Search

Sensitizers are used to prepare photosensitive materials for ink-printing and thermal-recording media. Typical sensitizers contain an aromatic ring and exhibit aryl hydrocarbon receptor-mediated activity. They can accumulate in aquatic biota, leading to the disruption of ecosystems. Effluent from paper recycling plants has been identified as a source of contamination, and the presence of sensitizers in toilet paper may represent a new source of contamination in aquatic environments. To examine possible sources of contamination by sensitizers, this study investigated the levels of sensitizers in recycled toilet paper. We also studied the prevalence of sensitizers in rivers receiving effluents from sewage treatment plants in Japan, from 2020 to 2022. We detected eight sensitizers and related compounds in both toilet paper and river water samples; their total concentrations ranged from 0.78 to 34 µg/g (mean: 12 µg/g) in toilet paper and 58–1167 µg/L (median: 77 µg/L) in water. In the water samples, sensitizers were partitioned between liquid and suspended solid phases, and in suspended solids, sensitizers accounted for an average of 42% of the total. Correlation analysis showed a high correlation between sensitizer composition in the water from a river receiving sewage treatment plant effluents and toilet paper. Since these compounds were also detected in the river water analyzed in this study, toilet paper should be considered a novel source of sensitizers contamination in sewage treatment systems. [ABSTRACT FROM AUTHOR]

Background: The mobile device diffusion has increasingly highlighted the opportunity to collect patient-reported outcomes (PROs) through electronic patient-reported outcomes measurements (ePROMs) during the clinical routine. Despite the ePROMs promises and advantages, the equivalence when a PRO measure is moved from the original paper-and-pencil to the electronic version is still little investigated. This study aims at evaluating equivalence between PROMs and ePROMs self-administration in people with multiple sclerosis (PwMS); in addition, preference of self-administration type was evaluated. Methods: The Manual Ability Measure-36 (MAM-36) and Fatigue Severity Scale (FSS) were selected for the equivalence test. The app ABOUTCOME was developed through a user-centered design approach to administer the questionnaires on tablet. Both paper-and-pencil and electronic versions were randomly self-administered. Intrarater reliability between both versions was evaluated through the intraclass correlation coefficient (ICC, excellent for values ≥ 0.75). Results: Fifty PwMS (35 females) participated to the study (mean age: 54.7±11.0 years, disease course: 27 relapsing-remitting and 23 progressive; mean EDSS: 4.7±1.9; mean disease duration: 13.3±9.5 years). No statistically significant differences were found for the means total scores of MAM-36 (p = 0.61) and FSS (p = 0.78). The ICC value for MAM-36 and FSS was excellent (0.98 and 0.94, respectively). Most of participants preferred the tablet version (84%). Conclusion: The results of the study provide evidence about the equivalence between the paper-and-pencil and electronic versions of PROs administration. In addition, PwMS prefer electronic methods rather than paper because the information can be provided more efficiently and accurately. The results could be easily extended to other MS PROs. [ABSTRACT FROM AUTHOR]

In this work, solid-surface fluorescence spectra of Rhodamine B (RhB) and fluorescein (FLU), two extensively used fluorophores, were studied and their concentrations were semi-quantitatively determined using the three-dimensional excitation–emission matrix (3D-EEM) data. In order to measure the solid fluorescence spectra, a trace amount of fluorophores was physically adsorbed on a piece of filter paper as a fluorescent paper, and the fluorescence spectra were recorded from the surface of the fluorescent paper instead of the inner parts of the solution. The spectral measurement was performed utilizing a routine spectrofluorimeter designed to measure the fluorescence of solution only by placing the fluorescent paper in a simple handmade holder at an adjusted incident angle of radiation. The results revealed a significant increase in the fluorescence intensity of the fluorescent paper strip compared to the solution phase. Moreover, in the RhB–FLU paper strip the forster resonance energy transfer was observed between FLU and RhB, similar to the observed phenomenon in the solution phase. For quantifying fluorophores, the EEM data were successfully resolved by applying multivariate partial least squares and parallel factor analysis (PARAFAC) modeling, and the results were compared with the univariate method. This study may provide a general guideline in further developing the solid fluorescence measurement of concentrated solutions or solid samples that have fluorescence measurement limitations such as high self-absorption and highly scattered spectra by using a conventional spectrofluorimeter, and also of biological samples where a trace amount of the analyte is available and high sensitivity is required. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is critical to global industrial and economic development. Recently, India's pulp and paper industries have been facing severe competitive challenges. The challenges have impaired the environmental performance and resulted in the closure of several operations. Assessment and prediction of the performance of the Indian pulp and paper industry using various parameters is a critical task for researchers. This study proposes a framework for performance assessment and prediction based on Data Envelopment Analysis (DEA), Artificial Neural Networks, and Deep Learning (DL) to assist industry administration and decision-making. We presented a case study based on eight industries to demonstrate the methodology's applicability. This study analyses and predicts industry performance based on sample data observations over 30 years. The result suggests the DEA-DL-based efficiency prediction has an overall MSE of 0.08 compared with the actual efficiency. Furthermore, the efficiency rankings are compared between the three techniques. The results suggest that the integrated DEA-DL method is primarily accurate in most scenarios with the actual values. The findings of this study provide a comprehensive analysis of environmental performance for policymakers. [ABSTRACT FROM AUTHOR]

A comparative study of the supramolecular structure, physicochemical properties, and morphology of the powder celluloses (PCs) obtained from the waste paper of newsprint and cardboard, plant celluloses, and nonconventional raw materials was conducted using the methods of FT-IR spectroscopy, high-resolution solid-state 13C NMR spectroscopy, wide-angle X-ray scattering, and scanning electron microscopy (SEM). According to the FT-IR and 13C NMR spectroscopy results, the functional composition of the PCs is similar to that of the wood PCs and matches highly purified cellulose samples. The crystallographic structure of the powder samples corresponds to the structure of cellulose I. The crystallinity and the transverse dimensions of the crystallites are 39.4 and 40.2%, and 45 Å [110] and 54 Å [110], for the PCs from newsprint paper and cardboard, respectively. These values considerably exceed those for the initial waste paper samples. A comparative analysis of the SEM results showed a significant similarity among the PC fibers of different origin. The results of the study of the physicochemical properties of the PCs isolated from the waste paper allow predicting their competitive application in comparison with plant PCs. [ABSTRACT FROM AUTHOR]

The flame spread behavior over a filter paper in opposed flow was investigated on the ISS/Kibo, and the results were compared with the flammability map predicted in advance by scale analysis for a two-dimensional flame. The on-orbit experiments were conducted in the solid combustion experimental module (SCEM) as the first combustion test of the FLARE project by JAXA. A filter paper with a length of 130 mm, a width of 40 mm or 20 mm, and a thickness of 0.12 mm was used as the specimen. The opposed flow velocity and the oxygen concentration were varied from 0 cm/s to 25 cm/s, and from 13.5% to 34%, respectively. The ambient pressure is 101.3 kPa. The predicted limiting curve reasonably agreed with the minimum limiting oxygen concentration observed. On the other hand, in extremely slow flows, very robust flames were observed beyond the limiting curve. When the condition reached the limit of two-dimensional flame, the flame front changed from a linear shape to a spherical shape (flamelet) to shorten the preheat zone length, reducing the radiative heat loss to survive. In these cases, the flamelet was sustained for a long time (> 100 s), and a large amount of decomposed gas was released at the periphery of the pyrolysis zone generating a combustible vapor cloud around the spherical flame font. The presence of a long-life robust flamelet and the accumulation of such combustible mist can be fire hazards in microgravity. [ABSTRACT FROM AUTHOR]

