Search

In the present paper, an active landslide located to the southeast of the urban area of Alcoy (Alicante, Spain) is analysed. This landslide affects the N-340 road, as well as an area in which some industrial buildings dated from the fifteenth century and catalogued as Places of Cultural Interest are placed. This region is characterised by the existence of a steep relief composed of materials from the Miocene to the present, on which many gravitational movements are developed. The displacements have been analysed using high-resolution spotlight mode SAR images captured by the Spanish SAR satellite PAZ (which operates at X-band), which were processed by advanced differential SAR Interferometry (A-DInSAR). The behaviour of the instability has been determined using InSAR-derived time series displacement maps. Additionally, the study has been completed with a detailed geomorphological mapping at 1:2000 scale and an analysis of structural damage carried out in situ. The landslide was modelled in 3D, from a deterministic and probabilistic point of view, confirming the global instability of the area and the relationship of the landslide with rainfall and the construction of a new road. The integration of all this information obtained and its subsequent analysis has made possible to precisely define the extension of the instability, its kinematics, and to identify the main triggering factors. This information will be crucial for the proper management of this landslide by the local authorities. [ABSTRACT FROM AUTHOR]

Landslides which occur at unexpected locations and times, and which have unrecognizable risk areas, often cause mass casualties. Despite there being few preceding landslides in the same season, the catastrophic Qijiaba landslide occurred in the new government-selected settlement of Wufu village, Sichuan Province, China, on September 5, 2021, killing three people and destroying 13 houses. In this paper, the landslide features and causes are discussed based on field investigations, remote sensing interpretations, and laboratory-based soil experiments. The results showed that it was a typical soil landslide within a geomorphic hollow of the slope with a volume of 20,230 m3, recurrence interval of at least 69 years, and runout distance of 137.5 m. This type of landslide is difficult to predict. The soil strength in the sliding surface decreased suddenly as the water content increased, and the soil's rich clay mineral and high clay particle contents determined its high mobility (Heim's ratio of 0.44). The occurrence time of the Qijiaba landslide lagged 1.3 days behind the peak rainfall, and the 2-day cumulative rainfall was a crucial factor in the landslide occurrence. Finally, the large water confluence area behind the main scarp was determined to be 3.9 times the area of the landslide itself, thereby providing abundant water conditions to induce failure. The factors underlying the casualties included inappropriate site selection, insufficient awareness of potential landslides, and failure to evacuate in time. The results of this study provide a basis for future prevention, mitigation, and early warning of similar landslides. [ABSTRACT FROM AUTHOR]

When an active landslide is first identified in an artificial reservoir, a comprehensive study has to be quickly conducted to analyse the possible hazard that it may represent to such a critical infrastructure. This paper presents the case of the El Arrecife Landslide, located in a slope of the Rules Reservoir (Southern Spain), as an example of geological and motion data integration for elaborating a preliminary hazard assessment. For this purpose, a field survey was carried out to define the kinematics of the landslide: translational in favour of a specific foliation set, and rotational at the foot of the landslide. A possible failure surface has been proposed, as well as an estimation of the volume of the landslide: 14.7 million m3. At the same time, remote sensing and geophysical techniques were applied to obtain historical displacement rates. A mean subsidence rate of the landslide around 2 cm/year was obtained by means of synthetic aperture radar interferometry (InSAR) and ground-penetrating radar (GPR) data, during the last 5 and 22 years, respectively. The structure-from-motion (SfM) technique provided a rate up to 26 cm/year during the last 14 years of a slag heap located within the foot of the landslide, due to compaction of the anthropical deposits. All of this collected information will be valuable to optimise the planning of future monitoring surveys (i.e. differential global positioning systems, inclinometers, ground drilling, and InSAR) that should be applied in order to prevent further damage on the reservoir and related infrastructures. [ABSTRACT FROM AUTHOR]

Multi-platform remote sensing using space-, airborne and ground-based sensors has become essential tools for landslide assessment and disaster-risk prevention. Over the last 30 years, the multiplicity of Earth Observation satellites mission ensures uninterrupted optical and radar imagery archives. With the popularization of Unmanned Aerial Vehicles, free optical and radar imagery with high revisiting time, ground and aerial possibilities to perform high-resolution 3D point clouds and derived digital elevation models, it can make it difficult to choose the appropriate method for risk assessment. The aim of this paper is to review the mainstream remote-sensing methods commonly employed for landslide assessment, as well as processing. The purpose is to understand how remote-sensing techniques can be useful for landslide hazard detection and monitoring taking into consideration several constraints such as field location or costs of surveys. First we focus on the suitability of terrestrial, aerial and spaceborne systems that have been widely used for landslide assessment to underline their benefits and drawbacks for data acquisition, processing and interpretation. Several examples of application are presented such as Interferometry Synthetic Aperture Radar (InSAR), lasergrammetry, Terrestrial Optical Photogrammetry. Some of these techniques are unsuitable for slow moving landslides, others limited to large areas and others to local investigations. It can be complicated to select the most appropriate system. Today, the key for understanding landslides is the complementarity of methods and the automation of the data processing. All the mentioned approaches can be coupled (from field monitoring to satellite images analysis) to improve risk management, and the real challenge is to improve automatic solution for landslide recognition and monitoring for the implementation of near real-time emergency systems. [ABSTRACT FROM AUTHOR]

