Search

Antiviral ultrafiltration membranes (UF) were successfully fabricated using amphiphilic polyvinylchloride-co-acrylic acid) (PVC-AA), which were incorporated with organometallic compound manganese acetylacetonate Mn(acac)3. Non-solvent induced phase separation (NIPS) method was used to prepare the UF membrane based on PVC-AA. Fabricated membranes were characterized by different analytical methods. The fabricated membranes (PVC-AA/ Mn(acac)3) provided the highest removal percentage for proteins when compared to the neat amphiphilic (PVC-AA). The hydrophilicity and antifouling properties of the membranes were improved with increasing load of manganese acetylacetonate Mn(acac)3 in the polymeric solution to 1%. The membrane with 1 wt% Mn(acac)3 (UF3) exhibited the best antifouling properties using bovine serum albumin 1 g.L−1and sodium alginate 2 g.L−1 and a real sample of wastewater namely ~ 99% of flux recovery ratio. PVC-AA- Mn(acac)3 provided antifouling and antiviral properties. The viral test using real sewage wastewater indicated that the membranes UF 2 and UF3 removes all viruses of 100%, which indicated negative detection in the treated water. [ABSTRACT FROM AUTHOR]

In lithium-ion batteries (LIBs), separators play a vital role in lithium-ion (Li+) transport, and thus affect rate performance, battery life, and safety. Here, a new kind of multifunctional copolymer poly(acrylonitrile-co-lithium acrylate-co-butyl acrylate) (PAAB-Li) is synthesized through soap-free emulsion polymerization, and is used to form homogeneous-covered separator based on PP matrix by a simple dip-annealing process. Compared to the bare PP separator, the modified separators with PAAB-Li enable higher ionic conductivity, higher lithium ion transference number (increased from 0.360 to 0.525), and lower interface impedance (reduced from 155 Ω to 34 Ω). It has been indicated that PAAB-Li functional layer significantly promotes the fast transport of Li+ and improves the compatibility of the separator/electrolyte-electrode interface. The LiCoO2/graphite cells with the PAAB-Li-assisted separator demonstrate excellent cycle stability and rate performance. In addition, the Li symmetric cells with the modified separator stably cycle over 800 h, indicating the functional layer effectively suppresses the lithium dendrite growth. This facile strategy can be easily applied to LIBs requiring high safety and even be scalable to Li metal batteries. Moreover, the possible mechanism of the PAAB-Li functional layer promoting fast and uniform Li+ transport is discussed in this paper. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Zhejiang University: Science A is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

To functionalize poly(vinyl chloride) (PVC) for various applications, monomers containing tertiary amine group are incorporated into PVC via atom transfer radical polymerization (ATRP) initiated by the labile chlorines in their backbones. The kinetics of synthesis was carefully investigated, and it is proven that the grafting polymerization process can be effectively controlled by regulating the reaction time. The membranes are fabricated using PVC and copolymers by non-solvent induced phase separation (NIPS) process. The hydrophilicity and pore structure of copolymer membranes were enhanced as well, these membranes are endowed with positive charge. When PDMA% ( i.e., the PDMA weight percentage in copolymer) is 31.1%, the flux and Victoria blue B rejection are 26.0 L·m·h (0.5 MPa) and 91.2%, respectively. Thus, the newly synthesized polymer is proven to be a promising material for dye separation with positive charges. [ABSTRACT FROM AUTHOR]

To improve the performances of HDPE-based separators, polyether chains were incorporated into HDPE membranes by blending with poly(ethylene- block-ethylene glycol) (PE- b-PEG) via thermally induced phase separation (TIPS) process. By measuring the composition, morphology, crystallinity, ion conductivity, etc, the influence of PE- b-PEG on structures and properties of the blend separator were investigated. It was found that the incorporated PEG chains yielded higher surface energy for HDPE separator and improved affinity to liquid electrolyte. Thus, the stability of liquid electrolyte trapped in separator was increased while the interfacial resistance between separator and electrode was reduced effectively. The ionic conductivity of liquid electrolyte soaked separator could reach 1.28 × 10 S·cm at 25°C, and the electrochemical stability window was up to 4.5 V (versus Li/Li). These results revealed that blending PE- b-PEG into porous HDPE membranes could efficiently improve the performances of PE separators for lithium batteries. [ABSTRACT FROM AUTHOR]

Three well-defined diblock copolymers of poly(methyl methacrylate- b-methacrylic acid) (P(MMA- b-MAA)) were synthesized using atom transfer radical polymerization method and varying poly(methacrylic acid) (PMAA) chain lengths. These copolymers were blended with PVC to fabricate porous membranes via phase inversion process. Membrane morphologies were observed by scanning electron microscopy (SEM), and chemical composition changes of the membrane surfaces were measured by X-ray photoelectron spectroscopy (XPS). Static and dynamic protein adsorption experiments were used to evaluate antifouling properties of the blend membranes. It was found that, the blend membranes containing longer PMAA arm length showed lower static protein adsorption, higher water permeation flux and better protein solution flux recovery. [ABSTRACT FROM AUTHOR]