Search

This study examines the magnetohydrodynamic flow of hybrid silver-alumina (Ag-Al 2 O 3 )/water nanofluid within a corrugated trapezoidal cavity that contains a heat-generating rotating solid cylinder. The hybrid nanofluid flow and convective heat transfer are modelled using a single-phase approach. The governing equations for fluid flow and convective heat transfer are solved using the penalty finite element method. The finite element algorithm was validated against previously published work, and it was found to be in good agreement with the existing literature. We investigate the effects of the Ag and Al 2 O 3 nanoparticle diameters and the radius of the heat-generating solid cylinder on streamlines, isotherms and average Nusselt number. The results of this study reveal that the flow circulation regions near the rotating cylinder are enhanced with increased nanoparticle diameters and cylinder radius. Moreover, the nanofluid temperature and heat transfer rate are increased with reduced nanoparticle diameters and increased cylinder radius. [ABSTRACT FROM AUTHOR]

Single-phase nanofluid heat and mass transfer futures over swirling cylinder with the impact of Cattaneo–Christov heat flux and slip effects is studied in this analysis. The effects thermophoresis, thermal radiation, Brownian motion and chemical reaction are also considered and the motion of the fluid is because of the torsional motion of the cylinder and these parameters. Suitable similarity transformations are implemented to simplify the fluid equations from partial differential equations to ordinary differential equations. The most powerful finite element technique is applied to solve the subsequent equations along with boundary conditions. Variations in the scatterings of swirling velocity, axial velocity, concentration and temperature with several pertinent parameters are portrayed through plots. Nusselt number, both components of skin friction coefficient and Sherwood number values are also examined in detail and are revealed in tables. Temperature sketches diminish in nanofluid region with rising values of heat flux relaxation number. It is detected that the nanofluids temperature deteriorates with augmenting values of temperature slip parameter. The present numerical code is validated with existing literature. [ABSTRACT FROM AUTHOR]

The ultimate goal of the present review paper is to summarize and discuss the findings of the most recently published literature on natural convection of nanofluids in various enclosures. The review covers five different geometries of enclosures: square, circular, triangular, trapezoidal, and unconventional geometries. The core findings of the reviewed papers are summarized and tabulated in a table. Moreover, the relation between the thermophysical properties and the way they affect each other is demonstrated for different geometries of enclosures. Various numerical methods, such as finite difference, finite volume, and finite element methods, as well as different microscopic models, such as single-phase and two-phase models, are considered in this review. [ABSTRACT FROM AUTHOR]

The current problem is performed to analyze the heatline visualization of the mixed convection mechanism and heat transfer in a double lid-driven square cavity having a heated wavy bottom surface. The moving vertical surfaces are under adiabatic conditions, and the top surface is at a cold temperature. The finite element method is employed to determine the dimensionless governing equations controlled by specific boundary conditions. The implications of the Reynolds number ( 10 ≤ Re ≤ 500 ), the directions of the constant moving wall ( λ l = ± 1 , λ r = ± 1 ), Richardson number ( 0.01 ≤ Ri ≤ 100 ), Prandtl number ( 0.015 ≤ Pr ≤ 10 ) and the number of oscillations ( 1 ≤ N ≤ 4 ) are visualized by the streamlines, isotherms and the heatlines. The same direction of lid-driven cases leads to two primary circulation cells. The Richardson number increases as it imposes the increment of the vertical temperature gradient. At a high Prandtl number, the convection mode of heat transfer is fully established, and heat conduction occurs at a low Prandtl number. Moreover, the number of oscillations has the most significant direct impact on the streamlines and the temperature distributions compared to the flat surface. Higher Reynolds and Prandtl numbers result in an increment in the local and average Nusselt numbers. The result shows that one oscillation of the wavy surface with a low Richardson number yields to have an optimum heat transfer in the cavity. [ABSTRACT FROM AUTHOR]

