Search

The optimal fixation method in total hip arthroplasty (THA) remains controversial. Initial concerns related to the long-term performance of cement fixation as well as cement disease led to the development of cementless implants, and registry data has indicated that the use of this type of fixation has increased in recent years. However, data from these same registries has not shown any improvement in outcomes when compared to cement fixation. On the contrary, while similar outcomes are seen when comparing these fixation types in younger patients (<70 years of age), cementless fixation has shown increased implant failure and revision rates in elderly patients (>70 years of age). Given the increased projected volume of THA in the United States over the next decade, it is important to utilise available data to make clinical decisions that minimise not only individual patient harm, but also the burden on the healthcare system itself. This review provides an overview of currently available outcomes data comparing cement and cementless fixation, as well as an updated analysis of current trends in fixation use in THA. We furthermore provide a comprehensive technique guide to help surgeons optimise cement fixation of the femoral component for THA and hemiarthroplasty. [ABSTRACT FROM AUTHOR]

Introduction: The anatomy of the proximal femur at the time of total hip arthroplasty has been widely studied but the horizontal plane was never considered, or only limited to the torsion of the femoral neck. Methods: Using CT-scan images from a group of 178 patients scheduled for cementless total hip arthroplasty (THA), we analysed the evolution of the torsion of the proximal femoral metaphysis, in reference to the posterior bicondylar plane of the femur. The evolution of the torsion, between 20 mm below the centre of the lesser trochanter and 20 mm above, was evaluated. Results: In cases of primary osteoarthritis, osteonecrosis, rheumatoid arthritis and epiphysiolysis capitis femoris, the mean torsion decreased from 46° to 20° without significant differences in average values between the different diagnoses, but important individual variations were found. In the groups of dysplasia and congenital hip dislocation, the torsion values were significantly higher, decreasing in mean from 59° to 25° and 63° to 34° respectively, and with important individual variations. Conclusions: These data are important when using cementless femoral stems, since an ideal fit-and-fill in the proximal femur zone has been shown to positively influence bone ingrowth of the stem. However, a strict adaptation of the stem to the medullary canal, without considering its torsion, can lead to an increased or decreased torsion of the prosthesis neck and thus to an instability of the arthroplasty. For these reasons, if a perfect adaptation of the stem to the intramedullary anatomy and an optimal reconstruction of the extramedullary anatomy are to be achieved, 3-dimensional planning should ideally be obtained for every patient. This will allow the best stem choice adapted to every single patient and every kind of anatomy. [ABSTRACT FROM AUTHOR]

Background: In cementless hip arthroplasty, the femoral component should obtain firm fixation within the endosteal bone and achieve adequate reconstruction of hip joint biomechanics simultaneously. Previous anatomical studies described age-related changes of the proximal femoral canal, such as canal widening, which theoretically necessitates the use of larger stem sizes in elderly patients. This study examines a potential association between patients' age at surgery and the implant size of a cementless femoral component. Material and methods: A total of 13,423 primary hip arthroplasties with a single cementless stem registered in the Dutch Arthroplasty Register (LROI) were included. Patient characteristics (ie patients' age, sex, height and weight at time of surgery) and femoral component size were derived. A one-way ANCOVA was used to compare the mean stem size between age groups, and multivariable linear regression analysis was used in order to investigate to which extent ageing impacted stem size. Results: Each subsequent age-group (ten-year intervals) had a significantly larger mean stem size than the prior age-group. Multivariable linear regression analysis revealed that age is positively correlated with stem size and that this correlation is more prominent in females than in males (beta = .046, P < .001 and beta = .028, P < .001 respectively). Interpretation: Implant size is positively correlated with age, in particular in females and independently from investigated anthropometric characteristics. The present study endorses that the femoral canal morphology is related to patients' characteristics such as age and sex. The morphology will subsequently influence implant sizing and therefore may have biomechanical and clinical implications. [ABSTRACT FROM AUTHOR]