The main objectives of this paper are to design and evaluate a hybrid approach based on Gaussian mixture model (GMM) and random forest (RF) for detecting rockfall source areas using airborne laser scanning data. The former model was used to calculate automatically slope angle thresholds for different type of landslides such as shallow, translational, rotational, rotational-translational, complex, debris flow, and rockfalls. After calculating the slope angle thresholds, a homogenous morphometric land use area (HMLA) was constructed to improve the performance of the model computations and reduce the sensitivity of the model to the variations in different conditioning factors. After that, the support vector machine (SVM) was applied in addition to backward elimination (BE) to select and rank the conditioning factors considering the type of landslides. Then, different machine learning methods [artificial neural network (ANN), logistic regression (LR), and random forest (RF) were trained with the selected best factors and previously prepared inventory datasets. The best fit method (RF) was then used to generate the probability maps and then the source areas were detected by combining the slope raster (reclassified according to the thresholds found by the GMM model) and the probability maps. The accuracy assessment shows that the proposed hybrid model could detect the potential rockfalls with an accuracy of 0.92 based on training data and 0.96 on validation data. Overall, the proposed model is an efficient model for identifying rockfall source areas in the presence of other types of landslides with an accepted generalization performance. [ABSTRACT FROM AUTHOR]

The recent assessment of the Mitchell Creek Landslide (MCL) in northern British Columbia is a good case history of engineering geomorphological analysis of a large landslide. It was completed using historic aerial photographs, with approximately 20-year time intervals dating back to the mid-twentieth century and field investigations completed between 2008 and 2014. The large bedrock slide initiated between 1956 and 1972 and continues to experience ongoing annual movements. Significant glacial downwasting and retreat has been observed in the photographic record, and it is hypothesized that alpine glaciation has contributed to development of the MCL. This paper documents four aspects of the engineering geomorphological assessment completed at the MCL: (i) topographic evolution, (ii) slope morphology, (iii) deformation features, and (iv) displacement behavior. Four distinct geomorphic zones have been defined at the MCL based on these analyses, controlled by different failure mechanisms. The extents of these zones have changed little over the documented history of the landslide, and rates of movement estimated from aerial photography have been consistent over the last 60 years. Retreat of the Mitchell Valley Glacier appears to have played an important role in landslide initiation, as the ice mass receded the kinematic freedom of the slope increased. This study of the initiation and development of the MCL demonstrates the capabilities of a multi-faceted approach to engineering geomorphology. The combination of historical aerial photographs with digital photogrammetric modeling and point cloud analysis techniques, and geomorphological mapping, allows for development of a robust understanding of landslide behavior. [ABSTRACT FROM AUTHOR]

This paper presents rainfall-induced landslide thresholds and predicts landslide hazard in Kuala Lumpur metropolitan city and surrounding areas. Landslide events from 2000 to 2012 were collected. The long and short antecedent rainfall days were prepared for landslide and non-landslide days simultaneously. First, threshold analysis was conducted by using data obtained from rainfall stations located in highly urbanized areas of Kuala Lumpur metropolis. Six rainfall gauges were selected, and the study area was divided into six zones according to rainfall gauges: Taman Desa Station (TD-KL), Genting Klang (GK-KL), LDG Edinburgh Station (LDGE-KL), SG Raya Hulu Langat Station (SRHL-Slg), Puchong Drop Station (PD-Slg), and Bukit Antarabangsa (BTA-Slg). After the threshold analysis was conducted for different periods (10, 15, and 30 days) in each station, reliability index test was conducted to optimize the best threshold that limits the predicted events along the study period for each region. Second, the threshold analysis results were used as input in the Poisson probability model to estimate landslide temporal probability ( P). Third, the spatial probability ( P) analysis was prepared by using the evidential belief function multiplied by the P to obtain the hazard maps for 1-, 3-, and 5-year scenarios. Finally, a validation process was conducted to test the prediction performance of the resultant hazard map for a 1- and 2-year prediction by using the landslide inventory of 2012 to early 2014, which was not included in the modeling of the hazard map. Results showed a valid correlation between the high and moderate hazardous areas for the six zones. The predicted hazard maps indicated a quantitative assessment of the prone areas and proved to be a valid disaster management tool. The produced hazard maps may play a vital role as input component in risk analysis. [ABSTRACT FROM AUTHOR]