The entropy production and mixed convection within a trapezoidal nanofluid-filled cavity having a localised solid cylinder is numerically examined using the finite element technique. The top horizontal surface moving at a uniform velocity is kept at a cold temperature, while the bottom horizontal surface is thermally activated. The remaining surfaces are maintained adiabatic. Water-based nanofluids ( Al 2 O 3 nanoparticles) are used in this study, and the Boussinesq approximation applies. The influence of the Reynolds number, Richardson number, nanoparticles volume fraction, dimensionless radius and location of the solid cylinder on the streamlines, isotherms and isentropic are examined. The results show that the solid cylinder's size and location are significant control parameters for optimising the heat transfer and the Bejan number inside the trapezoidal cavity. Furthermore, the maximum average Nusselt numbers are obtained for high R values, where the average Nusselt number is increased by 30% when R is raised from 0 to 0.25. [ABSTRACT FROM AUTHOR]

In the current study, magnetohydrodynamics mixed convective flow of Ag–MgO/water hybrid nanofluid in a triangular shaped partitioned cavity involving a porous layer is numerically investigated by using the finite element method. In the numerical simulation, various effects of pertinent parameters such as Richardson number (between 0.01 and 100), Hartmann number (between 0 and 60), magnetic field inclination angle (between 0 and 90), Darcy number (between 10 - 4 and 5 × 10 - 2 ), location of the vertex of triangular porous region (between 0.2 and 0.8 H) and hybrid nanoparticle solid volume fraction ( ϕ 1 between 0 and 0.01, ϕ 2 between 0 and 0.01) on the fluid flow and convective heat transfer features are examined. It was observed that a large vortex is established below the main vortex near the upper wall for the lowest value Ri number. At the highest magnetic field strength, multi-recirculation flow pattern is seen in the right bottom corner. The average heat transfer enhances with higher values of permeability of the porous medium, magnetic field inclination angle, distance of the porous layer vertex from the hot wall and solid nanoparticle volume fraction of each particles in the hybrid nanofluid. The impact is reverse for higher values of Richardson number and Hartmann number. In the current work, significant changes in the average Nusselt number are obtained by varying the location of the porous medium. The triangular shaped porous compound can be used as an excellent tool for convective heat transfer control. [ABSTRACT FROM AUTHOR]

In current attempt, nanoparticle Electrohydrodynamic transportation has been modeled numerically via control volume based finite element method. Mixture of Fe3O4 and Ethylene glycol is elected. Impact of radiation parameter (R d) , voltage supplied (Δ φ) , nanoparticle concentration, Permeability and Reynolds number have been displayed. Results display that permeability and thermal radiation can improve temperature gradient. [ABSTRACT FROM AUTHOR]

In this work, magneto-hydrodynamic natural convection of a nanofluid in a wavy cavity considering Brownian motion is studied numerically using the control volume finite element method. The effective viscosity and thermal conductivity of the nanofluid are defined by the correlation in which the impact of Brownian motion on the thermal conductivity is considered. The considered wavy cavity is heated from the left side and it cooled from the right side. Also, the top and bottom walls of the considered wavy cavity are assumed adiabatic. The impacts of various controlling parameters such as the Rayleigh number, wavy contraction ratio, Hartmann number and undulation number are examined on the contour maps of the streamlines and the isotherms. Further, the average and local Nusselt numbers are calculated and presented graphically and discussed. The findings narrate that the strength of the convective flow has a direct relationship with the Rayleigh number and also it has a reverse relationship with the wavy contraction ratio. [ABSTRACT FROM AUTHOR]

In this study, natural convection of CuO-water nanofluid in a square cavity with a conductive partition and a phase change material (PCM) attached to its vertical wall is numerically analyzed under the effect of an uniform inclined magnetic field by using finite element method. Effects of various pertinent parameters such as Rayleigh number (between 105 and 106), Hartmann number (between 0 and 100), magnetic inclination angle (between 0∘ and 90∘), PCM height (between 0.2H and 0.8H), PCM length (between 0.1H and 0.8H), thermal conductivity ratio (between 0.1 and 100) and solid nanoparticle volume fraction (between 0 and 0.04) on the fluid flow and thermal characteristics were numerically analyzed. It was observed that when magnetic field is imposed, more reduction in average Nusselt number for water is obtained as compared to nanofluid which is 31.81% for the nanofluid at the highest particle volume fraction. The average heat transfer augments with magnetic inclination angle, but it is less than 5%. When the height of the PCM is increased which is from 0.2H to 0.8H, local and average Nusselt number reduced which is 42.14%. However, the length of the PCM is not significant on the heat transfer enhancement. When the conductivity ratio of the PCM to the base fluid within the cavity is increased from 0.1 to 10, 29.5% of the average Nusselt number enhancement is achieved. [ABSTRACT FROM AUTHOR]

