Search

In recent decades, the increasing number and severity of wildfires have become a major concern in many regions of the world. Besides having direct consequences for forests, crops, and settlements, wildfires can have significant effects on the catchment's hydrology, altering their response to rainfall and promoting enhanced runoff and erosion. Increased runoff in burnt areas can result in catastrophic damage and loss of life from destructive debris flows and floods. Although observed in many regions of the world, post-wildfire debris flows/floods seem to prevail in the western USA and southern Europe. In Italy, post-wildfire debris flows/floods have been observed in a number of sectors of the Apennine range, and a total of 113 events occurred between 2001 and 2021 in the Campania region. A recent event occurred on August 24, 2020, in the Fosso delle Pescine catchment, on the southwestern slope of Mt. Omo in the L'Aquila municipality, hit by a severe wildfire at the beginning of the month. The consequences of the event on people and properties indicate the need for an evaluation of debris flow/flood hazard in both pre- and post-wildfire conditions. The analysis of these events may often be complex, requiring time and many input data. In this context, a simplified method of analysis which accounts for event initiation and propagation through a shallow water equation-based approach would represent a new and innovative solution for fast and preliminary debris flow/flood analyses. In this research, a reduced complexity analysis based on probability analysis of rainfall and 2D hydrodynamic modeling was carried out by estimating (i) wildfire extent and severity, (ii) sediment characteristics and availability, (iii) potential runoff induced by rainfall, and (iv) inundation by debris flow/flood. A debris flow/flood hazard model was developed on the basis of multiple return periods (10, 50, 100, and 300 years) for debris flow inundation scenarios derived by non-Newtonian 2D hydrodynamic modeling of debris flow hydrograph and qualitatively validated on the basis of the extent of alluvial fan deposits. Potential drawbacks of the model are related to the possible overestimation of surface runoff, related to the consideration of the whole catchment contributing area, and the limited volumetric sediment budget available at the headwater, which might not sustain a high return period event generation. A debris flow/flood event might originate from rainfall concentrated at the headwater of the catchment. [ABSTRACT FROM AUTHOR]

The “San Michele Arcangelo” historic trail (Aurunci Regional Park, central Italy), located along the southern slope of Mt. Altino, which is highly prone to rockfalls, is hiked every year by thousands of faithful on pilgrimage who are exposed to such kinds of instabilities. To contribute to a better understanding of the condition and evolution of such phenomena, providing a susceptibility scenario able to support the adoption of mitigation measures, a specific analysis was completed based on field and literature data. Three-dimensional virtual outcrop models were obtained through both photogrammetric and iPad Pro LiDAR surveys to derive geomechanical features of outcropping rocks and estimate potential detaching block volume. Possible mechanisms of detachment were then analyzed using the Markland test method. Susceptibility to rockfall propagation and block deposition was analyzed using GIS processing and rockfall propagation simulations based on deterministic/stochastic models. Such models consist of a combination of a deterministic algorithm able to simulate the physics of rockfall movement during propagation and a stochastic treatment of input parameters based on random sampling within defined interval. Two different rockfall simulations were compared in this study using the Rockyfor3D™ (ecorisQ Association) software and the newly developed RocFall3© (RocScience) code. The use of iPad Pro LiDAR survey provides accurate and high-resolution point clouds, with high speed of acquisition and real-time processing of data. Discontinuity sets identified from 3D models have represented the input for kinematic analyses of slopes, allowing to identify potential failure mechanisms among wedge and planar sliding or toppling. Rockfall simulations indicate the potential for rock blocks propagation and deposition over the whole study area. Comparing the results of rockfall simulations with the geomorphological map of the area it is evident the control exerted by the hydrographic network on rockfall propagation as demonstrated by the presence of screes and slope deposits along the main channels. Understanding the potential susceptibility to both propagation and deposition of rock blocks along the trail provides useful indication for the assessment of appropriate mitigation measures to realize for the safer touristic fruition of the site. [ABSTRACT FROM AUTHOR]

Thickness and stratigraphic settings of soils covering slopes potentially control susceptibility to initiation of rainfall-induced shallow landslides due to their local effect on slope hydrological response. Notwithstanding the relevance of the assessment of hazard to shallow landsliding at a distributed scale by approaches based on a coupled modelling of slope hydrological response and slope stability, the spatial variability of soil thickness and stratigraphic settings are factors poorly considered in the literature. Under these premises, this paper advances the well-known case study of rainfall-induced shallow landslides involving ash-fall pyroclastic soils covering the peri-Vesuvian mountains (Campania, southern Italy). In such a unique geomorphological setting, the soil covering is formed by alternating loose ash-fall pyroclastic deposits and paleosols, with high contrasts in hydraulic conductivity and total thickness decreasing as the slope angle increases, thus leading to the establishment of lateral flow and an increase of pore water pressure in localised sectors of the slope where soil horizon thickness is less. In particular, we investigate the effects, on hillslope hydrological regime and slope stability, of irregular bedrock topography, spatial variability of soil thickness and vertical hydraulic heterogeneity of soil horizons, by using a coupled three-dimensional hydrological and a probabilistic infinite slope stability model. The modelling is applied on a sample mountain catchment, located on Sarno Mountains (Campania, southern Italy), and calibrated using physics-based rainfall thresholds derived from the literature. The results obtained under five simulated constant rainfall intensities (2.5, 5, 10, 20 and 40 mm h−1) show an increase of soil pressure head and major failure probability corresponding to stratigraphic and morphological discontinuities, where a soil thickness reduction occurs. The outcomes obtained from modelling match the hypothesis of the formation of lateral throughflow due to the effect of intense rainfall, which leads to the increase of soil water pressure head and water content, up to values of near-saturation, in narrow zones of the slope, such as those of downslope reduction of total soil thickness and pinching out of soil horizons. The approach proposed can be conceived as a further advance in the comprehension of slope hydrological processes at a detailed scale and their effects on slope stability under given rainfall and antecedent soil hydrological conditions, therefore in predicting the most susceptible areas to initiation of rainfall-induced shallow landslides and the related I-D rainfall thresholds. Results obtained demonstrate the occurrence of a slope hydrological response depending on the spatial variability of soil thickness and leading to focus slope instability in specific slope sectors. The approach proposed is conceived to be potentially exportable to other slope environments for which a spatial modelling of soil thickness would be possible. [ABSTRACT FROM AUTHOR]

