Search

The effect of surface modification on enhancing the magnetic heating behavior of magnetic nano fluids were investigated, for this purpose Fe3O4 nanoparticles were synthesized using co-precipitation method and surface modification was done using citric acid, ascorbic acid, tetraethyl orthosilicate (TEOS), polyvinyl alcohol (PVA) and polyethylene glycol (PEG). Experimental heating tests using AC magnetic field were done in the frequency of 100 kHz and different magnetic field (H) intensities. Theoretically the specific absorption rate (SAR) in magnetic nano fluids is independent of nanoparticles concentration but the experimental results showed different behavior. The theoretical SAR value @ H = 12kA.m–1 for Nano fluids containing bare Fe3O4 nanoparticles was 11.5 W/g but in experimental tests the obtained value was 9.72 W/g for nano fluid containing 20,000 ppm of dispersed nanoparticles. The experimental SAR calculation was repeated for sample containing 10,000 ppm of nanoparticles and the results showed increase in experimental SAR that is an evidence of nanoparticles agglomeration in higher concentrations. The surface modification has improved the dispersion ability of the nanoparticles. The Ratio of SAR, experimental, 20000ppm to SAR, experimental, 10000ppm was 0.85 for bare Fe3O4 nanoparticles dispersion but in case of surface modified nanoparticles this ratio has increased up to 0.98 that shows lower agglomeration of nanoparticles as a result of surface modification, although on the other hand the surface modification agents were magnetically passive and so it is expected that in constant concentration the SAR for bare Fe3O4 nanoparticles to be higher than this variable for surface modified nanoparticles. At lower concentrations the dispersions containing bare Fe3O4 nanoparticles showed higher SAR values but at higher concentrations the surface modified Fe3O4 nanoparticles showed better results although the active agent amount was lower at them. Finally, it should be noted that the nanoparticles that were surface modified using polymeric agents showed the highest decrease in experimental SAR amounts comparing theoretical results that was because of the large molecules of polymers comparing other implemented surface modification agents. [ABSTRACT FROM AUTHOR]

The outbreak rate of human coronaviruses (CoVs) especially highly pathogenic CoVs is increasing alarmingly. Early detection of these viruses allows treatment interventions to be provided more quickly to people at higher risk, as well as helping to identify asymptomatic carriers and isolate them as quickly as possible, thus preventing the disease transmission chain. The current diagnostic methods such as RT-PCR are not ideal due to high cost, low accuracy, low speed, and probability of false results. Therefore, a reliable and accurate method for the detection of CoVs in biofluids can become a front-line tool in order to deal with the spread of these deadly viruses. Currently, the nanomaterial-based sensing devices for detection of human coronaviruses from laboratory diagnosis to point-of-care (PoC) diagnosis are progressing rapidly. Gold nanoparticles (AuNPs) have revolutionized the field of biosensors because of the outstanding optical and electrochemical properties. In this review paper, a detailed overview of AuNP-based biosensing strategies with the varied transducers (electrochemical, optical, etc.) and also different biomarkers (protein antigens and nucleic acids) was presented for the detection of human coronaviruses including SARS-CoV-2, SARS-CoV-1, and MERS-CoV and lowly pathogenic CoVs. The present review highlights the newest trends in the SARS-CoV-2 nanobiosensors from the beginning of the COVID-19 epidemic until 2022. We hope that the presented examples in this review paper convince readers that AuNPs are a suitable platform for the designing of biosensors. [ABSTRACT FROM AUTHOR]

The purpose of this work was to fabricate an electrochemical DNA biosensor for detecting hepatitis B virus. Gold nanorods (GNRs), which are known for their conductivity, were used to increase surface area and consequently increase the immobilization of single-stranded DNA (ss-DNA) on the modified gold electrode. The GNRs were characterized via transmission electron microscopy. The morphology of the gold electrode before and after modification with GNRs was characterized by scanning electron microscopy. Atomic-force microscopy was used to evaluate the morphology of the GNR electrode surface before and after interaction with ss-DNA. Cyclic voltammetry was used to monitor DNA immobilization and hybridization, using [Co(phen)] as an electrochemical indicator. The target DNA sequences were quantified at a linear range from 1.0 × 10 to 10.0 × 10 mol L, with a detection limit of 2.0 × 10 mol L by 3 σ. The biosensor had good specificity for distinguishing complementary DNA in the presence of non-complementary and mismatched DNA sequences. [ABSTRACT FROM AUTHOR]

