Search

In recent decades, the increasing number and severity of wildfires have become a major concern in many regions of the world. Besides having direct consequences for forests, crops, and settlements, wildfires can have significant effects on the catchment's hydrology, altering their response to rainfall and promoting enhanced runoff and erosion. Increased runoff in burnt areas can result in catastrophic damage and loss of life from destructive debris flows and floods. Although observed in many regions of the world, post-wildfire debris flows/floods seem to prevail in the western USA and southern Europe. In Italy, post-wildfire debris flows/floods have been observed in a number of sectors of the Apennine range, and a total of 113 events occurred between 2001 and 2021 in the Campania region. A recent event occurred on August 24, 2020, in the Fosso delle Pescine catchment, on the southwestern slope of Mt. Omo in the L'Aquila municipality, hit by a severe wildfire at the beginning of the month. The consequences of the event on people and properties indicate the need for an evaluation of debris flow/flood hazard in both pre- and post-wildfire conditions. The analysis of these events may often be complex, requiring time and many input data. In this context, a simplified method of analysis which accounts for event initiation and propagation through a shallow water equation-based approach would represent a new and innovative solution for fast and preliminary debris flow/flood analyses. In this research, a reduced complexity analysis based on probability analysis of rainfall and 2D hydrodynamic modeling was carried out by estimating (i) wildfire extent and severity, (ii) sediment characteristics and availability, (iii) potential runoff induced by rainfall, and (iv) inundation by debris flow/flood. A debris flow/flood hazard model was developed on the basis of multiple return periods (10, 50, 100, and 300 years) for debris flow inundation scenarios derived by non-Newtonian 2D hydrodynamic modeling of debris flow hydrograph and qualitatively validated on the basis of the extent of alluvial fan deposits. Potential drawbacks of the model are related to the possible overestimation of surface runoff, related to the consideration of the whole catchment contributing area, and the limited volumetric sediment budget available at the headwater, which might not sustain a high return period event generation. A debris flow/flood event might originate from rainfall concentrated at the headwater of the catchment. [ABSTRACT FROM AUTHOR]

A key component of disaster management and infrastructure organization is predicting cumulative deformations caused by landslides. One of the critical points in predicting deformation is to consider the spatio-temporal relationships and interdependencies between the features, such as geological, geomorphological, and geospatial factors (predisposing factors). Using algorithms that create temporal and spatial connections is suggested in this study to address this important point. This study proposes a modified graph convolutional network (GCN) that incorporates a long and short-term memory (LSTM) network (GCN-LSTM) and applies it to the Moio della Civitella landslides (southern Italy) for predicting cumulative deformation. In our proposed deep learning algorithms (DLAs), two types of data are considered, the first is geological, geomorphological, and geospatial information, and the second is cumulative deformations obtained by permanent scatterer interferometry (PSI), with the first investigated as features and the second as labels and goals. This approach is divided into two processing strategies where: (a) Firstly, extracting the spatial interdependency between paired data points using the GCN regression model applied to velocity obtained by PSI and data depicting controlling predisposing factors; (b) secondly, the application of the GCN-LSTM model to predict cumulative landslide deformation (labels of DLAs) based on the correlation distance obtained through the first strategy and determination of spatio-temporal dependency. A comparative assessment of model performance illustrates that GCN-LSTM is superior and outperforms four different DLAs, including recurrent neural networks (RNNs), gated recurrent units (GRU), LSTM, and GCN-GRU. The absolute error between the real and predicted deformation is applied for validation, and in 92% of the data points, this error is lower than 4 mm. [ABSTRACT FROM AUTHOR]

Landslides represent a severe geohazard in many countries. The availability of inventories depicting the spatial and temporal distribution of landslides is crucial for assessing landslide susceptibility and risk for territorial planning or investigating landscape evolution. Nevertheless, these inventories are usually affected by limitations due to their nonpublic availability and inhomogeneities in characterization and mapping. Such problems are fully recognizable by the analysis of the multiple landslide inventories of the Campania region, which is one of the Italian regions with the highest exposure to landslide hazard and risk. On this basis, a revised Landslide Inventory of the Campania region (LaICa), resulting from the processing of multiple existing landslide inventories, has been reconstructed. It aims to (i) provide a new geodatabase that is able to overcome issues derived from the coexistence of multiple inventories and (ii) provide a methodological paradigm able to support the reorganization of existing official inventories. The implication of LaICa, with its 83,284 records, will possibly improve the assessment of landslide susceptibility and then reassess the related risk. Measurement(s) landslide Technology Type(s) Data Set [ABSTRACT FROM AUTHOR]

In this paper, we aim to define a procedure of flood hazard assessment applicable to large river basins in which flood events can be induced/sustained by the full basin area or by fractions of the total area as functions of the extent of the triggering precipitation event. The proposed procedure is based on a combined approach accounting for (1) the reconstruction of intensity–duration–frequency curves expressing the magnitude in terms of intensity for multiple return periods; (2) the application of the soil conservation service method for runoff estimation from a selected rainfall scenario considering some characteristics of the basin (i.e. soil type, land use/treatment, surface condition, and antecedent moisture conditions); (3) 2D hydrodynamic modelling conducted by the HEC-RAS model using runoff hydrographs as hydrological input data; (4) the reconstruction of flood hazard maps by overlaying multiple inundation maps depicting flood extent for different return periods. To account for the variability in the extent of the triggering precipitation event and the resulting input hydrograph, multiple contributing areas are considered. The procedure is tested at the archaeological site of Sybaris in southern Italy, which is periodically involved in flood events of variable magnitude. The obtained results highlight that the variable extent of the floodable area is strongly conditioned by the extent of the contributing area and return period, as expected. The archaeological site is always involved in the simulated flooding process, except for the smallest contributing area for which only a 300-year event involves this part of the site. Our findings may be useful for developing and supporting flood risk management plans in the area. The developed procedure might be easily exported and tested in other fluvial contexts in which evaluations of multiple flood hazard scenarios, due to the basin geometry and extent, are needed. [ABSTRACT FROM AUTHOR]

Different forms of hazard can affect structures throughout their existence. The occurrence of a seismic event in areas exposed to different risks or already affected by other phenomena is highly likely, especially in countries characterized by high seismicity and equally high hydrogeological risk, as Italy. Nevertheless, the seismic safety assessment of reinforced concrete (RC) structures is commonly carried out considering the seismic action only, generally applied to an analytical model, neglecting the stress–strain state induced by previous ongoing phenomena. The aim of this work is to highlight the importance of the seismic safety assessment in a multi-hazard analysis, cumulating the action coming from two different hazards: landslide and earthquake. An existing RC building, located in an area affected by an intermittent landslide phenomenon with slow kinematics, that may also be subjected to strong earthquakes, is used as case study. The Differential Synthetic Aperture Radar Interferometry (DInSAR) approach is used to monitor the evolution in time of the landslide. DInSAR deformation data are used to detect surface ground movements applied to building foundations. A non-linear static analysis procedure is implemented for the code-based seismic safety assessment, in two different scenarios. The seismic assessment of the case-study building is implemented in a condition of structure deformed only for gravity loads, and, then, in a state of known landslide-induced deformed configuration. A comparison is proposed between the building seismic safety assessment performed in both cases, with or without the consideration of the landslide-induced displacements, showing the importance of a multi-hazard evaluation. [ABSTRACT FROM AUTHOR]