Search

On December 22, 2018, the eruption and flank collapse of the Anak Krakatau volcano generated a tsunami in the Sunda Strait causing catastrophic damage to uninhabited coastlines proximal to the source. Along the heavily populated shores of Banten and Lampung provinces in Java and Sumatra, tsunami waves caused severe damage, extensive inundation and more than 430 deaths. An international tsunami survey team (ITST) deployed 6 weeks after the event documented the tsunami effects including runup heights, flow depths and inundation distances, as well as sediment deposition patterns and impacts on infrastructure and the natural environment. The team also interviewed numerous eyewitnesses and educated residents about tsunami hazards. This ITST was the first to visit and document the extreme tsunami effects on the small islands in the Sunda Strait closest to Anak Krakatau (Rakata, Panjang, Sertung, Sebesi and Panaitan). Along the steep slopes of Rakata and Sertung islands, located less than 5 km from and facing directly towards the southwest flank of Anak Krakatau, all of the dense coastal vegetation was stripped to bare earth up to elevations of more than 80 m, while on the northeast tip of Sertung Island, facing away from the source, a single tree remained standing after flow depths of > 11 m above ground struck there. The runup distributions on the islands encircling Anak Krakatau highlight the directivity of the tsunami source suggesting that the collapse occurred towards the southwest. This manifested as tsunami runup of < 10 m on Sebesi Island, located 15 km northeast of the source, contrasting with tsunami flow heights > 10 m that stripped away coastal forests to bare rock for up to 400 m inland in the Ujung Kulon National Park, located 50 km to the south-southwest. Inundation and damage were mostly limited to within 400 m of the shoreline, likely the result of the relatively short wavelengths caused by the landslide generated tsunami. A significant variation in tsunami impact was observed along the shorelines of the Sunda Strait, with runup heights rapidly decreasing with distance from the inferred tsunami source. To model the event we applied a hot-start initial condition that roughly reproduced the measured tsunami runup heights along Rakata and Sertung. The waveforms were then propagated through the Sunda Straight using a Boussinesq-type wave model. The results showed a good fit to the observed heights along the Java and Sumatra coastlines, the northern coast of Panaitan Island and Ujung Kulon Nation Park. The model also produced an acceptable fit to the observed amplitudes at tide gauges. Despite the regional volcanic and tsunamigenic history of the region, and 6-months of eruptive activity prior to the event, the tsunami largely caught the local population off guard. This further highlights the need for community-based education and awareness programs as essential to save lives in locales at risk from locally generated tsunamis. [ABSTRACT FROM AUTHOR]

Tsunamis are one of the most catastrophic natural hazards that can devastate coastal regions. Most common mechanisms that generate tsunamis are undersea earthquakes and submarine landslides. However, in enclosed basins, such as fjords, reservoirs, and lakes, subaerial landslides can also generate devastating tsunamis with similar or worse consequences, because of a more efficient wave generation. Here, we present the validation of a three-dimensional (3D) numerical model, TSUNAMI3D, by comparing numerical results with a set of subaerial landslide laboratory experiments carried out in the large tsunami wave basin at the Oregon State University (OSU). Results obtained from the laboratory experiments show that subaerial landslides generate highly non-linear waves with complex wave patterns and runup, challenging existing numerical models. The 3D numerical model is first verified with a commercial code, FLOW3D, to obtain a compromise between the model's spatial-time resolution accuracy and computational cost. Second, the 3D numerical model and the commercial code are validated with a set of OSU laboratory experiments comprising three different layouts or basin configurations, namely, fjord, curved headland, and basin-wide. Simplified material rheology and key parameters required for modeling subaerial landslides are defined. Numerical models' relative errors are estimated and analyzed, and the models' limitations are discussed. In general, numerical models' relative errors are found to be acceptable in most of the validation tests except those tests located close to the wave generation region. Validation results confirm that the 3D numerical models with simplified landslide rheology can be used to understand and reproduce the complex non-linear wave propagation and runup generated by subaerial landslides. Thus, TSUNAMI3D can help assess tsunami hazards in communities located in proximity to potential subaerial landslides. Also, the set of physical experiments can be used for further numerical validation efforts, helping tsunami organizations, e.g., the National Tsunami Hazard Mitigation Program, to amend existing or develop better numerical models and thus, improve inundation/evacuation mapping products that would save lives and property. [ABSTRACT FROM AUTHOR]

