Search

GenX (hexafluoropropylene oxide dimer acid) belongs to the group of per- and poly-fluoroalkyl substance (PFAS) compounds introduced to replace perfluorooctanoic acid (PFOA), which has been phased out in industrial and consumer product formulations. While GenX has been investigated in lab animals, there is limited information available regarding its uptake and translocation in wheat and rice. This study reports on a greenhouse experiment in which wheat and rice grown under flooded and non-flooded conditions were exposed to two GenX concentrations in the soil (0.4 mg kg−1 and 2 mg kg−1). GenX was analysed in the soil, porewater and shoots using targeted liquid chromatography-tandem mass spectroscopy (LC-MS/MS) analysis. Extractable organic fluorine (EOF) was determined using high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-GFMAS) instrument. Results showed that different species took up different amounts of GenX. The GenX concentration in rice shoots was found to be 2.34 (± 0.45) and 4.11 (± 0.87) μg g−1 under flooded and non-flooded conditions, respectively, at a low exposure level. At high exposure, the GenX concentrations in flooded and non-flooded rice shoots increased threefold to 10.4 (± 0.41) and 13.4 (± 0.72) μg g−1, respectively. Wheat shoots showed similar concentrations and increases between low- and high-level exposure. The translocation factor was significantly higher (P = 0.013) in non-flooded rice compared to flooded rice. The GenX bioaccumulation behaviours under the same culture conditions (e.g. temperature, humidity, light, same GenX concentration in the soil) were significantly different in non-flooded and flooded rice (P < 0.001). Non-flooded rice plants displayed a higher level of GenX bioaccumulation than flooded ones. Following exposure to GenX, flooded rice plants showed a reduction in biomass (25%) compared to the control plants (P < 0.014). Our findings indicate that GenX is a bioaccumulative compound, the presence of which likely inhibits the growth of plants. [ABSTRACT FROM AUTHOR]

With recently legislated maximum levels of inorganic arsenic (iAs) in white and brown rice in Canada, the regulatory bodies are evaluating the need for regulation of As levels in infant food products. Rice is a major part of infants' diet, and therefore, the presence of As in this staple food causes concerns. So far, the scientific community was lacking suitable certified reference material (CRM) which could be used to assess the accuracy of developed analytical methods for As speciation in infants' food products. As a result, we have developed BARI-1, a baby cereal coarse rice flour reference material which was certified for total arsenic (0.248 ± 0.018 mg kg−1), cadmium (0.0134 ± 0.0014 mg kg−1), mercury (0.0026 ± 0.0003 mg kg−1), lead (0.0064 ± 0.0016 mg kg−1), inorganic As (0.113 ± 0.016 mg kg−1) and dimethylarsinic acid (DMA) (0.115 ± 0.010 mg kg−1), and reference value for monomethylarsonic acid (MMA) (0.0045 ± 0.0008 mg kg−1) was reported. We also observed trace amounts of an unknown As compound, with chromatographic retention time close to DMA. Participating laboratories were allowed to use their in-house-validated extraction and/or digestion methods, and the detection of total metals was done by ICP-MS whereas HPLC-ICP-MS was used for As speciation. Despite the diversity in sample preparation and quantitation methods, reported values were in good agreement. For iAs measurement, the comparison between hydride generation ICP-MS and HPLC-ICP-MS found iAs overestimation with the former method, possibly due to interference from DMA. The certification was accomplished with a CRM rapid response approach in collaborative, focused effort completing the CRM development in few months instead of the typical multiyear project. This approach allowed to respond to measurement needs in a timely fashion. [ABSTRACT FROM AUTHOR]

The fungi Aureobasidium pullulans, Mortierella humilis, Trichoderma harzianum and Phoma glomerata were used to investigate the formation of selenium- and tellurium-containing nanoparticles during growth on selenium- and tellurium-containing media. Most organisms were able to grow on both selenium- and tellurium-containing media at concentrations of 1 mM resulting in extensive precipitation of elemental selenium and tellurium on fungal surfaces as observed by the red and black colour changes. Red or black deposits were confirmed as elemental selenium and tellurium, respectively. Selenium oxide and tellurium oxide were also found after growth of Trichoderma harzianum with 1 mM selenite and tellurite as well as the formation of elemental selenium and tellurium. The hyphal matrix provided nucleation sites for metalloid deposition with extracellular protein and extracellular polymeric substances localizing the resultant Se or Te nanoparticles. These findings are relevant to remedial treatments for selenium and tellurium and to novel approaches for selenium and tellurium biorecovery. [ABSTRACT FROM AUTHOR]

This article is aimed at researchers interested in organic molecules which contain a heteroatom but who have never considered using inductively coupled plasma mass spectrometry (ICPMS) or who have used ICPMS for years and developed numerous methods for analysis of target elemental species. We try to illustrate (1) that ICPMS has been very useful for speciation analysis of metal(loid) target species and that there is now a trend to replace the costly detector with cheaper detection systems for routine target analysis, and (2) that ICPMS has been used and will be used even more in the future for non-targeted analysis of elements which are not normally associated with ICPMS analysis, such as non-metals such as sulfur, phosphorus, chlorine and fluorine. [ABSTRACT FROM AUTHOR]

Inorganic arsenic (iAs) in 13 store-bought edible seaweed samples and 34 dried kelp ( Laminaria digitata) samples was determined by a newly developed, field-deployable method (FDM) with the aid of a field test kit for arsenic in water. Results from the FDM were compared to results from speciation analysis achieved by using high performance liquid chromatography coupled to inductively coupled plasma mass spectrometry (HPLC-ICP-MS). The FDM consisted of a simple extraction method using diluted HNO to quantitatively extract iAs without decomposing the organoarsenicals to iAs followed by the selective volatilisation of iAs as arsine (AsH) and subsequent chemo-trapping on a filter paper soaked in mercury bromide (HgBr) solution. Method optimization with a sub-set of samples showed 80-94% iAs recovery with the FDM with no matrix effect from organo-arsenic species in the form of dimethylarsinic acid (DMA) on the iAs concentration. The method displayed good reproducibility with an average error of ±19% and validation by HPLC-ICP-MS showed that the results from the FDM were comparable (slope = 1.03, R = 0.70) to those from speciation analysis with no bias. The FDM can be conducted within an hour and the observed limit of quantification was around 0.05 mg kg (dry weight). This method is well suited for on-site monitoring of iAs in seaweed before it is harvested and can thus be recommended for use as a screening method for iAs in seaweed. [ABSTRACT FROM AUTHOR]