Search

Cumaceans are an important component of the macrobenthic fauna and are preyed upon by several species of fishes. In the family Bodotriidae, Cyclaspis Sars, 1865 is the most speciose genus with more than 140 described species. Based on material from the Campos Basin and Espírito Santo Basin, southwestern Atlantic, we describe three new species of Cyclaspis: Cyclaspis goytacazes sp. nov., Cyclaspis lilianae sp. nov. and Cyclaspis tesauna sp. nov. We also report C. antipai Petrescu, 1995, C. roccatagliatai Petrescu, 1995 and C. unicornis Calman, 1907 as new records from the Brazilian coast. The first two species were known previously from Uruguay, and C. unicornis from the Caribbean Sea. Of the six species, only C. lilianae sp. nov. was found on the continental slope (415–1320 m) and the other five species were restricted to the continental shelf (18–139 m). A pictorial identification key for the 17 species of Cyclaspis known to occur in Brazil is provided. [ABSTRACT FROM AUTHOR]

Investigation were carried out targeting distribution and source apportioning of hydrocarbons in surface sediments from shallow to deep waters in the Campos Basin, one of the most important oil-producing provinces in Brazil. The observed levels of aliphatic (≤ 124 μg g−1) and polycyclic aromatic hydrocarbons (PAHs ≤ 599 ng g−1) are lower than those considered relevant for environmental risk to the benthic habitats. Higher median concentrations of aliphatic hydrocarbons (8.49 μg g−1) and PAHs (84.8 ng g−1) in the middle slope sediments (700–1000-m water depths) showed the influence of hydrodynamics upon hydrocarbon accumulation in the sediments. Diagnostic ratios and conventional statistical analysis applied to hydrocarbon data produced insufficient information on the contribution of different sources. These traditional approaches do not consider the potential changes affecting source assignment and therefore cannot deal with the uncertainties. The fuzzy logic applied as an alternative method for data treatment successfully incorporated the uncertainties in the differentiation between petrogenic and pyrolytic sources, including those due to degradation. Moreover, by using fuzzy logic, it was possible to identify that water circulation patterns, mass transport, deposition, and degradation processes are more relevant factors in determining hydrocarbon composition than source proximity. [ABSTRACT FROM AUTHOR]

In this work the archaea and eubacteria community of a hypersaline produced water from the Campos Basin that had been transported and discharged to an onshore storage facility was evaluated by 16S recombinant RNA (rRNA) gene sequence analysis. The produced water had a hypersaline salt content of 10 ( w/ v), had a carbon oxygen demand (COD) of 4,300 mg/l and contains phenol and other aromatic compounds. The high salt and COD content and the presence of toxic phenolic compounds present a problem for conventional discharge to open seawater. In previous studies, we demonstrated that the COD and phenolic content could be largely removed under aerobic conditions, without dilution, by either addition of phenol degrading Haloarchaea or the addition of nutrients alone. In this study our goal was to characterize the microbial community to gain further insight into the persistence of reservoir community members in the produced water and the potential for bioremediation of COD and toxic contaminants. Members of the archaea community were consistent with previously identified communities from mesothermic reservoirs. All identified archaea were located within the phylum Euryarchaeota, with 98 % being identified as methanogens while 2 % could not be affiliated with any known genus. Of the identified archaea, 37 % were identified as members of the strictly carbon-dioxide-reducing genus Methanoplanus and 59 % as members of the acetoclastic genus Methanosaeta. No Haloarchaea were detected, consistent with the need to add these organisms for COD and aromatic removal. Marinobacter and Halomonas dominated the eubacterial community. The presence of these genera is consistent with the ability to stimulate COD and aromatic removal with nutrient addition. In addition, anaerobic members of the phyla Thermotogae, Firmicutes, and unclassified eubacteria were identified and may represent reservoir organisms associated with the conversion hydrocarbons to methane. [ABSTRACT FROM AUTHOR]

