Search

This paper describes the integration of a photovoltaic (PV) renewable energy source with a superconducting magnetic energy storage (SMES) system. The integrated system can improve the voltage stability of the utility grid and achieve power leveling. The control schemes employ model predictive control (MPC), which has gained significant attention in recent years because of its advantages such as fast response and simple implementation. The PV system provides maximum power at various irradiation levels using the incremental conductance technique (INC). The interfaced grid side converter of the SMES can control the grid voltage by regulating its injected reactive power to the grid, while the charge and discharge operation of the SMES coil can be managed by the system operator to inject/absorb active power to/from the grid to achieve the power leveling strategy. Simulation results based on MATLAB/Simulink® software prove the fast response of the system control objectives in tracking the setpoints at different loading scenarios and PV irradiance levels, while the SMES injects/absorbs active and reactive power to/from the grid during various events to improve the voltage response and achieve power leveling strategy. [ABSTRACT FROM AUTHOR]

Recently, hybrid generation systems (HGSs) are considered to be the optimal solution for supplying remote areas with the required electrical power. HGSs contain two or more renewable energy sources (RESs), such as wind power generators (WPGs), photovoltaic (PV) generation systems and the energy of the tides. Due to the intermittent nature of RESs, power and voltage fluctuations have appeared accordingly at the connection point with the utility power grid. Hence, energy storage technologies can play an effective role in mitigating power and voltage fluctuations caused by hybrid PV–wind generation systems. This paper proposes a robust control strategy for superconducting magnetic energy storage (SMES) combined with HGS. Fuzzy logic control (FLC) is used to control the chopper circuit of SMES in order to charge/discharge the active power from/to HGS. The proposed FLC strategy considers the fluctuations due to PV and wind power generation systems and the random load power variation. SMES with the proposed FLC method can effectively mitigate the fluctuation of active and reactive powers transfer between HGS and grid, and it can also regulate the voltage profile of the common connection point of SMES with HGS. Moreover, the system line power loss is clearly reduced by using the SMES system. The complete power system including loads is built in MATLAB/Simulink platform. The simulation results indicate that the proposed FLC–SMES can smooth both power and voltage fluctuations due to uncertain climate changes of PV and WPG systems. [ABSTRACT FROM AUTHOR]

The intermittent behavior of wind power generation results in a fast variation of both frequency and voltage magnitudes of isolated microgrids with high wind power penetration. In this paper, a hybrid energy microgrid with wind energy conversion system (WECS) and diesel synchronous generators are analyzed during wind gust conditions. Superconducting magnetic energy storage (SMES) is connected at the same node of the WECS to mitigate the intermittent wind power generation. A developed fuzzy logic controller has been applied to achieve active power sharing. The damping of voltage fluctuation depends on SMES reactive power, which is controlled by a voltage source converter. The studied microgrid comprises 33 nodes, two diesel SGs, and two WECSs of squirrel cage induction generator type at 30% penetration level. The results demonstrate the effectiveness of the proposed control strategy to mitigate the frequency fluctuations during the wind speed gusts by smoothing power output from WECSs/SMES system. Moreover, voltage control is achieved by injecting reactive power from the SMES system. All simulations are performed by MATLAB/Simulink package. [ABSTRACT FROM AUTHOR]