Search

In this study, different methods for incorporating mixed or laminar copper microparticles (CuMPs) during papermaking were evaluated to determine the optimum paper-making process and correlate particle concentration and shape with antimicrobial activity. The addition of CuMPs during the disintegration of dry pulp stage was observed to produce a paper with uniformly distributed CuMPs, as determined through optical microscopy and UV–Vis spectroscopy analyses by measuring absorbance spectra in different areas of papers. Determination of two indices related to the concentration and distribution of copper will allow to predict the copper content in other papers. CuMP-paper samples were evaluated for structural, optical, and mechanical strength properties according to paper industry standards. Quantitative analyses by atomic absorption showed that between 24 and 39% of CuMPs were embedded in the paper fibre, independent of particle type. Finally, antibacterial activity analyses were performed according to ISO 20645 and ISO 20743. The results showed that papers with 0.30 g of incorporated CuMPs have antimicrobial activity, independent of particle morphology, with effects observed towards Gram (+) and Gram (−) bacteria and fungus. Furthermore, the evaluation of antimicrobial activity at different times of exposure to the microorganisms showed differences in effects that were dependent on the shape of the CuMPs incorporated into paper, where laminar particles exerted a sufficient effect, while no or a slight effect was observed for mixed CuMPs against Aspergillus niger. [ABSTRACT FROM AUTHOR]

Bacterial nanocellulose (BNC) is a unique natural nanomaterial that shares very few similarities with other natural or industrially produced nanomaterials. BNC can be produced by a variety of bacteria, as a survival aid in different ecological niches. BNC is traditionally produced by static or shaking culture methods, and the 'mother vinegar', or biofilm, is a typical example of this product after static vinegar fermentation. BNC has great potential in biomedicine, and recent studies have also demonstrated its use in the papermaking industry. It has nanoscale fiber size and large numbers of free hydroxyl groups, which ensure high inter-fiber hydrogen bonding. Thus, BNC has great potential as a reinforcing material, and is especially applicable for recycled paper and for paper made of nonwoody cellulose fiber. As well as enhancing the strength and durability of paper, modified BNC shows great potential for production of fire resistant and specialized papers. However, the biotechnological aspects of BNC need to be improved to minimize the cost of its production, and to thus make this process economically feasible. [ABSTRACT FROM AUTHOR]

Generated in the pulp and paper production process, cellulosic pulp fines are fibrous cellulosic materials capable of passing a 200 mesh screen. Processed pulp fines remain in the pulp and affect pulp and paper sheet properties. Their specific morphology promotes interactions with fibers and alters sheet properties. Nevertheless, the 3D distribution of fines in paper sheets has not been revealed so far. Localizing fines within a matrix of fibers is challenging since both elements have the same chemical composition and fines have small dimensions. It is required to increase the contrast of pulp fines, while avoiding any alteration of initial fines morphology. In this study, fines were first separated and labeled with Rhodamine B isothiocyanate, a fluorescent dye. Labeled fines were blended with pulp at different concentrations and paper sheets were produced from each mixture. Prior to imaging, pulps and handsheets were characterized by standard pulp and paper tests and compared with references, showing no significant differences between sheets containing labeled and untreated fines. Thus, mechanical and physical tests indicated that no, or only minor alteration of fines properties by the labeling process occurred. We then applied two imaging techniques to detect the labeled pulp fines in the paper network, namely confocal laser scanning microscopy and multiphoton microscopy, visualizing the 3D distribution of fluorescent fines within the fiber network. The results obtained also allowed a differentiation between morphologically different fines showing fiber fragments more attached to single fibers whereas more fibrillar fines concentrate in fiber–fiber joints, thereby strengthening bonding. [ABSTRACT FROM AUTHOR]

Information is provided on the properties of technical-purpose papers based on heat-resistant superhigh modulus (SHM) para-aramid fibres containing heterocyclic rings. Various methods of producing such papers are reviewed. The properties of samples of the heat-resistant papers are listed. The results of study and comparison of chemical resistance of the obtained papers are adduced. [ABSTRACT FROM AUTHOR]

The present work studies the feasibility of wheat soda pulp as a raw material for the fabrication of cellulose nanofibres and their application as an additive in papermaking. Wheat straws were cooked under alkaline conditions and the resulting pulp was used as a raw material for the production of lignocellulosic nanofibres (LCNF). Nanofibres were fabricated by intense mechanical beating followed by high-pressure homogenization. The produced LCNF were characterized and applied to papermaking slurry based also on wheat straw soda pulp. Paper sheets made thereof were analysed for their physical and mechanical properties. The results indicated that paper strength was improved after addition of LCNF, whereas density increased and porosity was reduced. These improvements in properties (except the Tear Index) are significant because they were achieved using LCNF with lower fibrillation degree compared to previous works where chemically pre-treated LCNF were used as reinforcement. [ABSTRACT FROM AUTHOR]

