Search

This research presents two helical capillary tube sizing charts for R407C and R410A, two correction charts for another tube size, and a correction chart for all mixture ratios of R125, R134a and R32. These charts are obtained from the homogeneous flow model including the effect of gravitational force. It is verified by comparison with experimental data obtained from the published literature. From the model, the sizing charts for a diameter of 1.63mm, length of 2.03m, and helix diameter of 500mm are developed. Two charts for size correction are also developed. The first one is for tube diameter of 0.5-5mm and length of 0.25-10m. The second one is for helix diameter of 20-1000mm. Finally, one more chart for mixture ratio correction is proposed. This chart can be applied to all mixture ratios of R125, R134a and R32. [ABSTRACT FROM AUTHOR]

Based on the Princeton Ocean Model (POM), the seasonal thermohaline feature and the ocean circulation in the Gulf of Thailand (GoT), situated between 6°N to 14°N latitude and 99°E to 105°E longitude, were studied numerically with 37 × 97 orthogonal curvilinear grid and 10 vertical sigma levels conforming to a realistic bottom topography. A spin-up phase of the first model run was executed using wind stress calculated from climatological monthly mean wind, restoring-type surface heat and salt, and climatological monthly mean fresh water flux data. In this paper, the temperature and salinity fields taken from Levitus94 data sets and the calculated temperature and salinity from the model run for 12-month mean and for each season are presented where the winter, summer, rainy, and end of the rainy seasons of Thailand are represented by the months January, April, July, and October, respectively. The simulated circulations are also described. The results show that the temperature in the GoT is warmer than the temperature of the other parts connected to the South China Sea (SCS). At any depth of inflow from SCS into the GoT, the salinity is high, but in the outflow from the GoT at the surface, the salinity is low. The strong circulations are clockwise during summer and the rainy seasons of Thailand, which are the East Asian monsoon periods, northeasterly and southwesterly during summer. They occur near Pattani and Narathiwat provinces during summer and in the central GoT during the rainy seasons. Sensitivity experiments were designed to investigate the effects of wind forcing and open boundary conditions. Wind forcing is shown to be the important factor for generating the circulation in the GoT. The lateral velocity at the open boundaries is of considerable importance to current circulation for the rainy and end of the rainy seasons, with insignificant effect for the winter and summer seasons of Thailand. [ABSTRACT FROM AUTHOR]

As novel technologies have been developed, emissions of gases of volatile organic compounds (VOCs) have increased. These affect human health and are destructive to the environment, contributing to global warming. Hence, regulations on the use of volatile organic compounds have been strengthened. Therefore, powerful adsorbents are required for volatile organic compounds gases. In this study, we used graphene powder with a mesoporous structure to adsorb aromatic compounds such as toluene and xylene at various concentrations (30, 50, 100 ppm). The configuration and chemical composition of the adsorbents were characterized using scanning electron microscopy (SEM), N2 adsorption-desorption isotherm measurements, and X-ray photoelectron spectroscopy (XPS). The adsorption test was carried out using a polypropylene filter, which contained the adsorbents (0.25 g), with analysis performed using a gas detector. Compared to graphite oxide (GO) powder, the specific surface area of thermally expanded graphene powder (TEGP800) increased significantly, to 542 m2 g−1, and its chemical properties transformed from polar to non-polar. Thermally expanded graphene powder exhibits high adsorption efficiency for toluene (92.7–98.3%) and xylene (96.7–98%) and its reusability is remarkable, being at least 91%. [ABSTRACT FROM AUTHOR]

This study presents a case study of energy management in a sugar factory in Turkey. The main idea of the study is to analyse energy consumption, the quantity of material production, and figure out a suitable energy efficiency for the case study of a sugar factory subsequently. Firstly, a material production and energy consumption audit were performed for the sugar factory. Secondly, energy efficiency was calculated from the energy data. The SPSS (Statistical Package for the Social Sciences) statistical software was used to ensure the accuracy of the data. The factory’s energy consumption was calculated as 43,590.25 toe (tons of oil equivalent) over the last year. These results were used for CUSUM (Cumulative Sum Deviation Method) graphics. This research poses the consumption of energy, cost of energy and the relationship between energy usage and material production of sugar. The unit of energy cost was 688.22 [$/toe] for the last year. This result showed that the factory decreased the unit of energy by optimisation. The results indicated that the investigated sugar factory should pay attention to the energy management issue in order to comply with the Energy Efficiency of Turkish Law and Directives. [ABSTRACT FROM AUTHOR]