In this paper, by a simple hydrothermal method vertically aligned ZnO nanorod arrays were grown on the carbon fiber paper (CFP) and then through a facile chemical bath deposition method CuO nanosheets were loaded on ZnO nanorod arrays, following by thermal spraying method, carboxylated carbon nanotubes (CCNTs) were successfully integrated with CuO/ZnO@CFP to form a binder-free CuO/ZnO-CCNT@CFP sensor. The sensor shows enhanced sensing activity for baicalein and luteolin determination due to the improved structural integration and synergism of different electrode material components. Remarkably, the CuO/ZnO-CCNT@CFP sensor showed good linear relationships over wide concentration ranges of 0.03–0.70 µM and 0.70–20 µM for baicalein and 0.03–0.45 µM and 0.45–8.5 µM for luteolin detection, with the detection limits of 1.7 nM for baicalein and 0.5 nM for luteolin, respectively. More importantly, the CuO/ZnO-CCNT@CFP sensor was utilized in the simultaneous determination of baicalein and luteolin, delivering linear ranges of 0.4–14 µM (baicalein) and 0.2–6 µM (luteolin) with the limit of detection of 0.05 µM and 0.03 µM, respectively. In addition, the developed CuO/ZnO-CCNT@CFP electrode was further investigated to detect baicalein and luteolin in traditional herbal medicine samples, showing satisfied results in comparison with analytic results from high performance liquid chromatography. [ABSTRACT FROM AUTHOR]

Background The bleach-boosting capability of xylanases is well-known. The use of xylanase pre-treatment before the application of chemical bleach has multiple advantages including (i) lesser use of polluting chemicals of the traditional bleaching process; (ii) less damage to the cellulosic fbers, therefore better recyclability; and (iii) better brightness of chemical bleach. The major impediment in the application is the availability of commercial enzymes that are active at the elevated temperature and pH that exist during the industrial pulping process. In the present paper, xylanase having suitability for application in deinking is reported. Results The xylanase used showed high deinking potential. Optimal deinking was obtained at the xylanase dosing of 20U/g of the dried pulp at 60°C for a treatment time of 1h. It could bring about a 50% reduction in the usage of chemical bleach that was applied after xylanase pre-treatment. The comparison of FTIR spectra showed changes in intensity without signifcant changes in the functional group signatures implying that there is negligible damage to the fber strength in the xylanase pre-treatment process as compared to the chemical bleach process. Conclusion The xylanase used in this study was efective in deinking paper pulp and can be used for bio-bleaching of recycled paper. [ABSTRACT FROM AUTHOR]

Traditionally, cellulose nanofiber (CNF) production has primarily relied on virgin cellulose sources. Yet, the shift to using paper mill sludge (PMS) as a source for CNF underscores the significance of reusing and recycling industrial byproducts. PMS contains significant amounts of cellulose that can be extracted as a raw material. The purpose of present study is to provide a sustainable approach to PMS utilization as a paper coating additive in the cellulose nanofibrils (CNFPMS) form via simply scalable wire-wound rod coating method. The effect of CNFPMS additive amounts at two coating layers on microstructure and surface properties of coatings such as porosity, air permeability surface roughness and optical properties such as brightness, gloss and CIE L*a*b* is studied, which they can also provide insight for the eventual print performance. Results indicated that the obtained CNFPMS in paper coating shows 52% decrease in porosity, presenting significant improvement in the coating microstructure. The marginal increase in permeability coefficient and surface roughness, 54% and 10%, respectively, suggests improving color reproduction and preventing color density losses. Optical analysis showed slight decrease in brightness and gloss, as was expected. Notably, the lightness was improved, which also indicates increasing color gamut volume in printing applications. As a result, the current work offers a sustainable approach to manage PMS for use in paper coatings as a high-value-added material. [ABSTRACT FROM AUTHOR]

Paper is a material that is used in many areas of everyday life. The development of paper with special and environmentally friendly properties will contribute to it being used differently than before. In this work, we present a simple, fluorine-free and low-cost method to prepare a multifunctional paper coating with TiO2 nanoparticles modified with 3-aminopropyltriethoxysilane (KH550) and polydimethylsiloxane (PDMS). The effects of the content of precursors such as titanium isopropoxide (TTIP) and PDMS on the wettability, microstructure and durability of the coating were investigated. The result showed that the coated paper exhibited excellent superhydrophobicity and self-cleaning properties with a water contact angle (WCA) of 162.7° and a water sliding angle (WSA) of 2.5°. In addition, the coated paper showed excellent oil/water separation with over 98% after 10 test cycles and high mechanical resistance with an abrasion resistance of 0.26% weight loss after 20 abrasion cycles using the Taber abrasion test (ASTM D4060) with wheel type CS-10. The results of this study indicate a possible method for producing fluorine-free multifunctional paper, which has the potential to expand the application versatility of the material. [ABSTRACT FROM AUTHOR]

Stone paper is a relatively sustainable alternative to traditional fibre-based paper. Stone paper is made using resin such as high-density polyethylene (HDPE) and a mineral such calcium carbonate (CaCO3). Plasticizers, bulking agents, coupling reagents, dispersing agents, and inorganic fillers are added in the stone paper formulation for imparting different properties. However, the HDPE, used in stone paper formulation, is not biodegradable and can be replaced with biodegradable polymers to make stone paper more environment friendly. The biodegradable stone paper can be easily made using relatively cheaper blown film process. The stone paper can also be made from CaCO3 waste of traditional paper industry and recycled polymer waste. This review paper provides overview about the stone paper, the biodegradable polymeric materials which can be used instead of HDPE, information about the converting processes for stone paper; it's applications and comparison to the traditional paper. [ABSTRACT FROM AUTHOR]

Herein, a convenient, low-cost, and environmentally friendly sorbent based on biopolymer was fabricated and applied for thin-film microextraction (TFME) of cadmium ions from various matrices. The biodegradable cellulose-based filter paper was coated with polyaniline emeraldine salt. The sorbent surface properties were studied by Fourier transform infrared spectroscopy and scanning electron microscopy. The positively charged modified filter paper was utilized as the sorbent in TFME for separation and preconcentration of the anionic complex of cadmium ion (CdI42−). The analyte was then eluted from the sorbent by 0.5 mL of sodium hydroxide (0.5 mol L−1) and determined by flame atomic absorption spectrometry. The extraction conditions including pH, sorption and desorption time, sample volume, and desorption parameters were considered and optimized. At optimum conditions, the method has a linear range of 0.25–25 µg L−1, a limit of detection of 0.06 µg L−1, and an enhancement factor of 198. The method precision values which were calculated as relative standard deviation (RSD%), at 3 µg L−1 cadmium solution were 3.4 (intra-day) and 4.7% (inter-day). The proposed method was successfully applied to the enrichment and trace levels determination of cadmium ions in various environmental water samples. [ABSTRACT FROM AUTHOR]