Background: Hip resurfacing arthroplasty (HRA) typically uses a hybrid design (cemented femoral component and cementless acetabular shell) but has recently been performed with fully cementless components. There is a paucity of information on the clinical performance of these cementless designs. Methods: The UCLA clinical scores, SF-12 quality of life scores, complication rates, survivorship and radiographic signs of loosening or gross stress shielding of 39 hips (39 male patients) implanted with cementless HRA were compared with those of 40 hips (37 male patients) implanted with hybrid HRA during the same time frame. Results: There were no significant differences in postoperative clinical and quality of life scores, complication rates, or radiographic signs of loosening between the 2 groups. The 5-year Kaplan-Meier survivorship was 97.2% for the cementless group and 100% for the hybrid group. This difference was not significant (p = 0.3694). There were no femoral component failures in any of the 2 groups. Conclusions: At a mean follow-up of 6 years, there is no tangible difference between the performance of cementless HRA compared to hybrid HRA. The absence of learning curve associated with this device and the potential for better preservation of femoral neck bone mineral density suggest that this technology is well suited for young patients with good bone quality seeking to resume an active lifestyle including high-impact activities. [ABSTRACT FROM AUTHOR]

Introduction: Total hip arthroplasty (THA) is 1 of the most common procedures in orthopaedic surgery. Different options and implants are currently available. Uncemented hip cups need primary stability for bone ingrowth, the use of screws is required when the desired stability is not achieved. Another option is the use of a hemispherical threaded cup with enhanced primary stability. The purpose of our study was to compare the results of a 3rd-generation threaded cup versus a press-fit cup with a long track record. Materials and methods: A consecutive series of 300 THAs performed by 2 surgeons was retrospectively reviewed, 150 press-fit cups and 150 screwed cups. Minimum follow-up 27 months; maximum 78 months (mean 52.5 months). The primary endpoint was a stable and painless THA, secondary endpoints included Hip disability and Osteoarthritis Outcome Score, Junior and radiographic evaluation. Results: Preliminary results showed no statistically significant differences between the 2 groups for all the evaluated parameters, the number of early mechanical loosening was higher for press-fit cups, but this value was not statistically significant. At a mean follow-up of 52.5 months 1 cup revision (0.3%) was seen in the screwed cup group and 2 (0.6%) in the press-fit cup; these results were not statistically significant. Discussion and conclusion: The main concern for screwed cups is the greater bone loss and possible removal difficulties during revision surgery. This study has some limitations, in particular regarding follow-up, but is still ongoing. Our results showed no difference between the 2 systems. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study was to evaluate the clinical and radiologic outcomes of young patients (under the age of 30) who received a total hip arthroplasty (THA) and in whom patients had been followed for more than 10 years. Materials and methods: This retrospective study was conducted for 51 hips (44 patients) that had undergone THA. The mean age for the index operation was 25.71 years, and the mean follow-up period was 13.7 years. Clinical outcomes were evaluated by Harris hip score (HHS), activity level, and complications. Radiographic evaluations were assessed according to osteolysis, loosening, and polyethylene wear. Results: The average HHS improved from 67.47 pre-operatively to 97.42 at the final follow-up (p < 0.001). The activity level changed from 1.92 pre-operatively to 1.33 at the final follow-up (p < 0.001). Ten cases had undergone revision arthroplasty within the follow-up period, and the overall survival rate was 80.4% at the final follow-up with revision for any reason as the end point. Polyethylene liners were used in all revision cases (p = 0.003). Patients with modular stem had a higher failure rate than patients with a fully porous coated stem (p < 0.001). Furthermore, a small diameter head size was associated with a higher risk of revision surgery (p = 0.003). Complications such as dislocations were found in three hips. Conclusion: Cementless THA yields encouraging clinical and radiological results in young and active patients under the age of 30. However, the bearing surface, type of stem, and head size influenced component durability and revision rate. [ABSTRACT FROM AUTHOR]

