Search

A miniaturized sample preparation technique that uses a fine-fiber-packed needle as the extraction medium is reviewed, especially in relation to its application to the analysis of volatile organic compounds by gas chromatography. When the needle was packed longitudinally with a bundle of fine filaments (12 µm o.d.) which were also surface-coated with polymeric materials, successful sample preconcentration was obtained. Improved sensitivity was also established by introducing simultaneous derivatization reactions into the extraction process in the fiber-packed needle. The storage performance of the needle clearly demonstrated the potential of the technique for typical on-site sampling during environmental analysis. In this short review, the fiber-packed extraction needle developed by the authors is summarized along with applications that use the fiber-packed needle as a miniaturized extraction device. [ABSTRACT FROM AUTHOR]

A fiber-packed needle was developed as a novel extraction device for gas-chromatographic analysis of trace organic compounds in aqueous samples. In the extraction device, a bundle of the polymer-coated filaments as the sorbent material was longitudinally packed into a specially designed needle. The extraction was made by pumping the aqueous sample solution into the needle extraction device, and the subsequent desorption process was carried out with a flow of desorption solvent through the needle in a heated gas chromatograph injector. The needle device showed an excellent thermal stability for repeated use without any deterioration of extraction performance, and no carryover effect was observed after the optimization of the desorption conditions. Additionally, the extraction efficiency of the fiber-packed needle could be enhanced by optimizing the number of packed filaments. The selectivity for various compounds could be also tuned using an appropriate combination of the fibrous medium and the coating polymer. The relative standard deviation for run to run was from 3.88 to 4.55% ( n = 5), and that for needle to needle was 7.21% ( n = 3), clearly suggesting a good repeatability of the needle extraction technique developed. Upon successful optimization of the extraction conditions, a rapid extraction of trace organic compounds from an aqueous sample matrix was successfully demonstrated, where each extraction process was completed within 10 min. [ABSTRACT FROM AUTHOR]

A novel in-needle sample preparation device has been developed for the determination of volatile aldehydes in gaseous samples. The needle device is designed for the gas chromatographic (GC) analysis of aldehydes and ketones commonly found in typical in-house environments. In order to prepare the extraction device, a bundle of polymer-coated filaments was longitudinally packed into a specially designed needle. Derivatization reactions were prompted by 2,4-dinitrophenylhydrazine (NDPH) included in the needle, and so the aldehydes and ketones were derivatized to the corresponding hydrazones and extracted with the extraction needle. A reproducible extraction needle preparation process was established, along with a repeatable derivatization/extraction process that ensures the successful determination of aldehydes. The storage performance of the extraction needle was also evaluated at room temperature for three days. The results demonstrate the successful application of the fiber-packed extraction device to the preparation of a gaseous sample of aldehydes, and the future possibility of applying the extraction device to the analysis of in-house environments. [ABSTRACT FROM AUTHOR]