Composites of cellulose fibers were made with paper-making technology. Two types of microfibrillated cellulose (MFC), obtained by with either homogenization or ball milling, were blended with hardwood fibers to give composites having high strength and low air permeability. The strengthening effects of the MFCs were compared with strengthening by cellulose microparticles (CMPs) made by cryogenic milling, with and without polyamideamine-epichlorohydrin addition. The MFC from homogenization was fully retained on the fiber web due to a broad size distribution; in contrast, the retention ratio for MFC produced by ball milling was lower than 50 % because of its smaller particle size. The small size caused the resulting paper to display a more compact and denser structure. The main distinction between the papers made with the two types of MFC was the elongation at break under wet conditions, suggesting that they reinforce the paper in different ways. On the other hand, CMPs act as mechanical debonders and could find application in tissue paper, increasing paper bulk and decreasing the density and thus improve tissue softness. [ABSTRACT FROM AUTHOR]

High strength and low gas permeability cellulosic composites were produced using the papermaking technology with a commercial microfibrillated cellulose (MFC). The effect of blending MFC with hardwood fibers was compared to the direct refining of the fibers with and without polyamideamine-epichlorohydrin (PAE) addition. The addition of MFC, free or tethered, to pulp fibers combined with PAE can increase the dry strength and wet strength of cellulosic materials by an order of magnitude. Air permeability of the composites decreases by up to orders four of magnitude with MFC addition. The hypothesis that refining wood fibers can produce tethered MFC which provides equivalent strength properties but significant drainage benefits was proven. Furthermore, major benefits in paper formation uniformity (fiber distribution homogeneity) were achieved with refined fibers. [ABSTRACT FROM AUTHOR]

Different types of microfibrillated cellulose (MFC) and fines suspensions were produced, characterized, and then added to a papermaking pulp suspension. High and medium molar mass cationic polyelectrolytes were used as fixatives. The drainage behavior of the pulp suspensions with additives were evaluated against the strength properties of hand sheets made thereof. The effects of salt concentration, pH, fixative type, dosage and type of fibrillar material on drainage were examined. All the MFC and fines samples produced had clearly different properties due to their dissimilar production methods, and they also introduced specific responses on the measured drainage and paper strength. Generally, the addition of MFC decreased the drainage rate of pulp suspension and increased the strength of paper. However, it was shown that by optimum selection of materials and process conditions an enhancement of the strength properties could be achieved without simultaneously deteriorating the drainage. [ABSTRACT FROM AUTHOR]

CdSe/ZnS quantum dots (QDs) were embedded in films of cellulose triacetate (CTA) to give clear films with the broad absorbance and well-defined, size-tunable fluorescence characteristic of QDs. The relative quantum yields of the QDs in polymer were compared to that of the initial QDs dispersed in toluene. Alkaline hydrolysis of the film surfaces to regenerated cellulose rendered the previously hydrophobic CTA film surfaces hydrophilic and compatible with aqueous papermaking. Films containing combinations of different sized QDs gave more complex emission patterns. Small pieces of fluorescent films were added to pulp slurries and incorporated into laboratory paper sheets through hydrogen bonding between the regenerated cellulose film surfaces and cellulosic pulp fibers. The film system (cellulose ester bulk/cellulose surface) can be used to incorporate hydrophobic particles or molecules compatible with solutions of cellulosic polymers into paper products at both high and low loadings. QDs in paper may prove useful for security applications, such as sheets with unique optical signatures. [ABSTRACT FROM AUTHOR]

Abstract  Variation in wood anatomy and biometric variables was studied in 14 7-year-old Eucalyptus globulus clones grown in a clonal trial in Arauco, Bio-Bio Region, Chile. Biometric characteristics were measured for each tree and the anatomical variables were measured at three radial positions by image analysis on transverse microsections cut from radial increment cores sampled at breast height. Results showed, that among clones wide ranges of variation were found for vessel frequency, vessel area and vessel coverage. However, narrow ranges of variation were found for fiber wall thickness, fiber diameter and lumen diameter. From pith to bark, mean vessel area and vessel coverage increased gradually, whereas the vessel frequency decreased. The fiber wall thickness did not differ significantly from pith to bark. Mean fiber and lumen diameters showed the same radial pattern, increasing from pith to the midpoint of the radius to reach a plateau close to the bark. Furthermore, important commercial volume gains that can exceed 100% were found. Considering the commercial importance of tree volume, vessel and fiber anatomy in the pulping and papermaking process, it is suggested that the information given in this study may be used as an additional criteria for the selection of E. globulus. [ABSTRACT FROM AUTHOR]

The present paper studies the effect of chitosan, cationic starch and polyvinyl alcohol (PVA) as sizing agents to enhance surface properties of kenaf paper. The polymers were incorporated into the sheets by spray application. The results clearly showed that the addition of chitosan to a sheet formed from beaten fibers had excellent improvement in surface properties, compared to the effect of other additives. Sizing quality of cationic starch fairly matched with the sizing quality of chitosan, however, it was able to reduce the water absorption potential of paper more than chitosan at a same concentration. In most other properties, particularly the most important property for printing papers, surface smoothness, chitosan-sized papers are superior to the paper sized with cationic starch or PVA. [ABSTRACT FROM AUTHOR]

This paper investigates the problem of obtaining the best arrangement for cutting stock patterns in the presence of defective material in the paper, which is a common problem in the industry. This problem is modeled as a multiple subset sum problem and its structure is exploited in order to obtain a practical solution procedure. The solution methodology employs the subset sum problem as a subprocedure. Computational results are reported. [ABSTRACT FROM AUTHOR]