Search

The regulatory role of zinc in bone formation extends to the activation of proteins associated with bone homeostasis. Furthermore, copper is well known for its antibacterial properties. This dual function underscores the significance of zinc and copper in maintaining a balance of bone structure and function. In light of the aforementioned, zinc sulphide/copper oxide nanocomposites were created in this instance using a straightforward coprecipitation technique. Copper oxide was used as a nanocomposite to improve the structural, morphological, and biological performance of zinc sulphide nanoparticles. The X-ray diffraction pattern confirmed a transformation in the crystal structure from cubic to rhombohedral, along with increase in intensity. Fourier transforms infrared analysis indicated the presence of functional groups. Scanning electron microscopy images demonstrated a morphological shift from non-uniform to distinct spherical nanoparticles, impacting the enhancement of material properties. The pathogenic activity of the zinc sulphide/copper oxide nanocomposites was tested against nine bacterial strains. In antimicrobial testing, zinc sulphide/copper oxide nanocomposites showed promising results, particularly against Klebsiella pneumoniae (zone of inhibition: 14 mm at 100 µg/mL compared to 7 mm by standard) and Escherichia coli (zone of inhibition: 11 mm at 100 µg/mL compared to 10 mm by standard) after 24 h with zone of inhibition matching or exceeding that of the standard (chloramphenicol). Zinc sulphide nanoparticles and zinc sulphide/copper oxide nanocomposites were evaluated for their antifungal activity against fungal stains from Trichophyton rubrum, Aspergillus niger, and Aspergillus flavus. After a 24-h period, it was discovered that zinc sulphide/copper oxide nanocomposites were effective against Aspergillus flavus (zone of inhibition: 19.4 mm at 100 µg/mL compared to 6.3 mm by standard) at all concentrations (25–100 mg/mL), with zones of inhibition identical to or greater than those of the standard (fluconazole). Certainly, based on these results, zinc sulphide/copper oxide nanocomposites could be promising materials for drug delivery. Clinical trial registration: Not applicable. [ABSTRACT FROM AUTHOR]

The present work intended to explore the synergistic effects of incorporating carbon nanotubes infused with magnesium oxide nanofluid and dragon fruit extract as a natural additive in photovoltaic–thermal collector systems on its performance in terms of both electrical and thermal energy yield. The proposed methodology was meticulously developed and implemented to assess the efficiency of a hybrid system integrating nano-phase change material and nanofluid in a photovoltaic–thermal configuration. This novel setup was subjected to a comprehensive comparative analysis against a traditional liquid-cooled photovoltaic–thermal system and a standalone photovoltaic module. The study also encompassed variations in cooling techniques, including water with different flow rates for the photovoltaic–thermal system, and the incorporation of nano-phase change material and nanofluid with varying concentrations and flow rates within the hybrid collector. The outcomes demonstrated that at these respective flow rates, the maximum thermal efficiency of the photovoltaic–thermal collector stood at 66.28% and 74.02%. Likewise, the peak electrical efficiency at the same flow rates was recorded as 20.79% and 21.96%. The outcomes of the investigation highlight the higher thermal conductivity of the nanofluid compared to the base fluid, leading to a slight augmentation in fluid density and viscosity. The results obtained from this investigation were found to be consistent with those documented in existing scientific literature. [ABSTRACT FROM AUTHOR]

In this work, we have fabricated a novel electrochemical biosensor based on TiO2/PS. Heterostructure by sol–gel assisted with spin-casting technique. XRD profile showed the tetragonal phase of TiO2 thin films. SEM images observed the nanoporous-like surface morphology. The film has 78 nm of grain size calculated from AFM analysis. The PL spectrum recorded a strong emission peak at 485 nm, 530 nm, and 545 nm due to blue and green emission. The enhancement of the electrochemical reaction was analysed by cyclic voltammetry (CV). The fabricated electrode has shown the sensitive and stable detection of carbohydrates. The more consistent results showed that TiO2/PS electrode is a promising material for the carbohydrates biosensor. Most importantly, the TiO2/PS electrode achieved a correlation between the coefficient (R2) and sensitivity 0.99 and 26 μA mM−1 cm−2 of glucose. Similarly, 0.98 & 16 μA mM−1 cm−2 for sucrose and 0.96 & 11 μA mM−1 cm−2 for starch. [ABSTRACT FROM AUTHOR]

The objective of this research study is to enhance the performance of a flat plate collector by using various cooling fluids, as an increase in solar panel temperature can decrease its efficiency. The experiment utilized three different fluids: distilled water, zinc sulfide nanofluid, and copper zinc sulfide nanofluid. FTIR analysis revealed a pronounced peak at 1133 cm−1, indicating the presence of Cu2+ ions in ZnS. Three key parameters were systematically examined to optimize the solar panel's energy gradient and temperature variance. The flow rate of the cooling fluid varied from 0.5 to 2.0 L min−1. Notably, the use of copper zinc sulfide nanofluid resulted in improvement in the energy gradient, reaching a peak value of 1112 W m–2. The temperature difference showed a significant increase, peaking at 4.73 °C when using CuZnS nanofluid at a flow rate of 1.5 L min−1. The incorporation of copper particles in the nanofluid notably enhanced the thermal conductivity of the cooling fluid. This improvement significantly boosted the efficacy of heat transfer processes, thereby increasing the overall efficiency of the solar panel system. [ABSTRACT FROM AUTHOR]

The aim of this paper is to observe the Nusselt number and friction factor behavior of the circular tube with conical strip inserts as turbulators in a laminar flow condition, using staggered and non-staggered conical strips with three different twist ratios (Y = 2, 3 and 5). The conical strip is inserted in the forward and backward direction individually compared to the flow of water which is the working fluid. The results indicate that the conical strip inserts increases the Nusselt number when compared to the plain surface tube. It is observed that the strip geometry has a major effect on the thermal performance of the circular tube. On examination of different strips for determining the enhancement of Nusselt number, the staggered conical strip with the twist ratio of Y = 3 has given a better result compared to the other two strips. Finally, correlations have been derived using regression analysis for predicting the Nusselt number and friction factor. [ABSTRACT FROM AUTHOR]