When replacing equipment at its end of life, industries often have the option to select higher efficiency technologies. The choice to invest in an improved piece of equipment rather than a simple in-kind replacement is driven by many factors, including costs, performance, and familiarity with new technology options. Engineering models that account for equipment stock turnover, such as ENERGY 2020, typically assume that this decision is primarily driven by the difference in marginal costs: higher up front capital costs must be, at minimum, balanced by lower lifetime energy costs for an upgrade to be pursued. Stock turnover analysis requires detailed data inputs regarding the costs and performance of new equipment. For simplicity, a common approach is to develop assumed correlations that reflect the trade-off between marginal capital cost and efficiency and compare these to energy prices to select an efficiency level for new equipment. In this study, we present a novel method to develop such trade-off curves based on a technology-explicit approach rather than a qualitative correlation assumption. We generate trade-off curves for two common types of industrial devices: electric machine drive and natural gas steam generation for the case study of the Canadian pulp and paper sector. The curves demonstrate that the efficiency of new devices can be expected to vary significantly based on energy prices. At current energy prices, we find that newly purchased machine drive and steam generation devices would have an optimal efficiency level of 91% and 75%, respectively. [ABSTRACT FROM AUTHOR]

We examine issues of increasing the stability of the operation of submersible vortex frequency transducers in contact-conductometric vortex flowmeters for wastewater from pulp and paper production. Due to their design, converters of this type are subject to periodic breakdowns because of the oscillations of the sensitive element at a certain critical flow rate. The stability of the operation of these converters is analyzed using the theory of nonlinear impulse systems. It has been established that the flow measurement error increases due to the loss of the output signal flow meter at critical flow. It is shown that the critical flow rate is due to the added mass of the liquid, oscillating together with the sensitive element of the vortex frequency transducer of the flowmeters. The added liquid mass is determined from the frequency characteristics of the sensitive elements of the vortex frequency transducer by using numerical simulation and experimental studies on a special test stand. By using these results the amplitude–frequency characteristics of the sensitive elements are obtained. From comparative analysis of simulation and experimental characteristics we established the additional energy losses during oscillations of the sensitive element. Based on the results of this investigation, requirements for the design of vortex frequency transducers have been formulated regarding choice of mechanical parameters of the flexible electrode, eliminating measurement errors and providing stable operation of the device in the entire range of flow measurements. The results are relevant for organizations involved in the development and the introduction of flow measuring equipment and wastewater monitoring. [ABSTRACT FROM AUTHOR]

The quest for sustainable materials in industrial applications has led to the exploration of biobased monomers for photocurable resins. This study investigates the photopolymerization kinetics and application of eugenol and vanillyl alcohol-based resins for developing hydrophobic coatings on paper. Employing photo-DSC and FT-IR spectroscopy, we analyzed the reactivity and conversion of eugenyl methacrylate (EM) and vanillyl alcohol methacrylate (VAM), alongside their formulations with a hydrophobic additive (PDMS-ECEMS), under various temperatures. Our results reveal that vanillyl alcohol-based resins exhibit faster polymerization and higher conversion rates compared to eugenol-based resins, attributed to their structural differences. The incorporation of PDMS-ECEMS significantly improved the hydrophobicity of the coatings, achieving contact angles (106°) comparable to those of conventional hydrophobic paper coatings. Optimal polymerization occurred at ambient temperatures, with elevated temperatures leading to a faster initial curing rate, but lower overall conversion. This study highlights the potential of using eugenol and vanillyl alcohol-based resins as sustainable alternatives for hydrophobic paper coatings, offering insights into the optimization of photocurable resin formulations for coatings with promising barrier and release performance. [ABSTRACT FROM AUTHOR]

A paper-based analytical device (PAD) with an integrated composite electrode has been designed and fabricated for non-enzymatic creatinine sensing. Reduced graphene oxide (rGO) was employed to modify the PAD so that it could function as a solid-contact transducer. A new macrocyclic pyrido-hexapeptide derivative was made and used as a special ionophore in the creatinine membrane sensor. The synthesized PAD showed a detection limit of 1.0 µM (S/N = 3) and a potentiometric response towards creatinine throughout a log-linear range of 2.0 µM–10 mM (R2 = 0.9998). The sensor shows significant selectivity for a few related substances, including ephedrine, codeine, ketamine, caffeine, urea, urate, carbinoxamine, and dextromethorphan. It has been established that the testing method is appropriate for the direct potentiometric detection of creatinine in a variety of human urine sample types. When an indicating electrode and a reference electrode are put on the same flexible disposable, this lets applications with a small sample volume be done. For point-of-care creatinine measurement, the developed paper-based analytical equipment is a good choice because it is affordable, easily accessible, and self-pumping (especially when combined with potentiometric detection). [ABSTRACT FROM AUTHOR]

Paper-based sensors have good application prospects due to their flexibility and environmental protection. However, paper-based materials are difficult to balance both conductivity and flexibility. This paper mainly reports a high porosity conductive paper based on bamboo wood mixed fiber materials through the wet-manufacture method. The crucial material properties, and long-chain structure of PEDOT:PSS, play an important role in conductivity and flexibility. The relevant experiments show that conductive paper has excellent physical properties and electrical signal transmission capacity. Among them, the conductivity of paper-based electrodes is up to 18.52 S/cm, and there is a low delay in the transmission of the electric signal, when the signal frequency is 300 kHz, the phase frequency angle changes by only 4.9°, not only that, as an electrode, the human pulse signal measured in the capacitive sensor is normal. Under the action of other composite materials, the manufactured electronic paper has a certain mechanical strength, and the thickness is about 90 μm, lower than ordinary paper products. The research shows that the paper-based electrode has the advantages of high conductivity, low hysteresis, light, and thinness, which provides the possibility to be used as a flexible electrode. [ABSTRACT FROM AUTHOR]

The scaling up of the intensity of beams of atomic clusters (nanoparticle beams) creates a new route to the fabrication of functional nanostructured materials. A challenge is to present, to the directed beam, high surface areas of the desired support material, for decoration by the clusters at local sub-monolayer densities. Then, the clusters and their properties can be preserved. Here we employ the Matrix Assembly Cluster Source (MACS) to demonstrate and characterise the deposition of lead clusters, with size of order 2 nm, into planar sheets of porous carbon paper, a material employed in electrode fabrication. We find that clusters are deposited to a depth comparable with the pore size of the carbon, ~ 50 μm, giving rise to a metal loading of ~ 0.05 mg cm−2 of carbon paper. The functionality of the nanocomposite film so created is demonstrated by its use as an electrode for the electrochemical generation of oxidising species suitable for water purification. [ABSTRACT FROM AUTHOR]