In recent decades, developing countries have experienced an increase in the impact of natural disasters due to ongoing climate change and the sustained expansion of urban areas. The intrinsic vulnerability of settlements, due to poverty and poor governance, as well as the lack of tools for urban occupation planning and mitigation protocols, has made such impacts particularly severe. Cuenca (Ecuador) is a significant example of a city that in recent decades has experienced considerable population growth (i.e. exposure) and an associated increase in loss due to landslide occurrence. Despite such effects, updated urban planning tools are absent, so an evaluation of multitemporal exposure to landslides and related risks is required. In this perspective, a potential urban planning tool is presented based on updated data depicting the spatial distribution of landslides and their predisposing factors, as well as population change between 2010 and 2020. In addition, a multitemporal analysis accounting for changes in exposure between 2010 and 2020 and an estimation of relative landside risk was carried out. Due to the absence of spatially distributed population data, energy supply contract data have been used as a proxy of the population. The results show that the current higher exposure and related relative risk are estimated for parishes (parroquias) located in the southern sector of the study area (i.e. Turi, Santa Ana, Tarqui, Nulti, Baños and Paccha). Moreover, the exposure multitemporal analysis indicates that most parishes located in the hilly areas bounding the city centre (i.e. Sayausi, San Joaquin, Tarqui, Sidcay, Baños, Ricaurte, Paccha and Chiquintad) are experiencing sustained population growth and will be potentially exposed to an increased risk with a consistently growing trend. The obtained relative risk map can be considered a valuable tool for guiding land planning, land management, occupation restriction and early warning strategy adoption in the area. The methodological approach used, which accounts for landslide susceptibility and population variation through proxy data analysis, has the potential to be applied in a similar context of growing population cities in low- to mid-income countries, where data usually needed for a comprehensive landslide risk analysis are non-existing or only partially available. [ABSTRACT FROM AUTHOR]

Statistical landslide susceptibility mapping is a topic in complete and constant evolution, especially since the introduction of machine learning (ML) methods. A new methodological approach is here presented, based on the ensemble of artificial neural network, generalized boosting model and maximum entropy ML algorithms. Such approach has been tested in the Monterosso al Mare area, Cinque Terre National Park (Northern Italy), severely hit by landslides in October 2011, following an extraordinary precipitation event, which caused extensive damage at this World Heritage site. Thirteen predisposing factors were selected and assessed according to the main characteristics of the territory and through variance inflation factor, whilst a database made of 260 landslides was adopted. Four different Ensemble techniques were applied, after the averaging of 300 stand-alone methods, each one providing validation scores such as ROC (receiver operating characteristics)/AUC (area under curve) and true skill statistics (TSS). A further model performance evaluation was achieved by assessing the uncertainty through the computation of the coefficient of variation (CV). Ensemble modelling thus showed improved reliability, testified by the higher scores, by the low values of CV and finally by a general consistency between the four Ensemble models adopted. Therefore, the improved reliability of Ensemble modelling confirms the efficacy and suitability of the proposed approach for decision-makers in land management at local and regional scales. [ABSTRACT FROM AUTHOR]

Landslides are among the most important and frequent natural calamities that cause severe socio-economic and human losses. After earthquakes, landslides are responsible for the greatest number of casualties and the largest amount of damage to man-made structures. On average, southern Italy is affected by a high spatial density of landslides due to its complex geological setting, which often predisposes it to slope instability phenomena under both natural and anthropogenic influences. Structurally complex formations are widespread in the southern Apennines and are characterized by high heterogeneity and very poor mechanical properties. Thus, these formations represent one of the main factors contributing to the predisposition of slopes to landsliding. In this paper, landslide-induced damage was investigated and analyzed in an area within the municipality of Agnone (Molise region), which is affected by a complex landslide that involves a structurally complex formation. The approaches used were based on six different methods that have previously been described in the literature, and a comparison of the results was made. Data regarding the damage, which consists largely of cracks observed in buildings and at the ground, were compiled through field surveys. The results were critically analyzed to note the advantages and constraints of each classification scheme. The aim of the work was to apply and compare different approaches in order to test the best and most accurate procedures for assessing damage due to landslides at the scale of individual buildings as well as to provide an objective assessment of the degree of landslide damage to structures and facilities. [ABSTRACT FROM AUTHOR]