Search

Recycled aggregate concrete has great significance from the environmental protection perspective. However, the current research findings on its hygrothermal properties are sparse. In this study, the apparent density, thermal conductivity, mass moisture content, water vapor permeability coefficient, water absorption coefficient, and liquid water diffusion coefficient of recycled aggregate concrete were determined by experimental methods. The effect of temperature and humidity on thermal conductivity was also studied. Furthermore, the fitting relations of the thermal conductivity of recycled aggregate concrete with the two variables of temperature and relative humidity were presented. The isothermal moisture absorption curve and the fitting relationship of water vapor permeability coefficient with relative humidity were also developed. The results indicate that the thermal conductivity of the eight recycled concrete specimens in the dry state at 25°C ranges from 0.994 to 1.242 W/(m·K). The thermal conductivity increases with the increase in temperature. When the temperature rises from 25°C to 35°C, the thermal conductivity of recycled aggregate concrete increases by 3.8%–13.5%. With the increase of relative humidity, the thermal conductivity of recycled aggregate concrete shows an increasing trend, followed by a steady state, and finally the increasing trend, showing a cubic function relationship between them. When the relative humidity increases from 0% to 95%, the thermal conductivity increases by about 20%. The mass moisture content and the water vapor permeability coefficient increase with relative humidity. The results of this study can provide basic information for the study on the heat and moisture transfer of recycled aggregate concrete, and enhance the database of hygrothermal properties of building materials. [ABSTRACT FROM AUTHOR]

Depending on the data source used, the material hygrothermal properties that are used in the numerical analysis of simultaneous heat and moisture transfer will not be consistent. Differences in measurement methods and the individuality of specimens account for this. It is necessary to choose values from these different physical property sets to conduct a numerical calculation, which can cause the calculated results to differ. The subsequent range of variation in the calculated results should be quantitatively evaluated. In this study, the physical properties of several types of porous building materials were first gathered from four databases. The data were then categorized based on the kind of material and compared in terms of each physical property (density, porosity, specific heat, moisture capacity, thermal conductivity, and vapor permeability). The density, porosity, and specific heat varied by 10% on average, and the moisture capacity, thermal conductivity, and vapor permeability varied by 20% or more for all types of materials. In particular, the vapor permeability of plywood and moisture capacity of gypsum board differed by 50%. The influence that these physical property value variations had on hygrothermal calculation results was then quantitatively demonstrated for moisture and heat flow rate under a step change in the relative humidity or temperature of indoor air for a single layer wall. The moisture and heat flow rate into a single layer wall fluctuated by approximately 10%–40% due to differences in the vapor permeability and moisture capacity of the materials. For all types of materials, moisture was transferred more slowly than heat. Therefore, differences in moisture property values, such as vapor permeability and moisture capacity, influenced the results more significantly. Moreover, the moisture flow was accompanied by a phase change. The differences in moisture property values thus affected the heat flow. [ABSTRACT FROM AUTHOR]

The thermal properties of closed-cell foam insulation display a more complex behaviour than other construction materials due to the properties of the blowing agent captured in their cellular structure. Over time, blowing agent diffuses out from and air into the cellular structure resulting in an increase in thermal conductivity, a process that is temperature dependent. Some blowing agents also condense at temperatures within the in-service range of the insulation, resulting in non-linear temperature dependent relationships. Moreover, diffusion of moisture into the cellular structure increases thermal conductivity. Standards exist to quantify the effect of gas diffusion on thermal conductivity, however only at standard laboratory conditions. In this paper a new test procedure is described that includes calculation methods to determine Temperature Dependent Long-Term Thermal Conductivity (LTTC(T)) functions for closed-cell foam insulation using as a test material, a Medium-Density Spray Polyurethane Foam (MDSPF). Tests results are provided to show the validity of the method and to investigate the effects of both conditioning and mean test temperature on change in thermal conductivity. In addition, testing was conducted to produce a moisture dependent thermal conductivity function. The resulting functions were used in hygrothermal simulations to assess the effect of foam aging, in-service temperature and moisture content on the performance of a typical wall assembly incorporating MDSPF located in four Canadian climate zones. Results show that after 1 year, mean thermal conductivity increased 15%–16% and after 5 years 23%–24%, depending on climate zone. Furthermore, the use of the LTTC(T) function to calculate the wall assembly U -value improved accuracy between 3% and 5%. [ABSTRACT FROM AUTHOR]

In order to improve the comfort of the living environment, the thermal performance and temperature–humidity regulation of the exterior walls of two timber-framed structure buildings is theoretically calculated and experimentally studied in this study. Both of the two buildings are located in Nanjing, China, the hot-summer and cold-winter zone. Then WUFI is used to simulate and predict the changes of temperature, relative humidity, and water content of the two timber-framed structure buildings, to strengthen the theoretical analysis of the thermal and humidity coupling of the external walls, and to propose an optimal design scheme for the insulation and temperature and humidity regulation of the external walls. The main results show that the tested thermal conductivity is basically consistent with the predicted value, which prove that WUFI simulation can effectively predict the thermal insulation performance of the external wall. The two timber-framed structure buildings are both suitable for the cold areas, and the reasonable optimization of the design of the structure is the key to the insulation of the building wall. Timber-framed structure is proved to have good temperature–humidity regulation effect. The moisture content of the two timber-framed structure buildings is stable, and the annual temperature and winter humidity are within the appropriate humidity range, which indicates that the wall design is suitable for Nanjing hot-summer and cold-winter climate zone. Four types of wall structure indoor mold spore germinations are less likely, which is not easy to produce the mold. The above research aims to optimize the design of the energy-saving wall of the timber-framed structure and create a comfortable and healthy living environment. [ABSTRACT FROM AUTHOR]

Interior thermal insulation is frequently one of the only possible solutions for thermal upgrade of the building envelope where the external appearance cannot be changed. In this study, four insulation materials were used in a case study in a historical school building in in situ test walls. The indoor climate in the test room was controlled to simulate the typical dwelling with high moisture load. The temperatures, relative humidity, and heat flows were monitored over 9 months to analyze the hygrothermal performance of four different insulation materials. The hygrothermal performance of insulation materials during drying and wetting periods are presented. Moisture test reference year was used in working out possible energy-renovation solutions. The results show that timing of the renovation works is a matter of consideration to avoid the hygrothermal risks inside the renovated wall assemblies. The results show that in all the cases, thermal comfort can be improved by increasing the inner surface temperature and decreasing thermal conductivity. However, in some cases, the risks of mold growth and interstitial condensation were present inside the retrofitted wall assemblies. Computer simulations of the wall assemblies with moisture reference years under different humidity loads concluded that all solutions are suitable for future analysis. [ABSTRACT FROM PUBLISHER]