Search

The particle breakage effect and compression characteristics of calcareous sand are related to the water content in the sand material. However, the effects of water content on the particle breakage and compression characteristics of calcareous sand have rarely been investigated. In this work, 50 sets of confined compression tests were conducted on calcareous sand specimens, and the compression characteristics and particle breakage effects of two single-particle-size groups (particle size ranges of 1–0.5 mm and 0.5–0.25 mm) of calcareous sand were investigated under five different water contents. The test results showed that with the increase in the water content, the final compression deformation of calcareous sand was positively correlated with the water content. The final compression deformation decreased when the water content reached a certain value. The water content corresponding to the peak final compression deformation was related to the gradation of the calcareous sand; the specific values were 10% and 15% for particle size ranges of 1–0.5 mm and 0.5–0.25 mm, respectively. With the increase in the water content, the slope of the loading curve of calcareous sand appeared to increase and then decrease, reaching maximum when the water content was 10%. Moreover, the slope of the loading curve was close to twice that of the loading curve of dry sand, whereas the slope of the unloading curve changed little. Under the same water content, the initial gradation had no effect on the compression and unloading characteristics of the specimens beyond a vertical pressure of 1 MPa. The effects of the variation in the water content on the particle breakage of calcareous sand were mainly reflected in the softening effect of water on the specimen particles, which reduced the Mohr strength of the particles. [ABSTRACT FROM AUTHOR]

Thalassemia is a group of common hereditary anemias that cause significant morbidity and mortality worldwide. However, precisely diagnosing thalassemia, especially rare thalassemia variants, is still challenging. Long-range PCR and long-molecule sequencing on the PacBio Sequel II platform utilized in this study could cover the entire HBA1, HBA2 and HBB genes, enabling the diagnosis of most of the common and rare types of thalassemia variants. In this study, 100 cases of suspected thalassemia were subjected to traditional thalassemia testing and third-generation sequencing for thalassemia genetic diagnosis. Compared with traditional diagnostic methods, an additional 10 cases of rare clinically significant variants, including 3 cases of structure variants and 7 cases of single nucleotide variations (SNVs) were identified, of which a case with − α3.7 subtype III (− α3.7III) was first identified and validated in the Chinese population. Other rare variants of 11.1 kb deletions (− 11.1/αα), triplicate α-globin genes (aaa3.7/αα) and rare SNVs have also been thoroughly detected. The results showed that rare thalassemia variants are not rare but have been misdiagnosed by conventional methods. The results further validated third-generation sequencing as a promising method for rare thalassemia genetic testing. [ABSTRACT FROM AUTHOR]

Methylmalonic acidemia combined with homocysteinemia and cobalamin C type (MMA-CblC, MIM # 277400) is a rare inherited disease with cobalamin metabolic disorder, which are caused by deficiency in the MMACHC gene. A couple with a proband child carried with compound heterozygous mutations of MMACHC (c.609G>A and c.567 dup T, NM_015506) sought for assisted reproductive technology to avoid the transmission of pathogenic genetic variants and unnecessary induction of labor. Thus, in vitro fertilization (IVF), preimplantation genetic testing (PGT), and prenatal genetic diagnosis were applied to fulfill this clinical demand. In this study, seven embryos were biopsied and carried out whole-genome amplification using multiple annealing and looping-based amplification cycle (MALBAC) method. Sanger sequencing together with copy number variation (CNV) analysis and single-nucleotide polymorphism (SNP) haplotyping was conducted to detect the mutated alleles and chromosomal abnormalities simultaneously. Three embryos (E07, E06, and E02) were confirmed without CNVs and inherited mutations at MMACHC gene. Embryo E07 with the best embryo ranking of 5BB was selected preferentially to transfer which led to a successful pregnancy and an unaffected live birth. Prenatal genetic diagnosing with amniotic fluid cells, Sanger sequencing with cord blood cells, and neonate MMA screening further verified our successful application of PGT in preventing mutated allele transmission for this rare inherited disease. [ABSTRACT FROM AUTHOR]

To discuss combinations of traditional screening and noninvasive prenatal screening (NIPS) and to compare which traditional screening is the most suitable first-line screening approach to NIPS, pregnant women were recruited in this retrospective observational study. Pregnant women underwent one of four traditional screening tests. The 9 contingent models were combined by high risk cut-offs of 1:50, 1:100, 1:270 and intermediate risk cut-offs of 1:1000, 1:1500, 1:2000. We analyzed cost and performance of various screening models with contingent screening of different risk cut-offs. Compared with other screening tests, combined first-trimester screening (CFTS) had the lowest proportion of high risk (≥1:270) with the highest detection rate (DR) (78.79%) and the lowest proportion of intermediate risk (1:271~1:1000). When intermediate risk was 1:51 ~1:1500, CFTS as first-line screening had the lowest cost with DR of 93.94%. Other screening tests as the first-line screening with intermediate risk of 1:51~1:1000 had the lowest cost, there DR were 90.91%, 84.62%, 91.67%, respectively. Our study demonstrated if only one traditional screening was allowed to screen pregnant women, CFTS was recommended as the first choice. According to local health and economic conditions, adopting appropriate traditional screening with suitable cut-offs as first-line screening will contributed to a cost-effective screening model. [ABSTRACT FROM AUTHOR]

The formation of the micro-patterned structure in the vertical light-emitting diodes (VLEDs) is a practicable solution for light extraction enhancement. In this study, the Monte Carlo ray tracing method was used to investigate the effects of the absorption coefficient of GaN material and structural parameters of 3D sphere-like arrays on the light extraction efficiency (LEE). The simulation results showed that a maximum LEE change of about 17 % can be achieved when the absorption coefficient ( α) varies between 0 and to 10 mm. The 3D sphere-like arrays can effectively improve the LEE of GaN VLEDs. The LEE decreases as the period of the 3D sphere-like arrays increases. The LEE for close-packed convex hemisphere arrays with R = 3 μm and α = 0/mm is about 4.5 times greater than that for planar VLEDs. For the close-packed convex hemisphere arrays, the LEE of the GaN VLEDs is inversely correlated with their diameter. However, for the close-packed concave hemisphere arrays, an opposite trend was observed. In addition, for the VLEDs with the concave sphere-like arrays, an increase in array height leads to an improved LEE. These results provide theoretical guideline for the design of the GaN VLEDs with high LEE. [ABSTRACT FROM AUTHOR]

Presents a study which examined the contemporary crustal movement of continental China obtained by global positioning system (GPS) measurements. Objectives of the data analysis; Advantages of using International GPS service in the study; Combination of daily solutions to determine station velocities and coordinates by the standard weighted least squares adjustment.