Key summary points: Aim: To summarize the literature on medication review and deprescribing in older adults, and formulate recommendations to improve prescribing medications in older, multimorbid adults with polypharmacy. Findings: Current evidence demonstrates a need for a multifaceted and wide-scale change in education, guidelines, research, advocacy, and policy to improve the management of polypharmacy in older people, and to make deprescribing part of routine care for the ageing generations to come. Message: By implementing the recommendations in this paper, healthcare professionals will be better prepared to address the challenges associated with an ageing population and provide high-quality care to older patients with complex health and social care needs. Inappropriate polypharmacy is highly prevalent among older adults and presents a significant healthcare concern. Conducting medication reviews and implementing deprescribing strategies in multimorbid older adults with polypharmacy are an inherently complex and challenging task. Recognizing this, the Special Interest Group on Pharmacology of the European Geriatric Medicine Society has compiled evidence on medication review and deprescribing in older adults and has formulated recommendations to enhance appropriate prescribing practices. The current evidence supports the need for a comprehensive and widespread transformation in education, guidelines, research, advocacy, and policy to improve the management of polypharmacy in older individuals. Furthermore, incorporating deprescribing as a routine aspect of care for the ageing population is crucial. We emphasize the importance of involving geriatricians and experts in geriatric pharmacology in driving, and actively participating in this transformative process. By doing so, we can work towards achieving optimal medication use and enhancing the well-being of older adults in the generations to come. [ABSTRACT FROM AUTHOR]

Plant-fibre ancient-books with cultural significance should be protected from moisture and pollution. In this work, a strategy of surface in-situ protection (building composite coating) was adopted to achieve good hydrophobicity, moisture-proofness and ink-contamination resistance at the surface of archaistic paper. By pre-ring opening of epoxy-based poly(vinyl silsesquioxane) (POSS) and spray of POSS/polyvinylidene fluoride (PVDF) mixed solution, in-situ construction of POSS/PVDF composite coating at the surface of ancient paper was achieved. Compared to water-absorbing ancient paper, POSS/PVDF co-modified ancient paper shows strong humidity resistance. The surface of co-modified ancient paper (epoxy-group pre-ring opening for 45 min) displays high hydrophobicity (water contact angle of ~142.6°), ascribed to greatly improved surface roughness of paper fibres as well as complete coverage of high-content Si/F elements on fibre surface. POSS-modified and neat ancient-paper materials show surface water contact angles of ~113.9° and 0°, respectively. Robust ink-resistance of POSS/PVDF co-modified ancient-paper surface is realized. The innovation in this work lies in perfect synergy of cage-shaped POSS and threadlike PVDF in coating. This work might open a way for surface nondestructive-protection to ancient-books for damp-proof, hydrophobic and anti-fouling characteristics. [ABSTRACT FROM AUTHOR]

Sustainable and low-cost old corrugated container (OCC) paper has been extensively employed in packaging materials for shipping and handling different products to substitute petroleum-based plastics. However, the poor mechanical strength and wet stability of OCC papers impede their general use. To solve these problems, we proposed constructing a dense carboxymethyl cellulose (CMC)-Mn+ (Mn+: Ca2+, Al3+) crosslinked network in the OCC papers' interior, allowing outstanding mechanical performance and waterproof. The resulting OCC-CMC-Al3+ paper demonstrated a superior tensile strength of 49.6 MPa and Young's modulus of 1.9 GPa, substantially higher than that of original OCC paper (tensile strength of 15 MPa, Young's modulus of 0.7 GPa) and comparable to commercial plastics. More significantly, the OCC-CMC-Al3+ paper demonstrated a superior wet strength of 13.0 MPa to the original OCC paper of 0.6 MPa. Additionally, the OCC-CMC-Al3+ paper exhibited excellent thermal stability, durability, and biodegradability. Generally, the biodegradable, strong, and water-resistant OCC-CMC-Al3+ paper is a potential and ecofriendly material for substituting nonbiodegradable plastics. [ABSTRACT FROM AUTHOR]

Creatinine is one of the most important biomarkers to detect renal failures. The electrochemical detection of creatinine has been performed using complex enzymatic and non-enzymatic electrode arrays hindering their commercialization. In this work, a new and practical non-enzymatic electrochemical sensor was fabricated depositing copper on carbon paper electrodes by physical vapor deposition (namely Cu/CP). Surface and cross-sectional SEM images demonstrated the deposition of copper over the 3D structure of carbon paper. A thin film was found on the surface, while Cu nanowires with diameters of 180 ± 30 nm were found inside the 3D structure of CP. The thickness of the Cu film on the tubular structures of CP was of 390 ± 40 nm. High-resolution TEM images indicated that the Cu film was integrated by hierarchical structures containing terminal Cu hemispheres of 17.6 ± 2.2 nm. Additionally, interplanar distances from the selected-area electron diffraction pattern demonstrated the presence of Cu0, while Cu2O was also found. Creatinine concentrations in saliva between 16 and 400 µM indicate kidney failure. The Cu/CP electrochemical sensor detected creatinine with linear concentration ranges from 0 to 1000 µM with a r2 = 0.9936. Outstandingly, this sensor presented good reproducibility (RSD = 7.3%), and selectivity to detect creatinine in artificial saliva using interferents like urea, glucose, glycine, ascorbic and uric acids. [ABSTRACT FROM AUTHOR]

Hydroxyl radical (•OH) detection is pivotal in medicine, biochemistry and environmental chemistry. Yet, electrochemical method–specific detection is challenging because of hydroxyl radicals' high reactivity and short half-life. In this study, we aimed to modify the electrode surface with a specific recognition probe for •OH. To achieve this, we conducted a one-step hydrothermal process to fabricate a CoZnMOF bimetallic organic framework directly onto conductive graphite paper (Gp). Subsequently, we introduced salicylic acid (SA) and methylene blue (MB), which easily penetrated the pores of CoZnMOF. By selectively capturing •OH by SA and leveraging the electrochemical signal generated by the reaction product, we successfully developed an electrochemical sensor Gp/CoZnMOF/SA + MB. The prepared sensor exhibited a good linear relationship with •OH concentrations ranging from 1.25 to 1200 nM, with a detection limit of 0.2 nM. Additionally, the sensor demonstrated excellent reproducibility and accuracy due to the incorporation of an internal reference. It exhibited remarkable selectivity for •OH detection, unaffected by other electrochemically active substances. The establishment of this sensor provides a way to construct MOF-modified sensors for the selective detection of other reactive oxygen species (ROS), offering a valuable experimental basis for ROS-related disease research and environmental safety investigations. [ABSTRACT FROM AUTHOR]