Introduction: Total hip arthroplasty (THA) in the young is challenging. The purpose of this study was to retrospectively determine the clinical, radiographic, and polyethylene wear rate of relatively young patients. Methods: We evaluated the outcome of consecutive patients receiving primary THA who were under 40 years of age with a minimum 10-year follow-up. Indications for THA in these patients were osteoarthritis due to developmental dysplasia of the hip joint (9 hips), osteonecrosis of the femoral head (7 hips), juvenile idiopathic arthritis (2 hips), and osteoarthritis due to Perthes disease (1 hip). All THA were performed with a cross-linked ultra-high-molecular-weight polyethylene (XLPE) liner against zirconium heads with cementless implants. Results: The average Japanese Orthopaedic Association hip score significantly improved from 42 to 93 points at the latest follow-up. The mean steady wear was 0.015 mm/year (maximum 0.033 mm/year), and the mean creep wear was 0.111 mm (maximum 0.4 mm). Osteolysis was observed around 1 acetabular component and 2 stems. 1 femoral component had subsidence over 5 mm. All of the femoral components achieved fixation with an optimal interface with spot welds at the latest follow-up. Stress shielding was observed in all hips. Conclusions: THA using an XLPE liner against zirconium heads appeared to have improved THA longevity. However, the imaging findings in some cases were suggestive of wear debris. A rigorous continual follow-up is required for relatively young patients undergoing THA. [ABSTRACT FROM AUTHOR]

Introduction: Trabecular Titanium is an advanced cellular solid structure, composed of regular multiplanar hexagonal interconnected cells that mimic the morphology of the trabecular bone. This biomaterial demonstrated improved mechanical properties and enhanced osteoinduction and osteoconduction in several in vitro and in vivo studies. The aim of this study was to assess Trabecular Titanium osseointegration by measuring periacetabular changes in bone mineral density (BMD) with dual-emission X-ray absorptiometry (DEXA). Methods: 89 patients (91 hips) underwent primary total hip arthroplasty (THA) with acetabular Trabecular Titanium cups. Clinical (Harris Hip Score (HHS), SF-36) and radiographic assessment were performed preoperatively, and postoperatively at 7 days and at 3, 6, 12 and 24 months. DEXA analysis was performed only postoperatively, using the BMD values measured at 7 days as baselines. Results: After an initial decrease from baseline to 6 months, BMD increased and progressively stabilised in all 3 regions of interest (ROIs). Median (IQR) HHS and SF-36 increased from 48 (39-62) and 49 (37-62) preoperatively to 99 (96-100) and 86 (79-92) at 24 months, indicating a considerable improvement in terms of pain relief, functional recovery and quality of life. BMD patterns and radiographic evaluation showed evident signs of periacetabular bone remodelling and osseointegration; all cups were stable at the final follow-up without radiolucent lines, loosening or osteolysis. No revisions were performed. Conclusions: After an initial reduction in periacetabular BMD, all 3 ROIs exhibited stabilisation or slight recovery. Although clinical outcomes and functional recovery proved satisfactory, longer follow-ups are necessary to assess this cup long-term survivorship. [ABSTRACT FROM AUTHOR]

Background: The hip resurfacing concept was developed for young and active patients, especially for femoral bone stock preservation. However, concerns about metal-on-metal bearings with adverse reactions to metal debris have led to a drop off in hip-resurfacing procedures. Questions/Purposes: The goal of this review is to evaluate our current knowledge of survivorship of second-generation hip resurfacing devices and elaborate international perspectives for product improvement. Methods: A comprehensive literature search provided information on national joint arthroplasty registers worldwide with a minimum of 3000 reported hip resurfacings. It culminated in the analysis of six registers. Results: Long-term data showed that available hip resurfacing device survivorship ranged from 95 to 99.7% with 10 years of follow-up, in selected patient populations. The criteria for success were well known, male gender, good bone quality, head component size greater than 48 mm, and cup inclination less than 45°. On the other hand, the recent recall of some hip-resurfacing devices has resulted in huge medico-legal problems and has discredited all implants. It has brought about the recent evolution of hip resurfacing. Femoral fixation is now available for cemented and cementless surfaces. Bearings are still always metal-on-metal, but new types have come on board. Newer designs suggest that ceramic-on-ceramic, cross-linked polyethylene, and oxinium may be applied in this configuration. Conclusions: In 2015, the evolution of hip resurfacing is ongoing in terms of implant design, alternative bearings, and implant fixation with hopes of improving survivorship. [ABSTRACT FROM AUTHOR]

