Search

This paper presents a study on the stability of a mine entry of an innovative approach to non-pillar coal mining—gob-side entry retaining using cantilever beam theory (GERMC). This method is on the rise in China and it has shown to increase the coal seam rate of recycling and mining productivity. The method utilizes the caved-in material resulting from the mining activities to fill the gob area and ensure the stability of the roof of the already mined area. The caved-in material will form the gob-side wall of the retained entry. This characteristic is unique to this method. Thus, there are not many studies that analyze the stability of the filling material and of the gob-side entry wall under these circumstances, which is a vital element for the safety of the mining operations. This paper studies the stability of the gob-side retained entry of the Hongjingta underground coal mine in China. The authors perform the analysis using a discrete fracture network (DFN) model developed by the Massachusetts Institute of Technology (MIT), GEOFRAC, in combination with the discrete-element method (DEM) software UDEC. GEOFRAC estimates the rock blocks (fracture networks) in the filling body, from fracture traces measured along the gob-side wall of the entry. Statistical methods are used to estimate the fracture intensity and the mean fracture areas, which are inputs to the DFN. The generated fracture networks are then inputted into the DEM code, UDEC, to evaluate the stability of the mine-retained entry. For this study, we developed two types of models in UDEC, one considering the fractures generated by the DFN model and another considering the gob-filling material as a continuum. This methodology—combined DFN–DEM—is unique and provides a more realistic representation of the gob-filling material by considering the fractures in the filling body and by estimating those fractures (interfaces between rock blocks) using field data. In addition to this, we also considered the effects of uncertainties that are associated with estimating three-dimensional (3-D) fractures' networks/rock blocks from two-dimensional (2-D) field data. Finally, the results of the simulations were compared with the measurements from the mine and are in good agreement. [ABSTRACT FROM AUTHOR]

With the increasing tension of current coal resources and the increasing depth of coal mining in China, Non Coal Pillar Gob-side Entry Retaining Technology has become a preferred coal mining method in underground coal mines. In the current study of the non coal pillar gob-side entry retaining mining with roof cutting and pressure releasing, the theory and design of roof cutting under near-level conditions have formed a certain system. However, there is a lack of systematic research on the design of the roof cutting and the connection requirement of the cutting seam and other aspects about the inclined coal seam. Therefore, choosing the concrete representative target mines as the research foundation, using mechanics analysis, geometric analysis, numerical simulation and other means, on the basis of considering the change of mining height, this paper mainly studies about the effect of coal seam inclination on roof slit depth and angle, then get the three steps of the cutting height design, the three considerations of the roof cutting angle design and the connection rate requirement of the roof cutting. At last the key roof cutting parameters of the three target mines are calculated accordingly. Based on the existing research, this paper puts forward the concept and design method of roof cutting connectivity rate. The design system of roof cutting seam parameters of non coal pillar gob-side entry retaining mining with roof cutting and pressure releasing is further improved, and the corresponding calculation method is deduced for the design of the key parameters of the inclined coal seam and the gently inclined coal seam, and proposing the second roof cutting scheme of the upper side gob-side entry retaining. [ABSTRACT FROM AUTHOR]

The demand for gob-side entry retaining (GSER) technology is extensive in Chinese coal mines because of its outstanding advantages. However, due to the occurrence of long-term roof movement disturbances, maintaining the conventional GSER over long distances is difficult. The urgent demand for this technology and its difficult maintenance are prominent contradictions faced in its application. In this paper, two characteristics of strata movement after mining that have great influence on GSER are determined in a physical simulation experiment. One is that the roof layers, which are dominated by the key strata (KS), collapse in multiple groups to form two-directional periodic pressures and superposed disturbances. The other is that the movement of the main roof will experience three stages of deformation, as follows: bending subsidence before collapse, sinking deformation at collapse and compressive deformation after collapse. In particular, the gradual compression of the bulging gangue in the gob extends the disturbance cycle. Therefore, it is difficult to maintain the GSER over long distances because of the long-term and multiple breaking disturbances of the roof layers. Mechanical models of KS breaking and GSER are established, and a method to determine the timing and strength of KS disturbances are proposed. Making use of the characteristics of staged collapse and fluctuating weighting of the overlying strata, an innovative technology named short-staged GSER is proposed. This technology maintains the maximum length of GSER within the optimal length, which ensures that the entry avoids superposed disturbances, and reduces the maintenance difficulty. The method for determining the key technical parameters is discussed, and an engineering case in panel 24202 of the Shaqu Mine in China is presented. From a back-calculation of measurements, the engineering practice demonstrates that the surrounding rock mass is stable, and the deformed entry size is safe when the length of the short-staged GSER does not exceed 100 m. [ABSTRACT FROM AUTHOR]