Extracorporeal membrane oxygenator (ECMO) is a valuable technology to support people with acute respiratory distress syndrome (ARDS) and is recommended for COVID-19 patients. This study aims to fabricate polymer-based composite membranes coated with ethylcellulose nanoparticles from waste paper and identify the performance of the composite as ECMO candidates. Composite membranes were made from four types of polymers, namely, nylon, PTFE (polytetrafluoroethylene), Pebax® MH-1657, and SBS (poly-(styrene-b-butadiene-b-styrene)). PDMS (polydimethylsiloxane) 1 wt.% and ethylcellulose nanoparticles (3% and 10 wt.%) were used as membrane coatings to increase their hydrophobic properties. The success of cellulose isolation and ethylcellulose synthesis from waste paper was confirmed by the FTIR and XRD analysis. The size of the synthesized ethylcellulose nanoparticles was 32.68 nm. The coating effect on composite membranes was studied by measuring the contact angle, membrane porosity, protein quantification tests, and single gas permeation of O2 and CO2. Based on the protein quantification test, the protein could not pass through the Pebax/PDMS and SBS/PDMS composites coated with 10 wt.% ethylcellulose; this indicated less risk of plasma leakage. The gas permeation test on nylon/PDMS, PTFE/PDMS, and SBS/PDMS composites coated with 10% ethylcellulose resulted high CO2/O2 selectivity, respectively, 2.17, 3.48, and 3.22 as good indication for extracorporeal oxygenation membrane. [ABSTRACT FROM AUTHOR]

Trimethylsilyl cellulose (TMSC) was employed as the coating matrix for the application of zinc oxide nanoparticles (ZnO) onto paper surfaces and the protections of ZnO/TMSC coating against UV-induced damages and fungal spoilage were evaluated. Filter papers were immersed in 2% w/v TMSC solution loaded with ZnO and air-dried. Three ZnO/TMSC suspensions were prepared with 0.1, 0.5, and 1% w/v ZnO NPs. The presences of ZnO/TMSC protective layers were confirmed with ATR-IR spectroscopy. The coated papers exhibited high surface hydrophobicities. After the coated papers were subject to 365-nm UV irradiation at 400 W for 3 h, the contact angles dramatically dropped. The trimethylsilyl (TMS) groups exposed on the surface formed a moisture barrier and were partially removed on UV exposure. ATR-IR revealed that more TMS groups were removed in the protective layer with no ZnO. UV-irradiated papers turned yellow and papers protected with 1% ZnO/TMSC exhibited significantly lower color changes than that of the uncoated one. Compared to the TMSC-coated paper, the addition of ZnO resulted in a significant reduction in tensile strength at maximum. However, after UV irradiation, significant increases in both the strain at break and strength at maximum were only observed in 1% ZnO/TMSC-protected papers. Regarding their anti-fungal properties, the 1% ZnO/TMSC films were effective in growth inhibitions of Aspergillus sp. and Penicillium sp. on the nonirradiated papers. Despite being hydrophilic after UV-irradiation, growths of the molds were severely suppressed on the UV-irradiated paper. [ABSTRACT FROM AUTHOR]

Nanozymes are nanomaterials that possess intrinsic enzyme mimicking activity. In this study, the application of silver nanoparticles coated filter paper (AgNPs/FP) that exhibits a peroxidase-like catalytic activity as a potential sensor is reported. A simple chemical reduction method was used to produce AgNPs/FP. The formation of the particles on filter paper were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), and surface-enhanced Raman spectroscopy (SERS). In the presence of hydrogen peroxide, AgNPs/FP oxidized the colorless o-phenylenediamine (OPD) and 3,3′,5,5′-tetramethylbenzidine (TMB) solutions to a yellow colored 2,3-diaminophenazine (DAP) and deep blue colored oxidized TMB (oxTMB), respectively. In the presence of thiocyanate, however, the peroxidase-like activity was inhibited in a concentration dependent manner. This makes the AgNPs/FP a promising catalyst and employed for colorimetric detection of thiocyanate via inhibition of the peroxidase-like activity. The application can be further extended to other environmentally and biologically important analytes. [ABSTRACT FROM AUTHOR]

Persistence and misuse of antibiotics eventually give rise to the progression of resistance development in bacteria. Consequently, accurate, fast and cost-effective sensing devices are required to govern the presence of drugs. Herein, we design a microfluidic paper-based device (μPAD) for the detection of Rifampicin. We selected this analyte because of its persistent overuse for the treatment of tuberculosis, among the major causes of death around the world. In this work, we have integrated Fe-reinforced ZnS nanoparticles supported with rifampicin (RIF) imprinted material on the exterior of Whatman filter paper for the fabrication of paper-based microfluidic device (μPAD). In this fabricated μPAD colorimetric detection was performed, and the synergistic effect of Fe and ZnS was recorded as compared to individual nanomaterials. A distinct color indicator was used to quantify the concentration of the targeted substance by the naked eye. The fabricated paper-based sensor possessed high sensitivity for rifampicin detection, recorded linear calibration curve representing 0.1 µM LOD and excellent selectivity, in comparison to other inferring agents present in real samples. The practical application of this designed μPAD was validated by applying a real sample. [ABSTRACT FROM AUTHOR]

Some ancient Chinese paper artifacts dyed with amur cork tree bark extracts are currently preserved to different extents in museums and libraries worldwide. As traditional natural plant dyes, the long-term performance of the amur cork tree bark extract-dyed handmade paper has been questioned under a preserved environment. The photodegradation process of the extract-dyed papers was examined under accelerating artificial UVA irradiation conditions according to China national standard-paper and board- accelerated aging (exposure to light). Changes during aging were analyzed by optical observation and scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectrometry (FTIR), pH, and tensile strength and folding endurance tests. The results showed that the main components from extracted dyes played an important role in affecting the photodegradation properties of dyed paper. The changes in surface color, pH, morphology and mechanical properties after the artificial UVA accelerated degradation tests revealed that a suitable concentration of the extract dyes for maintaining the long-term irradiation stability of the paper is important. [ABSTRACT FROM AUTHOR]

Laccases (EC 1.10.3.2) are considered one of the most prominent multicopper enzymes that exhibit the inherent properties of oxidizing a range of phenolic substrates. Mostly, reported laccases have been isolated from the plants and fungi species, whereas bacterial laccases are yet to be explored. Bacterial laccases have numerous distinctive properties over fungal laccases, including stability at high temperatures and high pH. This study includes the isolation of bacteria through the soil sample collected from the paper and pulp industry; the highest laccase-producing bacteria was identified as Bhargavaea bejingensis, using 16S rRNA gene sequencing. The extracellular and intracellular activities after 24 h incubation were 1.41 U/mL and 4.95 U/mL, respectively. The laccase-encoding gene of the bacteria was sequenced; moreover, the in vitro translated protein was bioinformatically characterized and asserted that the laccase produced by the bacteria Bhargavaea bejingensis was structurally and sequentially homologous to the CotA protein of Bacillus subtilis. The enzyme laccase produced from B. bejingensis was classified as three-domain laccase with several copper-binding residues, where a few crucial copper-binding residues of the laccase enzyme were also predicted. [ABSTRACT FROM AUTHOR]