In this case series, we investigated the outcome of cementless total hip arthroplasty (THA) for advanced hip osteoarthritis in patients with residual poliomyelitis to evaluate its clinical usefulness for these patients.~Purpose~Objective~11 unilateral cementless primary THA were performed to arthritic hips in patients with residual poliomyelitis. 7 were in paralytic and 4 were in nonparalytic limbs. The mean follow-up duration was 79.9 months. Retrospective clinical evaluations with various scores and radiological evaluations were made.~Methods~Methods~Harris Hip Score, Western Ontario and McMaster Universities Arthritis Index (WOMAC) and Short-form (SF)-36 physical scales were significantly improved after the surgery. However, UCLA activity score and SF-36 mental scale were not. Because of remaining leg length discrepancies, all but 1 noted a residual limp. In nonparalytic hip, functional acetabular cup inclination during weight bearing significantly increased from installed inclination. Other than 1 case of posterior dislocation, no complications were observed.~Results~Results~Although the overall result itself is excellent, THA for these patients cannot improve limp, physical activity and mental status. Surgeons should be aware of the change of the inclination of acetabular cup during mobilisation, especially for THA in contralateral hip.~Conclusions~Conclusions [ABSTRACT FROM AUTHOR]

The main objective of this study was to evaluate the midterm results of cementless THA with the use of monoblock stems combined with step-cut femoral shortening derotational osteotomy for DDH.~Introduction~Background~A total of 66 hips of 49 patients with Crowe type IV developmental hip dislocation, with a mean follow-up of 90 (range 26-207) months, were reviewed retrospectively. Subtrochanteric step-cut shortening osteotomy and monoblock femoral stems were used. The cup was placed in the true acetabulum in all cases. 21 hips had previous femoral valgisation osteotomies. Anteroposterior and lateral radiographs of both hips were obtained preoperatively and at the last follow-up examination. The Harris Hip Score (HHS) was used for pre- and postoperative clinical evaluation.~Materials and Methods~Methods~The mean HHS increased from 49 to 86 points. A total of 13 hips of 10 patients (the isolated acetabular component in 7 hips of 6 patients, the femoral component in 3 hips of 3 patients, and both components in 2 patients) were revised during the follow-up period. Dislocation occurred in 3 hips, deep periprosthetic infection in 2, superficial wound infection in 2, and femoral vein injury and sciatic nerve palsy in 1. Nonunion was observed in 3 osteotomy sites. 10-year survival probabilities of 91% for femoral components for all cases and 78% for acetabular components were found.~Results~Results~THA with subtrochanteric femoral shortening osteotomy was proven to be an effective technique for avoiding neurological complications for Crowe IV DDH. Cementless THA with the use of monoblock stems showed overall survival rates of 95% at 5 years and 85% at 10 years.~Conclusions~Conclusions [ABSTRACT FROM AUTHOR]