Lipid biomarkers [fatty acids (FAs), sterols and alcohols] and total organic carbon (TOC) were analyzed in 48 surface (0-2 cm) sediment samples collected twice (winter 2008/2009 and summer/2009) in two transects ranging from 25 to 3,000 m depths. This sampling array encompassed the major upwelling region in the southeastern Brazilian continental margin, where the river influence is probably minimal. The objectives were (1) to evaluate the sources, transport and major areas of organic matter (OM) accumulation in the continental margin and (2) to identify the fraction of OM that is potentially available to secondary benthic producers. As expected from the regional oceanographic characteristics, lipids derived from primary and secondary autochthonous producers (0.073-5.3 mg gTOC) made the major fraction of the sedimentary OM, whereas lipids from allochthonous sources (0.043-0.40 mg gTOC) and from bacteria (<0.01-0.43 mg gTOC) were of relatively less importance. The accumulation of OM in the sediments was highly dependent on the coupling of physical (hydrodynamics) and biological (response to upwelling) factors. It was found that while some restricted areas in the shelf was a sink of labile OM, the export of this material to the upper and middle slope (400-1,000 m depths) can represent an important source of bioavailable OM to the deep sea benthic community. [ABSTRACT FROM AUTHOR]

The impact of drilling oil activities in the Brazilian Bonito Field/Campos Basin (Rio de Janeiro) shell drilling (300 m) using nonaqueous fluids (NAFs) was investigated with respect to Al, Fe, Mn, Ba, Co, Pb, Cu, As, Hg, Cr, Ni, Zn, Cd, V, and aliphatic and polynuclear aromatic hydrocarbons concentrations in the sediment. Sampling took place in three different times during approximately 33 months. For the metals Al, As, Co, Cr, Cu, Cd, Fe, Ni, Mn, V, and Zn, no significant variation was observed after drilling activities in most of the stations. However, an increase was found in Ba concentration—due to the drilling activity—without return to the levels found 22 months after drilling. High Ba contents was already detected prior to well drilling, probably due to drilling activities in other wells nearby. Hydrocarbon contents also suggest previous anthropogenic activities. Aliphatic hydrocarbon contents were in the range usually reported in other drilling sites. The same behavior was observed in the case of polyaromatic hydrocarbons. Nevertheless, the n-alkane concentration increased sharply after drilling, returning almost to predrilling levels 22 months after drilling activities. [ABSTRACT FROM AUTHOR]

The present study investigates the effects of drill cutting discharges on the structure of meiofauna communities in an area of the shelf break at Campos Basin, Southeast Brazil. Drilling activities were operated, in a first phase, with water-based fluid and, in a second phase, with synthetic fluid paraffin-based (NAF-III). A total of 135 samples taken at a pre-drilling situation (MS1) and two post-drilling moments (MS2 and MS3—3 and 22 months post-drilling, respectively) were analyzed. Effects on meiofauna were dependent on two main factors: 1—the impact received during drilling operation, if water-based or synthetic/water-based drilling fluid and 2—the background state, if it already presented signs of previous drilling activities or not. Based on univariate and multivariate analysis, there were evidences that the most affected area after drilling was those under the influence of synthetic-based fluid and that already had signs of previous drillings activities. The region impacted only by water-based fluid was less affected and the only one that completely recovered after 22 months. Nematodes and copepods had different responses to the impact. While copepods flourish in the impacted area and recovered 22 months after drilling, nematodes were adversely affected shortly after drilling and the community structure only recovered where hydrocarbons had been depleted. [ABSTRACT FROM AUTHOR]

The article focuses on the MAPEM project, Environmental Monitoring of Offshore Drilling for Petroleum Exploration done for shallow waters at Campos basin, Southeast Brazil. It informs that the project is a first multidisciplinary study in Southwest Atlantic to investigate the effects of cuttings discharge impregnated with one of the new-generation non-aqueous fluids. The non-aqueous fluids are used for offshore drilling in deep-water and shallow environments. It is stated that the project was conducted with financial support by the Studies and Projects Finance Agency, Brazilian Research Council and Brazilian Petroleum and Gas Institute.

Numerical models that predict the fate of drilling discharges at sea constitute a valuable tool for both the oil industry and regulatory agencies. In order to provide reliable estimates, models must be validated through the comparison of predictions with field or laboratory observations. In this paper, we used the Offshore Operators Committee Model to simulate the discharges from two wells drilled at Campos Basin, offshore SE Brazil, and compared the results with field observations obtained 3 months after drilling. The comparison showed that the model provided reasonable predictions, considering that data about currents were reconstructed and theoretical data were used to characterize the classes of solids. The model proved to be a valuable tool to determine the degree of potential impact associated to drilling activities. However, since the accuracy of the model is directly dependent on the quality of input data, different possible scenarios should be considered when used for forecast modeling. [ABSTRACT FROM AUTHOR]

