Search

This study assesses heavy metal content in soil, water, and plant material from sites located around the lignite mine and the power plant “Gacko”, Bosnia and Herzegovina. The samples were collected, prepared, and analyzed for heavy metals content using the flame atomic absorption spectrophotometer. Samples were analyzed for cadmium, lead, copper, zinc, manganese, and iron. To identify the relationship among the metals in samples and their possible sources, Pearson’s correlation and principal component analysis were performed. Health risk assessment was applied to establish potential health risks posed to humans caused by contaminants in different environmental compartments. The results of our analyses show that most soil samples contain copper, and one of those samples had a copper concentration of more than 70 µg/g, which is a critical upper value for agricultural use. In the soil samples that were analyzed, cadmium was also detected, and its concentration was greater than 2 µg/g. Lead, on the other hand, had a concentration that was higher than the maximum permissible for unpolluted soils in 40% of the soil samples that were analyzed. Lead and cadmium concentrations in surface waters mostly contribute to a non-carcinogenic risk in the scenario of recreational swimming exposure. The presence of Cd, a highly toxic element in water, may be explained by the leaching of artificial fertilizers used in the study area, whereas Pb’s origin may be geological. The results of this study recommend routine heavy metal monitoring in samples of soil, water, and plants from the examined area so that, if metal concentrations continue increasing, remedial action should be advised to prevent accumulation in the food chain.

The influences of the application of mono- and two-component organic modifiers on lipophilicity determination of 12 tetradentate Schiff bases by reversed-phase thin layer chromatography were investigated. The main goal is to estimate types of interaction between observed compounds and components of the applied chromatographic systems and establish some behaviour pattern in order to easier choose a combination of organic modifiers which will simulate interaction in biological systems based on the facts that the same basic intermolecular interactions are responsible for the behaviour of substances in both the biological and chromatographic system. The applied organic modifier shows the ability to modify the surface of the applied sorbent, which affects the manifestation of lipophilicity of the observed compounds. Mono-component organic modifiers from different groups of the Snyder triangle were used, as well as their two-component mixtures. In addition, we compared experimentally determined calculated parameters of lipophilicity.

Graphite furnace atomic absorption spectroscopy (GFAAS) was applied to identification of historical pigments. The method is adapted to determine different metals, usually found in pigments. Operating conditions were optimized, such as sample drying step, pyrolysis and atomization temperatures, modifiers, and volume of sample introduced into the atomizer, to reduce interferences due to a complex sample matrix. Using the optimized method pigments in samples from the painting Coronation of the Virgin from the Church of the Shroud of the Holy Virgin in Barič were identified. The samples were analyzed also by Raman microscopy to verify the identification achieved by GFAAS. Raman microscopy confirmed the assumptionsmade based on GFAAS results. Using the two techniques a variety of pigments have been identified, such as calcite, leadwhite, goethite, hematite, ultramarine, vermilion, minium, carbon black. Based on GFAAS results the presence of azuritewas observed in the blue paint sample, although this finding was not confirmed by Raman microscopy.

The influences of the application of mono- and two-component organic modifiers on lipophilicity determination of 12 tetradentate Schiff bases by reversed-phase thin layer chromatography were investigated. The main goal is to estimate types of interaction between observed compounds and components of the applied chromatographic systems and establish some behaviour pattern in order to easier choose a combination of organic modifiers which will simulate interaction in biological systems based on the facts that the same basic intermolecular interactions are responsible for the behaviour of substances in both the biological and chromatographic system. The applied organic modifier shows the ability to modify the surface of the applied sorbent, which affects the manifestation of lipophilicity of the observed compounds. Mono-component organic modifiers from different groups of the Snyder triangle were used, as well as their two-component mixtures. In addition, we compared experimentally determined calculated parameters of lipophilicity.

The influences of the application of mono- and two-component organic modifiers on lipophilicity determination of 12 tetradentate Schiff bases by reversed-phase thin layer chromatography were investigated. The main goal is to estimate types of interaction between observed compounds and components of the applied chromatographic systems and establish some behaviour pattern in order to easier choose a combination of organic modifiers which will simulate interaction in biological systems based on the facts that the same basic intermolecular interactions are responsible for the behaviour of substances in both the biological and chromatographic system. The applied organic modifier shows the ability to modify the surface of the applied sorbent, which affects the manifestation of lipophilicity of the observed compounds. Mono-component organic modifiers from different groups of the Snyder triangle were used, as well as their two-component mixtures. In addition, we compared experimentally determined calculated parameters of lipophilicity.