The purpose of this study was to evaluate the results of cementless total hip arthroplasty (THA) using a 32 mm or larger Biolox®delta ceramic-on-ceramic (CoC) bearing in patients with osteonecrosis of the femoral head after a minimum of 5 years of follow-up.~Purpose~Objective~We retrospectively analysed 44 patients (53 hips) who underwent cementless THA using Biolox®delta CoC bearing. There were 33 men (40 hips) and 11 women (13 hips) with the mean age of 49 years. A 36 mm head was used in 42 (79%) of 53 hips and a 32 mm head was used in 11 hips with smaller acetabular shells. The mean duration of follow-up was 5.3 years (range 5-6 years).~Materials and Methods~Methods~The mean Harris Hip Score improved from 50 points preoperatively to 97 points at final follow-up (p<0.001). All acetabular and femoral components showed radiographic evidence of osseointegration. No osteolysis was observed. No patients sustained ceramic fracture. An audible hip noise was identified in 2 (4%) of the 53 hips (1 squeaking and 1 clicking). Survivorship with revision for any reason at a minimum of 5 years was 100% in the best-case scenario and 95 % in the worst-case scenario.~Results~Results~The minimum 5-year results of cementless THA using a 32 mm or larger Biolox®delta CoC bearing in patients with osteonecrosis of the femoral head were encouraging with excellent survivorship. However, it was also found that the risk of noise development remains even for the new alumina matrix composite ceramic.~Conclusions~Conclusions [ABSTRACT FROM AUTHOR]

Background: The clinical results of total hip arthroplasty (THA) with a cementless prosthesis have been constantly improving due to progress in the area of stem design and surface finish. Cementless Spotorno stem (CLS stem; Zimmer, Warsaw, USA) is a double-tapered rectangular straight stem. The purpose of this study is to investigate the mean 10 year results of CLS stem and to evaluate the pressfit stability of CLS stem. Methods: One hundred and eighty-six consecutive patients (194 hips) were evaluated at more than five years after THA using CLS stems. The mean follow-up period was 111 months. The radiographic stability of the femoral stem was determined by Engh's criteria. The ascertained period of spot welds was noted by Gruen zones on the femoral side. The presence of stress shielding, and subsidence was also evaluated. Results: A stable stem with bony on growth was identified in all cases. The mean period of expression of spot welds was 10.8 months in zone 2, 9.9 months in zone 3, 8.5 months in zone 5, and 8.8 months in zone 6. Stress shielding of more than grade 2 was observed in only three hips, which was non-progressive at one year after surgery. Subsidence of more than 2 mm was not observed in any of the hips. Conclusions: Excellent stability of CLS stem has been maintained without abnormal bone reaction at the proximal femur. CLS stem is considered to achieve not only press-fit stability at trochanteric and subtrochanteric level, but bony fixation by osseointegration within one year after THA. [ABSTRACT FROM AUTHOR]

Total hip arthroplasty (THA) after acetabular fracture presents unique challenges, including acetabular fixation. Twelve patients with a history of acetabular fracture underwent THA with porous metal cups. The average age was 57 years (range 24-88). THA was performed at an average 20 months from initial fracture. Average follow-up was 39 months (range 24-49). Average WOMAC scores improved from 32 to 79; UCLA scores improved from 1.75 to 5.25. There was one case of acetabular loosening in a renal transplant patient with rheumatoid arthritis. No other patients showed progressive radiolucent lines. At average three-year follow-up, porous metal components afforded improved clinical and radiographic outcomes in the majority of patients. Longer follow-up will determine whether porous metal is a durable option in the management of prior acetabular fracture. [ABSTRACT FROM AUTHOR]

Background: The short, tapered, collarless Furlong Active stem has been recently associated in the published literature with significant subsidence using Roentgen stereophotogrammetric analysis. Questions/Purposes: The purpose of this study was to analyze the short-term radiographic subsidence in Furlong Active HAP stems and correlate the results with the age, gender, bone morphology, and bone quality of the proximal femur, stem diameter, and medullary canal filling. Methods: Sixty-five consecutive patients (70 hips) receiving the Furlong Active HAP stems were enrolled in this prospective series. The average follow-up was 2.99 ± 1.38 years. All patients were evaluated clinically using the Harris Hip Score (HHS) and radiographically for femoral stem subsidence. In addition, proximal femoral osteopenia, proximal femur morphology, and medullary canal filling were also evaluated. Results: The average subsidence was 2.4 mm (from 0 to 13 mm) at the end of the follow-up period. The average HHS score at the end of follow-up was 90 (range, 81-98). There was one intraoperative fracture. Conclusions: Of the Furlong Active stems 61% subsided with initial weight bearing. Subsidence is higher in males, but no correlation has been found with age, stem diameter, morphology, osteopenia, or canal filling. [ABSTRACT FROM AUTHOR]