Improving paper characteristics through natural and cost-effective fillers is a massive issue in the paper industry. In the process of manufacturing paper, inorganic and organic fillers are utilized. Organic fillers are only appropriate for specific applications, and their expensive cost has limited their use. Here, various concentrations of sugarcane press mud (SPM) waste were applied to obtain pure calcium oxide nanoparticles (CaONPs) after the calcination to use as a potential filler in the papermaking by mixing the CaONPs at various ratios (5, 10, 15, and 20%), and paper properties have been investigated. Transmission electron microscopy (TEM), selected area electron diffraction (SAED), scanning electron microscope (SEM), and energy-dispersive X-ray spectroscopy (EDX) were utilized to characterize the CaONPs produced. The finding reveals that the influence of nano CaO fillers filled at different ratios (5, 10, 15, and 20%) on tensile, tear index, porosity, and smoothness was slowly decreased when increasing the content of nano filler to 35.9, 55.0, 565.7, and 260.3 at (0%) decrease to 30.7, 42.4, 381.6, and 188.4 at (20%), respectively. Also, opacity and brightness were increased from 93.0 and 71.7 at (0%) to 99.0 and 72.3 at (20%), respectively. The previous results revealed that the CaONPs at (20%) represent the optimal owing to the small particle size of CaONPs is satisfactory for provoking the prosperities of paper. [ABSTRACT FROM AUTHOR]

Holocellulose fibers provide great potential to make paper with high performance. However, inappropriate reaction conditions may limit its improvement in paper performance due to the lack of sufficient research data. In this work, paper is prepared from the birch holocellulose fibers based on peracetic acid treatment and the papermaking process. The features of resulting holocellulose fibers are evaluated for different peracetic acid treatment conditions such as temperature and time. It reveals that high temperature and long treatment time lead to the degradation of hemicellulose/cellulose and the destruction of fibers, which further results in the poor mechanical performance of paper. By optimization for the treatment condition of holocellulose fibers, the corresponding paper exhibits the highest tensile strength (93 MPa), good bursting strength (601 kPa), and tearing strength (647 mN). The determination of optimum conditions will provide guidelines for the industrial production of holocellulose fibers and paper. [ABSTRACT FROM AUTHOR]

As a promising technology, interfacial solar steam technology has been widely recognized as an effective way to solve the shortage of energy and water, especially in remote areas. Whole roll of toilet paper (TP) is composed of well orderly layer-by-layer paper, which consisted by cellulose fiber. Here, a 3D solar steam generator, which is prepared by carbonized TP with the help of high-temperature carbonization, and NaOH activated under inert atmosphere is firstly demonstrated with excellent freshwater production capacity. Thanks to the good ordered layered structure, which consisted by porous carbon fiber, the evaporation speed of obtained evaporator is up to 3.37 kg m−2 h−1 under one sun (1000 W m−2) in laboratory, and the average value of 20.4 ± 2.98 kg m−2 day−1 in a 20 consecutive days outdoor experiment for treatment of stimulate seawater, respectively. The demonstrated 3D evaporator for per square meter can meet the drinking water demand of more than 10 people. This work not only provides an environmentally friendly, low-cost, easy-to-industrialize preparation for solar assistance interfacial evaporator, but also opens a promising approach for utilizing unique structure of commercialized available artificial materials and technologies to produce fresh water from seawater. [ABSTRACT FROM AUTHOR]

The production of paper is a key component for global civilization. Around 300 million tonnes of paper are produced every day globally, with matured pulpwood being the major contributor. Due to rising demand for paper and the depletion of available wood resources, researchers are now focused on finding alternative non-wood resources that are suitable for pulp and paper production. The current study aims to produce eco-friendly and biodegradable paper using a combination of Eichhornia crassipes (water hyacinth) and dried flowers. Water hyacinth is considered as a lignocellulose plant which contains 57% lignocellulose, and dried flower contains 40% cellulose, which is the prime source for paper production. Various sections of water hyacinth, including wet and dry petiole, leaves, and root, were blended with dried flowers through the soda process. Then, the physical properties and FTIR analysis was carried out to identify the quality of the paper produced. The paper produced from root and dried petiole has a lower thickness (1.0 mm and 0.5 mm) than other mix proportions. The opacity of the leaves was found to be 0.5% (light passing) and for the root 0.7% (light passing). Also, the dry petiole and root paper have a good dry tensile strength of 1.30Kpa and 1.20Kpa, respectively. Hence, paper made from dry petiole and root was found to be efficient and suitable for the paper industry. [ABSTRACT FROM AUTHOR]

Paper and packaging materials a lignocellulose-based natural biodegradable polymer that spontaneously releases acetic acid, aldehydes, alcohol, and ester-based volatile organic compounds (VOCs) upon ageing and these VOCs start degrading the paper products and decline their mechanical strength properties. The reactivity of the paper of unbleached wheat straw pulp towards acetic acid and hexanal, which has been proven to have more degrading effects on paper than other VOCs, was considered in this work. The papers were exposed to these volatile compounds for 90 days in an air-tight vessel under ambient environmental conditions. The results showed that hexanal was more destructive than acetic acid with regards to cellulose degradation and depletion in the mechanical strength properties. The paper properties like, tensile, tear and burst index, viscosity, pH and carbonyl group content was measured. The growth of the carbonyl group, evidence of the ageing effects in the paper, detected more in the paper exposed to acetic acid. However, the strength of paper properties declined more with hexanal. FE-SEM analysis of the sample showed the development of pores and damage of cellulose fibre upon ageing. Similarly, the damaging effects of VOCs on cellulose, hemicelluloses and lignin were confirmed by significantly reduced peak detection through FT-IR \analysis. The high crystallinity index of the paper products due to exposure to VOCs was detected by XRD analysis, which confirmed the degradation of the low molecular weight cellulose molecule. Thus, the results are strongly recommended that VOCs that generates due to natural or artificial ageing could be the leading cause of paper degradation. [ABSTRACT FROM AUTHOR]

Highlights: m-BN/PNF nanocomposite paper with nacre-mimetic layered structures prepared via sol–gel film transformation approach presents excellent thermal conductivity, incredible electrical insulation, outstanding mechanical property and thermal stability. When the mass fraction of m-BN is 50 wt%, m-BN/PNF nanocomposite paper exhibits excellent thermal conductivity and electrical insulation. The λ∥ and λ⊥ are 9.68 and 0.84 W m−1 K−1, and the volume resistivity and breakdown strength are as high as 2.3 × 1015 Ω cm and 324.2 kV mm−1, respectively. The m-BN/PNF nanocomposite paper with 50 wt% m-BN also presents outstanding mechanical properties (tensile strength of 193.6 MPa) and thermal stability (thermal decomposition temperature of 640 °C). With the rapid development of 5G information technology, thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent. In this work, "high-temperature solid-phase & diazonium salt decomposition" method is carried out to prepare benzidine-functionalized boron nitride (m-BN). Subsequently, m-BN/poly(p-phenylene benzobisoxazole) nanofiber (PNF) nanocomposite paper with nacre-mimetic layered structures is prepared via sol–gel film transformation approach. The obtained m-BN/PNF nanocomposite paper with 50 wt% m-BN presents excellent thermal conductivity, incredible electrical insulation, outstanding mechanical properties and thermal stability, due to the construction of extensive hydrogen bonds and π–π interactions between m-BN and PNF, and stable nacre-mimetic layered structures. Its λ∥ and λ⊥ are 9.68 and 0.84 W m−1 K−1, and the volume resistivity and breakdown strength are as high as 2.3 × 1015 Ω cm and 324.2 kV mm−1, respectively. Besides, it also presents extremely high tensile strength of 193.6 MPa and thermal decomposition temperature of 640 °C, showing a broad application prospect in high-end thermal management fields such as electronic devices and electrical equipment. [ABSTRACT FROM AUTHOR]