This paper assesses the effects of non-aqueous fluids (NAF)-associated drill cuttings discharge on shelf break macrobenthic communities in the Campos Basin, off the southeast Brazilian coast, Rio de Janeiro State. Samples were taken with a 0.25-m2 box corer from surrounding two oil and gas wells on three monitoring cruises: before drilling, three months after drilling, and 22 months after drilling. Statistical methodologies used Bayesian geostatistical and analysis of variance models to evaluate the effects of the NAF-associated drill cuttings discharge and to define the impact area. The results indicated that marked variations were not observed in the number of families between cruises, though there were changes in the fauna composition. The changes seen in biological descriptors in both control and background situation areas were not considered significant, showing a temporal homogeneity in means. The impact area presented changes in biological descriptors of communities and trophic structure during the three cruises and such changes were correlated to chemical and physical variables related to the drilling activities, as a result of the mix of drill cuttings and sediment and the anoxic conditions established in the substrate. In that area, three months after drilling, a decrease in diversity and an increase in density, motile deposit-feeders and Pol/Crp ratio, and dominance of opportunistic organisms, such as the capitellid Capitella sp., were observed and, 22 months after drilling, an increase of diversity, reduction of dominance of capitellid polychaete, changes in the fauna composition, and a dominance of opportunistic burrowing and tube-building organisms were observed, indicating an ecological succession process. [ABSTRACT FROM AUTHOR]

This paper describes the effects of drilling disturbance on the seafloor of the upper continental slope of the Campos Basin, Brazil, as a result of the project Environmental Monitoring of Offshore Drilling for Petroleum Exploration – MAPEM. Field sampling was carried out surrounding wells, operated by the company PETROBRAS, to compare sediment properties of the seafloor, including grain-size distribution, total organic carbon, and clay mineral composition, prior to drilling with samples obtained 3 and 22 months after drilling. The sampling grid used had 74 stations, 68 of which were located along 7 radials from the well up to a distance of 500 m. The other 6 stations were used as reference, and were located 2,500 m from the well. The results show no significant sedimentological variation in the area affected by drilling activity. The observed sedimentological changes include a fining of grain size, increase in total organic carbon, an increase in gibbsite, illite, and smectite, and a decrease in kaolinite after drilling took place. [ABSTRACT FROM AUTHOR]

This paper describes the use of Bayesian spatial models to develop the concept of a spatial–temporal mask for the purpose of identifying regions in which before and after drilling effects are most clearly defined and from which the consequences of exposure of macrofauna and meiofauna to the release of drilling discharges can be evaluated over time. To determine the effects of drilling fluids and drill-cuttings on the marine benthic community, it is essential to know not only where discharged materials ended up within the possible impact area, but also the chemical concentrations to which biota were exposed during and after drilling. Barium and light hydrocarbons were used as chemical tracers for water-based and non-aqueous-based fluids in a shallow water site in the Campos Basin, off the coast of Brazil. Since the site showed evidence of exposure to waste material from earlier drilling, the analysis needed to take into account the background concentrations of these compounds. Using the Bayesian models, concentrations at unsampled sites were predicted and regions altered and previously contaminated were identified. [ABSTRACT FROM AUTHOR]

The Neogene-to-Quaternary sediment section along the south-eastern Brazilian margin was deeply influenced by bottom currents acting from the upper slope down to the continental rise in water depths ranging from 100 m to > 3,500 m. Different depositional styles are observed as a resultant of the interaction between bottom currents, seafloor topography, available grain size and time span involved in the process. Their importance in the sedimentary record varies in accordance with the intensity of that interaction. Deposits associated to bottom currents are both coarse-grained and fine-grained and are distributed along all margins. The identification of coarse-grained deposits in deep-water is critical for the petroleum industry, thus characterising sandy contourites as relevant for the understanding of reservoir analogues. Slope plastered sand sheets occur in the upper slope setting. They are strike-fed, along slope-elongated and internally characterised by high amplitude seismic reflections usually developing reflection free blankets above erosional terraces due to their small thickness (in average less than 30 m thick). Middle and lower slope contourites are mostly constituted of fine-grained plastered and separated drifts, where a general upslope migration trend and an erosional basal surface are observed. The seafloor topography from the foot of the slope towards the continental rise is controlled by salt walls and diapirs which influence the acceleration of the currents and the development of contourite drifts. Paleoceanographic reconstructions supported by seismic evidence indicate that the major currents sculpting the seafloor are southerly originated and their action can overcome the importance of gravity currents where continental supply is reduced. [ABSTRACT FROM AUTHOR]