This paper presents an evaluation of two bivariate statistical approaches, frequency ratio (FR) and weights-of-evidence (WoE) for landslide susceptibility mapping (LSM) at south-western part of Saudi Arabia, Jizan region. Landslide locations were identified and mapped from interpretation of high resolution satellite images (GeoEye 0.5 m and QuikeBird 0.6m), topographic maps (scale of 1:10,000), historical records, and extensive field surveys. A total of 106 landslide locations were mapped using Arc-GIS software and divided into two groups, 75% and 25% of landslide locations were used for training and validation of models, respectively. Eleven landslide conditioning factors such as elevation, slope, curvature, aspect, lithology, topographic wetness index (TWI), normalized difference vegetation index (NDVI), proximity to lineament, roads and rivers were considered in this evaluation. The effects of these factors on landslide occurrence were assessed using aforementioned bivariate statistical approaches. For validation, the models results were compared with landslide locations which were not used during the models building. Subsequently, the receiver operating characteristic (ROC) curves were established and area under the curves (AUC) was calculated for the landslide susceptibility maps using the success (training data) and prediction (validation data) rates. The results showed that the area under the curve for success rates are 0.861 (86.1%) and 0.839 (83.9%) and for prediction rates are 0.796 (79.6%) and 0.791 (79.1%), respectively for frequency ratio and weight-of-evidence models. The resulting landslide susceptibility maps showed five classes of susceptibility such as very high, high, moderate, low, and very low. The percentage of existing training and validating landslides data in high and very high zones of the susceptibility maps were calculated to be 90.02% and 76.03% for frequency ratio model and 88.33% and 79.3% for weight-of-evidence model, respectively. The results revealed that the frequency ratio and weights-of-evidence models produced reasonable accuracy. The resultant maps would be useful and can also help planners for general choosing favorable locations for development schemes, such as infrastructural, buildings, road constructions, and environmental protection. [ABSTRACT FROM AUTHOR]

Landslide is one of the most widely distributed mass movements in mountainous areas. With its wide spreading, abrupt, and seasonal characteristics, landslide always causes huge risks towards transportation, human settlements, industrial and mining plants, water resources facilities, and hydropower stations. Abe Barek landslide, which happened in the morning of May 2, 2014, in Ago District, Badakhshan Province, Afghanistan, buried 86 houses and took the lives of almost 2700 people. Many factors triggered the occurrence of this disaster. Firstly, the landslide-impacted area has a complex geologic structure that bears concentrated faults with mountain slopes covered by thick loess. Secondly, at the time of landslide, a continuous rainfall had deepened the level of moisture in the loess layer, which made the loess mass heavier and changed the soil body's mechanical properties. Thirdly, a similar landslide once happened on the same slope, which destroyed the land cover and transformed the topology of the slope. In addition, farming and irrigating activities may have also affected the stability of loess mass in this area. Upon an initial examination of landslide distribution in Badakhshan Province by using high-resolution remote sensing images from Google Earth, a total number of 609 landslide sites were identified in this area, and a landslide susceptibility assessment was completed by utilizing weight-of-evidence method. Several suggestions on landslide risk reduction in this remote mountainous area are proposed at the end of this paper. [ABSTRACT FROM AUTHOR]

Mountain areas in the southern western corner of the Kingdom of Saudi Arabia frequently suffer from various types of landslides due to rain storms and anthropogenic activities. To resolve the problem related to landslides, landslide susceptibility map is important as a quick and safe mitigation measure and to help making strategic planning by identifying the most vulnerable areas. This paper summarizes findings of landslide susceptibility analysis at Al-Hasher area, Jizan, KSA, using two statistical models: frequency ratio and index of entropy models with the aid of GIS tools and remote sensing data. The landslide locations (inventory map) were identified in the study area using historical records, interpretation of high-resolution satellite images that include Geo-Eye in 2.5 m and Quickbird in 0.6m resolution, topographic maps of 1:10,000 scale, and multiple field investigations. A total of 207 landslides (80% out of 257 detected landslides) were randomly selected for model training, and the remaining 50 landslides (19%) were used for the model validation. Ten landslide conditioning factors including slope angle, slope-aspect, altitude, curvature, lithology, distance to lineaments, normalized difference vegetation index (NDVI), distance to roads, precipitation, and distance to streams, were extracted from spatial database. Using these conditioning factors and landslide locations, landslide susceptibility and weights of each factor were analyzed by using frequency ratio and index of entropy models. Our findings showed that the existing landslides of high and very high susceptibility classes cover nearly 80.4% and 79.1% of the susceptibility maps produced by frequency ratio and index of entropy models respectively. For verification, receiver operating characteristic (ROC) curves were drawn and the areas under the curve (AUC) were calculated for success and prediction rates. For success rate the results revealed that for the index of entropy model (AUC = 77.9%) is slightly lower than frequency ratio model (AUC = 78.8%). For the prediction rate, it was found that the index of entropy model (AUC = 74.9%) is slightly lower than the frequency ratio model (AUC = 76.7%). The landslide susceptibility maps produced from this study could help decision makers, planners, engineers, and urban areas developers to make suitable decisions. [ABSTRACT FROM AUTHOR]