Traditional papermaking was a significant innovation that intrigued the information-sharing society in a wide range of the globe. The importance of finding the historical background hidden behind the historical traditional paper is critical to understanding societies in history. Advanced molecular biological research is applied to many forensic studies to identify the origin and criminal events. Yet, biological research refrained from the heritage science of traditional papers due to its damage to the samples. The current study explores the Pearson correlation between DNA in traditional paper and non-destructive measurement of characteristics of traditional paper. DNA concentration and purity were found to have a proportional relationship based on the CIEL*a*b* color system. The color of the traditional paper was assessed assessment shows green and yellow rather than red and blue. The DNA concentration demonstrated a positive linear correlation with the peaks of 992 cm−1, 1599 cm−1, and 1628 to 1638 cm−1 region, which were lignin-specific functional groups. The presence of lignin in traditional paper defines the colors green and yellow, which is related to the presence of a cell wall. The quantity of cell walls present is linked to DNA survival during the traditional papermaking process. Furthermore, the partial least square (PLS) regression model is established. The prediction model based on DNA, paper properties, and smoothing + the second derivative preprocessed attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectral data demonstrated valid purity predictions. The evaluation parameter of the cross-validated prediction model contains a low Root Mean Square Error of Cross-Validation (RMSECV) of 0.091 for DNA purity. The determination coefficient was close to 1. However, the further establishment of a validated DNA extraction methodology is required for the consistency of the prediction model for DNA concentration. The hierarchical clustering analysis demonstrated the agglomerative dendrogram on traditional paper samples. For the dendrogram, the Nasu paper mulberry (originating in northern Japan) was distinguished from another paper mulberry (originating in southwestern Japan) by clustering. By multivariate statistical analysis, the DNA presence and quality were predictable from the Japanese traditional papers. In addition, the clustering analysis provided the possible origin of paper mulberry materials for traditional papers. Based on the preliminary information, the need for DNA analysis on historical traditional paper can be determined. [ABSTRACT FROM AUTHOR]

Eco-friendly acid base indicators (anthocyanins) are always a center of attention in quantitative volumetric analysis as substitute for synthetic dye indicators. The purpose of the study is to promote utilization of Punica granatum (pomegranate) peel biomass by developing a novel eco-friendly acid–base indicator for titrimetric analysis. Pomegranate peel extract (PPEx) was prepared by ultrasonic probe sonication, a green method for extraction. The obtained extracts were evaluated for total phenol, anthocyanin content and the color change ability analysis (CIEL*a*b* analysis). The pKa of PPEx was determined, the effectiveness of PPEx as indicator was established in different acid–base titrations and compared with conventional synthetic indicators phenolphthalein and methyl orange. The aspirin powder and tablet (Ecosprin) were analyzed by using PPEx as indicator. An attempt was also made to develop PPEx pH indicator paper. The aqueous and ethanolic PPEx prepared by ultrasonic probe sonication contains 657.1 ± 21 and 718.1 ± 21 mg/LGAE of total phenols and 38.49 ± 0.83 and 42.91 ± 2.10 mgC3G/100gm of anthocyanins, respectively.The PPEx and pH indicator paper shows color change with the pH of solution. The pKa of PPEx was 7.14. PPEx was served as eco-friendly substitute for phenolphthalein and methyl orange indicators. PPEx was effective to analyze aspirin. The statistical analysis ensures the reliability and effectiveness of PPEx as an eco-friendly indicator in acid base titrations as substitute for the synthetic dye indicator. [ABSTRACT FROM AUTHOR]

As China's demand for paper products increases, China's paper industry faces enormous pressure to reduce greenhouse gas emissions. By using material flow analysis in combination with input–output analysis, this study measured the waste paper recovery rate in a more accurate method and analyzed the impact of waste paper recycling on the carbon emissions from China's paper industry. China's waste paper recovery rate estimated in this study was close to 70% in 2017, much higher than that of 48% obtained with the traditional method. The regression results displayed a negative relationship between waste paper recovery rate and CO2 emissions per unit of paper consumption during 2000–2017 in China. The rolling regression results further indicated that the impact of waste paper recycling was becoming stronger on reducing CO2 emissions per unit of paper consumption in China. Since an inverted "U" shape relationship exists between waste paper recovery rate and its reduction effect on carbon emissions from the paper industry, the regression results suggested that China's waste paper recovery rate has not reached the optimal level with regard to carbon emissions from China's paper industry. Thus, although China's waste paper recovery rate has reached a relatively high level, currently waste paper recycling is still an effective method to reduce carbon emissions from China's paper industry. [ABSTRACT FROM AUTHOR]

Renewable materials and material circularity are key priorities for the coming decades. While paper is the most utilized material in the packaging sector, its applications in food packaging are limited due to low barrier properties. Coating it with petroleum-based polymer barrier coatings renders it unrecyclable both mechanically and biologically. Bio-coated paper packaging, made from agricultural waste or by-products, presents environmentally favorable solutions that can benefit the biological cycle of the circular economy. The main objective of this study is to assess the applicability of grain and beer production by-products in wood pulp food packaging materials. It examines the effects of different grain by-products (industrial wheat grain processing residues and wheat bran) particles and concentrations (15 wt% and 40 wt%), as well as the impact of brewer's yeast (Saccharomyces cerevisiae) at a concentration of 10 wt%, on the physical–mechanical and barrier properties of Northern bleached softwood kraft (NBSK) and chemithermomechanical (CTMP) pulps. Material composites were fabricated using a standard sheet forming method. Physical–mechanical properties were analyzed through tensile strength, strain at break, tear resistance, and bending stiffness tests. Barrier-related properties were analyzed through roughness, air permeance, and water contact angle tests. Results revealed that the vast majority of physical–mechanical properties decreased with the increase of both types of grain production fillers. Industrial wheat grain processing residues had a lower impact on physical–mechanical properties than wheat bran filler. A higher percentage of property decrease was absorbed in NBSK pulp than in CTMP. Roughness of CTMP can be improved by adding both industrial wheat grain processing residues and wheat bran. Wheat bran particles can increase hydrophobicity. CTMP pulp strength properties can be increased with the addition of yeast; however, the yeast additive's effect on air permeance demonstrated a negative impact. In the case of NBSK pulp, which has higher primary strength properties, the addition of yeast does not make any significant changes. The conducted experiments demonstrated that, overall, the addition of these fillers resulted in a decline in physical–mechanical properties such as tensile strength, strain at break, tear resistance, and bending stiffness. This decline was more pronounced with higher concentrations of fillers. In the case of CTMP pulp, both types of fillers exhibited similar trends in affecting properties, whereas for NBSK pulp, wheat bran had a more significant impact compared to wheat grain processing residues. The addition of yeast generally led to a reduction in physical–mechanical properties, particularly in tensile strength and tear resistance. However, samples containing yeast displayed increased flexibility compared to controls. The influence on barrier properties varied: while yeast increased air permeability, it also enhanced surface hydrophobicity, thereby reducing the paper's receptivity to liquids. [ABSTRACT FROM AUTHOR]