Normal micelle microemulsion method was utilized for fabrication of organically modified silica (ORMOSIL) nanoparticles. The void and dye-doped nanoparticles were synthesized in nonpolar core of two different surfactants including Aerosol OT and Tween 80. The nanoparticles were characterized using transmission electron microscopy, dynamic light scattering, and zeta potential analysis. Our results revealed that the type of surfactant molecules has a dramatic impact on the size and size distribution range, surface charge, and surface functionalization of the nanoparticles. The particles fabricated using Tween 80 had very smaller size with narrow size distribution and very lower amount of zeta potential. For specific delivery of functionalized nanoparticles to breast cancer cell line SKBR3, overexpressing human epidermal growth factor receptor 2 (HER2), both dye-doped nanoparticles fabricated with Aerosol OT or Tween 80, was conjugated to Herceptin. In vitro studies using fluorescent microscopy demonstrated that the surfactant used for preparation of the nanoparticles can affect the uptake of the particles by cells. The dye-doped functionalized ORMOSIL nanoparticles prepared with Aerosol OT showed better efficiency in the process of active targeting of HER2 receptor. Herceptin-functionalized ORMOSIL nanoparticles can be used for differentiation of HER2-positive from HER2-negative breast cancer cells or specific delivery of therapeutic and diagnostic agents and also other nanoparticles such as magnetic nanoparticles and quantum dots to breast cancer cells. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Nanoemulsions are increasingly being investigated for their fascinating capability of loading both hydrophobic and hydrophilic molecules while their stability is still an issue, being affected by various factors. In this study, to evaluate the dominant factors affecting the stability of nanoemulsions, artificial neural networks (ANNs) were implemented. Nanoemulsions of almond oil in water containing oleic acid-coated superparamagnetic iron oxide nanoparticles were prepared using a mixture of Tween 80 and Span 80 as surfactant system and ethanol as a co-surfactant. The ratio of transparency of the samples at 30 min and 7 days after preparation was taken as an indication of the stability of samples. Four independent variables, namely, concentration of nanoparticle, surfactant, oil, and alcohol were investigated to find their relations with the dependent variable ( i.e., transparency ratio). Using ANNs modeling, it was concluded that the stability is affected by all variables, with all variables showing reverse effect on the stability beyond an optimum amount. [ABSTRACT FROM AUTHOR]

Background: Recently, some studies have focused on dendrimer nanopolymers as a magnetic resonance imaging (MRI) contrast agent or a vehicle for gene and drug delivery. Considering the suitable properties of these materials, they are appropriate candidates for coating iron-oxide nanoparticles which are applied in magnetic hyperthermia. To the best of our knowledge, the novelty of this study is the investigation of fourth-generation dendrimer-coated iron-oxide nanoparticles (G4@IONPs) in magnetic hyperthermia and MRI.Methods: IONPs were synthesized via co-precipitation and coated with the fourth generation (G4) of polyamidoamine dendrimer. The cytotoxicity of G4@IONPs with different concentrations was assessed in a human breast cancer cell line (MCF7) and human fibroblast cell line (HDF1). Hemolysis and stability of G4@IONPs were investigated, and in addition, the interaction of these particles with MCF7 cells was assessed by Prussian blue staining. Heat generation and specific absorption rate (SAR) were calculated from measurement and simulation results at 200 and 300 kHz. MCF7 and HDF1 cells were incubated with G4@IONPs for 2 h and then put into the magnetic coil for 120 min. Relaxometry experiments were performed with different concentrations of G4@IONPs with T1- and T2-weighted MR images.Results: The TEM results showed that G4@IONPs were 10 ± 4 nm. The in vitro toxicity assessments showed that synthesized nanoparticles had low toxicity. The viability of MCF7 cells incubated with G4@IONPs decreased significantly after magnetic hyperthermia. In addition, MR imaging revealed that G4@IONPs improved transverse relaxivity (r2) significantly.Conclusions: Our results encouraged the future application of G4@IONPs in magnetic hyperthermia and MR imaging. [ABSTRACT FROM AUTHOR]