µCT). The PLA composites were subjected to water absorption and instrumented falling weight impact tests. The thermomechanical and creep properties of the composites were determined using thermogravimetric analysis, dynamic-mechanical thermal analysis and short-time creep tests. It was found that the modified PLA and its composite increased the impact resistance compared with the unmodified PLA. Incorporation of flax decreased resistance to thermal degradation and increased water uptake. The impact energy and stiffness value of PLA/flax composites were markedly higher than that of PLA but reflect the effects of composite structures and flax content. The storage modulus master curves were constructed by applying the time–temperature superposition principle. From the master curve data, the effect of modified PLA on the storage modulus was more pronounced in the low frequency range. [ABSTRACT FROM PUBLISHER]