The economic development of a country directly depends upon industries. But this economic development should not be at the cost of our natural environment. A substantial amount of water is spent during paper production, creating water scarcity and generating wastewater. Therefore, the Pollution Control Board classifies this industry into red category. Water is used in different papermaking stages such as debarking, pulping or bleaching, washing, and finishing. The wastewater thus generated contains lignin and xenobiotic compounds such as resin acids, chlorinated lignin, phenols, furans, dioxins, chlorophenols, adsorbable organic halogens (AOX), extractable organic halogens (EOCs), polychlorinated biphenyls, plasticizers, and polychlorinated dibenzodioxins. Nowadays, several microorganisms are used in the detoxification of these hazardous effluents. Researchers have found that microbial degradation is the most promising treatment method to remove high biological oxygen demand (BOD) and chemical oxygen demand (COD) from wastewater. Microorganisms also remove AOX toxicity, chlorinated compounds, suspended solids, color, lignin, derivatives, etc. from the pulp and paper mill effluents. But in the current scenario, mill effluents are known to deteriorate the environment and therefore it is highly desirable to deploy advanced technologies for effluent treatment. This review summarizes the eco-friendly advanced treatment technologies for effluents generated from pulp and paper mills. [ABSTRACT FROM AUTHOR]

A smartphone-assisted, paper-based ratio fluorescence probe is presented for the rapid, low-cost and on-site quantification of total flavonol glycosides in Ginkgo biloba extracts (GBE). The Al3+/Eu-MOF/paper-based probe utilizes lanthanide metal-organic framework (Ln-MOF) nanoparticles immobilized on Whatman filter paper along with Al3+ for detecting flavonols, which are the hydrolyzed products of flavonol glycosides. The color change of the paper-based fluorescence image from red to orange depends on the concentration of the target analyte in the sample solution. The smartphone equipped with a red, green, blue (RGB) color detector measured the fluorescence signal intensity on the paper substrate after adding flavonol. The analytical variables affecting the performance of the probe, including the addition sequence of the aluminum nitrate solution, its concentration, that of the Ln-MOF solution, the drying time of the paper probe, the reaction time and the sensitivity parameters of the mobile phone camera (ISO), were optimized. Under optimal conditions, the Al3+/Eu-MOF/paper-based probe has good linear response in the concentration range 7 ~ 80 µg mL− 1 and a lower detection limit of 2.07 µg mL− 1. The results obtained with the paper-based ratio fluorescence probe and smartphone combination were validated by comparing them with high-performance liquid chromatography (HPLC) measurements. This study provides a potential strategy for fabricating Al3+/Eu-MOF/paper-based probe used for total flavonol glycosides determination. [ABSTRACT FROM AUTHOR]

Cellulosic packaging containing an active and sustainable coating can prolong the shelf-life of cherry tomatoes, maintaining the nutritional composition and physical integrity. A new and sustainable active material packaging was developed based on the silver-impregnated-zeolite incorporation into chitosan Kraft paper coating. Zeolite (NaY) was modified by cation exchange with silver ion (NaY-Ag) and incorporated into a chitosan filmogenic matrix, forming an active coating on the Kraft paper surface. The active coating paper formulation was defined using an experimental design 22 + central points with independent variables: chitosan concentration (1–2%, w/w) and NaY-Ag zeolite concentration (0.2–1.2% w/w). The efficiency of the ethylene scavenger active packaging material was evaluated by packing a perishable fruit (cherry tomato) and conditioning it for 30 days at 25 ± 2 °C. The cherry tomatoes conditioned in active coating paper presented a weight loss reduction of 29% and maintenance of the texture associated with the adsorption capacity of ethylene gas. After 30 days of storage, the a* color parameter increased by 39%, compared to fruits packed in uncoated packages, which increased the a* values by 79%, indicating a slower rate of ripening of cherry tomatoes packed in the active silver-impregnated zeolite NaY chitosan coating on Kraft paper material. The active packaging systems developed showed a tendency to reduce the ripening rate of the fruit, controlling the ethylene concentration in the headspace, and also could contribute to minimizing the impact that synthetic polymer coatings have on paper degradation, presenting a sustainable characteristic. [ABSTRACT FROM AUTHOR]

To effectively treat the pollutant in sewage, a new-type three-dimensional aerogel based on graphene oxide and waste paper was fabricated via simple mixing and freeze-drying processes. Therein, waste paper was activated in advance, and polyvinyl alcohol served as physical crosslinking agent. The results showed that the obtained aerogel with porous three-dimensional network structure exhibited good thermal stability. When it acted as adsorbent for treating organic dye (methylene blue) and antibiotic (ciprofloxacin), the adsorption process was explored. In single system, the pseudo-first-order and pseudo-second-order kinetic models were used to discuss the detail about the aerogel adsorbing pollutant. Moreover, the Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and calculate the isotherm constants. Thermodynamic results stated that the adsorption of pollutant onto aerogel was feasible and spontaneous. In binary system, the adsorption capacity of methylene blue by aerogel increased, while the adsorption capacity of ciprofloxacin by aerogel declined. The pseudo-second-order kinetics was consistent with the adsorption of pollutant by aerogel in such binary system. This study would provide a new boulevard to develop environmental, low-cost and high-efficiency adsorbent for removing pollutant from wastewater. [ABSTRACT FROM AUTHOR]

The development of fluorometric paper-based analytical devices (fPADs) integrated with smartphone for fluorometric quantification of ethanol in an instrument-free and portable setup is described. The NAD+-dependent alcohol dehydrogenase immobilized within chitosan modified paper substate was utilized as a bio-recognition element and enzymatically generated NADH was used as a fluorescent probe. 3D-printed imaging setup which houses a paper chip holder and UV-light emitting device (LED) was developed for rapid, accurate capture of the fluorescent images. The biocompatible chitosan layer covering the paper provides a feasible environment for enzyme immobilization and enhances the fluorescence signal. The developed fPADs exhibited high sensitivity for ethanol detection and has a linear range for ethanol detection from 17 µM to 8.75 mM (R2 =0.99). Additionally, the fPADs were applied to quantify ethanol in four different wine samples including red, white, rose, and sparkling wines successfully. Moreover, the fPADs produce reproducible signals without loss of enzyme activity for at least 14 days and ~80% activity remained till 28 days. Thus, the proposed approach can provide a facile, affordable, portable, and instrument-free tool for the onsite quantification of ethanol in real samples and is applicable for food quality controls. [ABSTRACT FROM AUTHOR]