Abstract: We retrospectively evaluated the femoral periprosthetic bone mineral density (BMD) in a consecutive series of patients who had undergone total hip arthroplasty (THA) with a straight, double tapered cementless stem using a muscle-sparing anterolateral (group A) and the transgluteal (group B) surgical approach. Dual-energy x-ray absorptiometry (DXA) measurements were performed in the first postoperative week (t1), and after 3 (t2), 6 (t3) and 12 months (t4) using an identical protocol. Patients were clinically and radiographically evaluated at final follow-up (t4). A complete set of four consecutive DXA measurements was obtained for 16 hips in group A and 26 hips in group B. In patients in whom the transgluteal approach was used (Group B), we observed a significantly greater decline in overall periprosthetic BMD (netavg) and in BMD in the periprosthetic regions of interest (ROI) 1, 4, 5 and 6 between t1 and t4. At clinical and radiographic evaluation at t4, no differences between the groups were detected. Femoral periprosthetic BMD is affected by the selected surgical approach in the first postoperative year. This might be attributed to altered femoral loading as a result of differences in intraoperative damage to the abductor muscles. [ABSTRACT FROM AUTHOR]

206 patients age 70 years or older who underwent uncemented total hip arthroplasty (THA) using the Corail stem were studied. Radiographs taken post operatively and at one year were measured for subsidence of the stem. 13 patients had subsidence of the femoral stem of more than 2mm. 5 of these were associated with fractures (mean age 78.06 years - average subsidence 14.52mm), while 8 did not have associated fractures (mean age 77.43 years - average subsidence 4.99mm). These 13 patients were then followed up for an average of 25 months (with fractures) and 26.88 months (without fractures). Radiographs were taken and measured for further subsidence using a VIDAR scanner. There was no evidence of further subsidence in any of the 13 patients, and all the stems had stabilised at one year with good evidence of osteointegration. None of the patients required revision. Uncemented THA using the Corail stem can be employed in this age group and poor bone quality is not a contraindication. [ABSTRACT FROM AUTHOR]

Cementless hemiarthroplasty in hip fracture surgery has been associated with poorer outcomes and more pain than cemented hemiarthroplasty. The aim was to investigate clinical and radiographic outcomes for a cementless tapered titanium fully hydroyxapatite-coated (Corail® System) stem in this consecutive cohort of hip fracture patients. We retrospectively evaluated the results of 68 consecutive elderly patients with displaced intracapsular hip fractures, treated with this implant. Mean clinical follow-up was 4.3 years (2-6 years). One-year mortality was 24%. 95% of patients had no/occasional/mild mid-thigh pain, with moderate pain in 5%. 39% achieved independent or walking-stick mobility. 36 patients had follow-up radiography. Osseointegration was noted in 34, with a mixed bony/fibrous in-growth in 2. One patient had revision for subsidence of an undersized implant, with no conversions to total hip arthroplasty. The Corail® stem can be used effectively for the treatment of femoral neck fractures in the elderly. [ABSTRACT FROM AUTHOR]