In this study, mixed convection and entropy generation in a nanofluid filled triangular cavity under the influence of rotating cylinder and flexible sidewall were numerically analyzed with finite element method. The inclined sidewall was cooled while the left vertical wall is partially heated. Heat transfer rate enhances as the values of Rayleigh number, angular rotational velocity of the cylinder, elastic modulus of the flexible sidewall and solid nanoparticles volume fraction increase. Nusselt number enhances more in the counter-clockwise direction of the cylinder as compared to clockwise directional rotation and 13.55% of average heat transfer enhancement was achieved for Ω=3000 when compared to motionless cylinder. Average Nusselt number increases by about 30.50% when the elastic modulus of the flexible wall is changed from 500 to 105. The changes in the velocity profiles are significant for the lower part of the triangular enclosure with respect to changes in angular rotational velocity and elastic modulus as compared to upper part of the cavity. Adding nanoparticles increases heat transfer especially for the lower part of the cavity and 49.63% of heat transfer enhancement was achieved for the highest volume fraction when compared to base fluid. Normalized total entropy generation rates enhance for higher values of elastic modulus of the flexible wall, angular rotational speed of the circular cylinder and nanoparticle volume fractions. [ABSTRACT FROM AUTHOR]

Numerical simulation of mixed convection heat transfer in a lid-driven triangular cavity filled with power law nanofluid and with an opening was performed under the effect of an inclined magnetic field. The left vertical wall of the cavity moves in + y-direction, and the bottom wall of the cavity is partially heated. Galerkin weighted residual finite element method was used to solve the governing equations. Influence of Richardson number, Hartmann number, inclination angle, opening ratio and nanoparticle volume fraction on the fluid flow and heat transfer is examined for various power law indices. It was observed that average heat transfer deteriorates as the value of Richardson number and Hartmann number enhances. At the lowest value of Richardson number, the discrepancy between the average heat transfer corresponding to different power law indices is higher. The inclination angle of the magnetic field where the minimum of the average Nusselt number is seen depends on the fluid type. Average heat transfer number is the highest for the highest value of the opening ratio. The average Nusselt number enhances with solid particle volume fraction, and there are slight variations in the reduction in the average Nusselt number when base fluid and nanofluid are considered for various power law indices. [ABSTRACT FROM AUTHOR]

In this study, fluid flow and heat transfer in a vertical lid-driven CuO-water nanofluid filled square cavity with a flexible fin attached to its upper wall under the influence of an inclined magnetic field are numerically investigated. The left vertical wall of the cavity is colder than right vertical wall, and it moves in + y direction with constant speed. Horizontal walls of the cavity are insulated. The governing equations are solved with finite element method. The arbitrary Lagrangian-Eulerian method is used to describe the fluid motion within the cavity for the flexible fin in the fluid-structure interaction model. The influence of Richardson number (between 0.01 and 100), Hartmann number (between 0 and 50), inclination angle of the magnetic field (between 0 and 90%), nanoparticle volume fraction (between 0 and 0.05) and Young's modulus of flexible fin (between 250 and 5000) on the flow and heat transfer were numerically studied. It is observed that the presence of the elastic fin affects the flow field and thermal characteristics of the cavity. The local and average heat transfer enhance as the Richardson number, solid volume fraction of the nanoparticle increase whereas deteriorate as the value of the Hartmann number and inclination angle of the magnetic field increases due to the dampening of the fluid motion with Lorentz forces. The addition of the nanoparticles is more effective along the lower part of the right vertical wall where the heat transfer process is effective. The average heat transfer increases by 28.96% for solid volume fraction of 0.05% compared to base fluid when the flexible fin is attached to the upper wall. The average heat transfer deteriorates by 10.10% for cavity with and without fin at Hartmann number of 50 compared to the case without magnetic field. The average heat transfer enhances as the Young's modulus of the flexible fin decreases and the average Nusselt number increases by 13.24% for Young's modulus of 250 compared to configuration for the cavity having the Young's modulus of 5000. [ABSTRACT FROM AUTHOR]