Search

A novel electrochemical method has been developed, based on a covalent organic framework (COF) and reduced graphene oxide (rGO), to detect fentanyl and alfentanil. COF nanomaterials with chrysanthemum morphology obtained by solvothermal reaction contain rich active sites for electrochemical catalytic reaction, thus improving the detection performance of the designed sensor. Reduced graphene oxide improves the sensor's sensitivity due to enhanced electron transfer. Under optimized experimental conditions, the fabricated electrode presents a linear range of 0.02 to 7.26 μM for alfentanil and 0.1 to 6.54 μM for fentanyl, with detection limits of 6.7 nM and 33 nM, respectively. In addition, the sensor possesses excellent selectivity, outstanding reproducibility, and acceptable stability. The proposed sensor is feasible for the reliable monitoring of fentanyl and alfentanil in human serum samples, with acceptable reliability and high potential in real-world applications. Finally, the electrochemical characteristic fingerprint of fentanyl is investigated by studying the electrochemical behavior of alfentanil and fentanyl on the electrode surface. [ABSTRACT FROM AUTHOR]

Scots pine (Pinus sylvestris L.) panels were modified with glutaraldehyde (GA) to various weight percent gains and subsequently coated with several commercial coatings. The drying rate and adhesion of the coatings on the modified wood were measured; the coated/modified woods were exposed outdoors to analyze how the wood modifications influence the coating deterioration. The results showed that GA modification caused an increase in the drying rate of the waterborne coatings, but had no influence on drying of tested solvent-borne coatings. GA-modification did not change the dry adhesion but reduced the wood strength in a pull-off test. Wet adhesion of waterborne coatings was improved, while that of the solvent-borne coatings tended to be somewhat reduced. During 22 months of outdoor weathering, the coated/modified samples exhibited lower moisture content than the coated/unmodified samples, but GA modification didn't contribute a substantially synergistic effect with surface coatings on resistance to weathering. [ABSTRACT FROM AUTHOR]