Large bearing metal-on-metal (MOM) total hip arthroplasty (THA) may offer advantages relating to stability and range of motion in patients with Crowe Type I and II developmental dysplasia of the hip (DDH). The purpose of this study was to provide an analysis of the clinical and radiological results of MOM THA in this context and compare the results with a cohort of patients treated with metal-on-polyethylene (MOP) bearing surfaces. 75 hips in 65 patients were treated with cementless MOM THA using large femoral heads (36-56 mm). The mean age of the patients was 47.4 years (29 to 59) and 54 were female. A group of 47 hips (41 patients) treated with conventional THA (screwed cup-polyethylene insert-28mm head) was used for comparison. The study group was followed up for a mean of 62.1 months (32 to 76). No difference was found between the two groups in relation to improvement in Harris hip score (HHS) (43.1 to 90.3 points in the study group, 42.6 to 89.5 points in the control group, p>0.05). Although the preoperative range of motion in all planes were similar in both groups, the large head group demonstrated greater motion in all planes postoperatively, which was significant (all p=0.001). Additionally, there was a significant difference between groups in relation to the necessity for acetabular structural graft (8% and 31.9%, respectively; p=0.001). No major complications or adverse reactions to metal debris (ARMD) were observed in the study group. The results of large head MOM THA in young and active patients with DDH are similar to conventional THA at early follow-up, but the former offers the advantages of secure acetabular fixation without screws, greater range of motion, and lower risk of dislocation. [ABSTRACT FROM AUTHOR]

Periprosthetic bone loss is a well documented phenomenon after cementless total hip arthroplasty. We compared the bone mineral density (BMD) in 33 patients using the three dimension taper shape stem and 13 patients with a straight component with a distal taper. Postoperative follow-up was evaluated by dual-energy X-ray absorptiometry. BMD was recorded in seven Gruen zones. BMD was correlated with clinical examination, Harris Hip Score (HHS), Body Mass Index (BMI) and age. Clinical assessment took place at 12 months post operation. Periprosthetic BMD loss using the three dimensional straight tapered stem was consistently much less in comparison with the straight type component with a distal tapered design stem. BMD in Gruen zone 1 was maintained. There was no correlation between periprosthetic bone mineral density and clinical factors. [ABSTRACT FROM AUTHOR]

We studied a consecutive series of 81 cementless total hip arthroplasties in 80 patients using the second generation ESKA cementless spongy metal hip replacement. The study end-point was implant revision and both function as well as satisfaction with treatment outcome were assessed. Mean age at the time of surgery was 50.9 years [range 23-73]. no patient was lost to follow-up and 75 patients (76 hips) could be included in the final analysis at a mean follow-up of 7.9 years [range 7.0-10.0]. survival rate without loosening as the end-point was 100% for the femoral component and 99% for the acetabular component (one cup revision). Two cups and one stem had to be revised for recurrent dislocation, resulting in a total implant survival at follow-up of 99% for the femoral component and 96% for the acetabular component. Very good functional results were obtained with a mean Merle d' aubigné score of 15.5 ± 2.9 at 7.9 years after surgery. satisfaction with treatment outcome was reported in 88%. 95% of patients would recommend the performed procedure to a friend. Perioperative complications without revision occurred in eleven patients (14%). We report excellent survival rates of the cementless spongy metal hip arthroplasty at a mean follow-up of eight years, particularly considering the young age of many of the patients. [ABSTRACT FROM AUTHOR]

The rationale for short stems in cementless total hip arthroplasty (THA) is proximal load transfer and absence of distal fixation resulting in preserved femoral bone stock and avoidance of thigh pain. We report a consecutive series of 65 THAs inserted mainly for osteoarthritis with the DePuy Proxima. hip, a short, anatomic implant with a pronounced lateral flare. Patients were assessed preoperatively and postoperatively at 3, 6 and 12 months and annually thereafter, using the Harris Hip Score (HHS), the Oxford Hip Score (OHS) and standard radiographs. No thigh pain was reported. At a mean follow-up of 1.7 years the HHS improved from a preoperative mean value of 51 to 91 and the OHS decreased from a mean value of 42.5 to 12.4. Complications included 1 intraoperative fracture, 1 superficial infection, and 3 deep vein thromboses. The proximal medial edge of the resected femoral neck appeared rounded off in 49 cases whilst in 16 cases a further loss of medial cortical density was observed. Patient selection and surgical technique are crucial factors contributing to a successful outcome. The surgical technique is different from standard THA. [ABSTRACT FROM AUTHOR]