An ensemble algorithm of data mining decision tree (DT)-based CHi-squared Automatic Interaction Detection (CHAID) is widely used for prediction analysis in variety of applications. CHAID as a multivariate method has an automatic classification capacity to analyze large numbers of landslide conditioning factors. Moreover, it results two or more nodes for each independent variable, where every node contains numbers of presence or absence of landslides (dependent variable). Other DT methods such as Quick, Unbiased, Efficient Statistic Tree (QUEST) and Classification and Regression Trees (CRT) are not able to produce multi branches based tree. Thus, the main objective of this paper is to use CHAID method to perform the best classification fit for each conditioning factors, then, combined it with logistic regression (LR) to find the corresponding coefficients of best fitting function that assess the optimal terminal nodes. In the first step, a landslide inventory map with 296 landslide locations were extracted from various sources over the Pohang-Kyeong Joo catchment (South Korea). Then, the inventory was randomly split into two datasets, 70 % was used for training the models, and the remaining 30 % was used for validation purpose. Thirteen landslide conditioning factors were used for the susceptibility modeling. Then, CHAID was applied and revealed that some conditioning factors such as altitude, soil drain, soil texture and TWI, as terminal nodes and reflected the best classification fit. Then, a proposed ensemble technique was applied and the interpretations of the coefficients showed that the relationship between the decision tree branch nodes distance from drain, soil drain, and TWI, respectively, leads to better consequences assessment of landslides in the current study area. The validation results showed that both success and prediction rates, 75 and 79 %, respectively. This study proved the efficiency and reliability of ensemble DT and LR model in landslide susceptibility mapping. [ABSTRACT FROM AUTHOR]

The paper proposes a methodology for quantitative landslide risk assessment for regional-scale analysis. Each component of risk, i.e., hazard, vulnerability, and consequence analysis, is quantitatively assessed. The developed landslide risk assessment methodology is tested in Kumluca watershed, in Bartın, Turkey. Geographic information systems and remote sensing techniques are used to create landslide factor maps, to obtain susceptibility maps, hazard maps, elements at risk, and risk maps. Susceptibility maps are obtained by using a logistic regression model while adopting a grid-based mapping unit. In addition to spatial probability of occurrence of damaging events, landslide hazard calculation requires the determination of the temporal probability. Precipitation triggers the majority of landslides in the study region. The critical rainfall thresholds were estimated by using antecedent rainfalls and landslide occurrence dates based on Gumble Distribution approach. The elements at risk are extracted from existing digital cadastral databases and the vulnerabilities are obtained by adopting some generalization approaches. To conclude, quantitative risk maps were produced on a continuous scale where numerical values indicate the distribution of risk including the annual probability of expected losses in TL per pixel and the annual probability of life loss per pixel for property and life, respectively. For the considered case study, it is found that the annual probability of property loss is the highest for the provincial highway and the provincial road. The property loss map highlights that the annual expected loss to power network is medium. The annual probability of life loss map illustrates that the region surrounded by Kumluca town, Kızıllar, and Zafer villages have medium and high annual expected loss of population values, respectively. [ABSTRACT FROM AUTHOR]

This paper deals with landslide hazards and risk analysis of Penang Island, Malaysia using Geographic Information System (GIS) and remote sensing data. Landslide locations in the study area were identified from interpretations of aerial photographs and field surveys. Topographical/ geological data and satellite images were collected and processed using GIS and image processing tools. There are ten landslide inducing parameters which are considered for landslide hazard analysis. These parameters are topographic slope, aspect, curvature and distance from drainage, all derived from the topographic database; geology and distance from lineament, derived from the geologic database; landuse from Landsat satellite images; soil from the soil database; precipitation amount, derived from the rainfall database; and the vegetation index value from SPOT satellite images. Landslide susceptibility was analyzed using landslide-occurrence factors employing the probability-frequency ratio model. The results of the analysis were verified using the landslide location data and compared with the probabilistic model. The accuracy observed was 80.03%. The qualitative landslide hazard analysis was carried out using the frequency ratio model through the map overlay analysis in GIS environment. The accuracy of hazard map was 86.41%. Further, risk analysis was done by studying the landslide hazard map and damageable objects at risk. This information could be used to estimate the risk to population, property and existing infrastructure like transportation network. [ABSTRACT FROM AUTHOR]