Landslides of subaerial and submarine origin may generate tsunamis with locally extreme amplitudes and runup. While the landslides themselves are dangerous, the hazards are compounded by the generation of tsunamis along coastlines, in enclosed water bodies, and off continental shelves and islands. Tsunamis generated by three-dimensional deformable granular landslides were studied on planar and conical hill slopes in the three-dimensional NEES tsunami wave basin at Oregon State University based on the generalized Froude similarity. A unique pneumatic landslide tsunami generator (LTG) was deployed to control the kinematics and acceleration of the naturally rounded river gravel and cobble landslides to simulate broad ranges of landslide shapes and velocities along the slope. Lateral and overhead cameras are used to measure the landslide shapes and kinematics, while acoustic transducers provide the shape of the subaqueous deposits. The subaerial landslide shape is extracted from the camera images as the landslide propagates under gravity down the hill slope, and surface reconstruction of the landslide is conducted using the stereo particle image velocimetry (PIV) system on the conical hill slope. Subaerial landslide surface velocities are measured with a planar PIV system on the planar hill slope and stereo PIV system on the conical hill slope. The submarine deposits are characterized by the runout distances and the deposit thickness distributions. Larger cobbles are observed producing hummock type features near the maximum runout length. These unique laboratory landslide experiments serve to validate deformable landslide models as well as provide the source characteristics for tsunami generation. [ABSTRACT FROM AUTHOR]

Twenty papers on the study of tsunamis are included in Volume III of the PAGEOPH topical issue “Global Tsunami Science: Past and Future”. Volume I of this topical issue was published as PAGEOPH, vol. 173, No. 12, 2016 and Volume II as PAGEOPH, vol. 174, No. 8, 2017. Two papers in Volume III focus on specific details of the 2009 Samoa and the 1923 northern Kamchatka tsunamis; they are followed by three papers related to tsunami hazard assessment for three different regions of the world oceans: South Africa, Pacific coast of Mexico and the northwestern part of the Indian Ocean. The next six papers are on various aspects of tsunami hydrodynamics and numerical modelling, including tsunami edge waves, resonant behaviour of compressible water layer during tsunamigenic earthquakes, dispersive properties of seismic and volcanically generated tsunami waves, tsunami runup on a vertical wall and influence of earthquake rupture velocity on maximum tsunami runup. Four papers discuss problems of tsunami warning and real-time forecasting for Central America, the Mediterranean coast of France, the coast of Peru, and some general problems regarding the optimum use of the DART buoy network for effective real-time tsunami warning in the Pacific Ocean. Two papers describe historical and paleotsunami studies in the Russian Far East. The final set of three papers importantly investigates tsunamis generated by non-seismic sources: asteroid airburst and meteorological disturbances. Collectively, this volume highlights contemporary trends in global tsunami research, both fundamental and applied toward hazard assessment and mitigation. [ABSTRACT FROM AUTHOR]

On 17 June 2017, a landslide-generated tsunami reached the village of Nuugaatsiaq, Greenland, leaving four persons missing and presumed dead. Here, we present a preliminary high-resolution analysis of the tsunamigenic landslide scar based on three-dimensional (3D) reconstructions of oblique aerial photographs taken during a post-failure reconnaissance helicopter overflight. Through a 3D quantitative comparison with pre-failure topography, we estimate that approximately 58 million m3 of rock and colluvium (talus) was mobilized during the landslide, 45 million m3 of which reached the fjord, resulting in a destructive tsunami. We classify this event as a “tsunamigenic extremely rapid rock avalanche,” which likely released along a pre-existing metamorphic fabric, bounded laterally by slope-scale faults. Further analysis is required to properly characterize this landslide and adjacent unstable slopes, and to better understand the tsunami generation. [ABSTRACT FROM AUTHOR]

On July 10, 1958, an earthquake Mw 8.3 along the Fairweather fault triggered a major subaerial landslide into Gilbert Inlet at the head of Lituya Bay on the southern coast of Alaska. The landslide impacted the water at high speed generating a giant tsunami and the highest wave runup in recorded history. The mega-tsunami runup to an elevation of 524 m caused total forest destruction and erosion down to bedrock on a spur ridge in direct prolongation of the slide axis. A cross section of Gilbert Inlet was rebuilt at 1:675 scale in a two-dimensional physical laboratory model based on the generalized Froude similarity. A pneumatic landslide tsunami generator was used to generate a high-speed granular slide with controlled impact characteristics. State-of-the-art laser measurement techniques such as particle image velocimetry (PIV) and laser distance sensors (LDS) were applied to the decisive initial phase with landslide impact and wave generation as well as the runup on the headland. PIV provided instantaneous velocity vector fields in a large area of interest and gave insight into kinematics of wave generation and runup. The entire process of a high-speed granular landslide impact may be subdivided into two main stages: (a) Landslide impact and penetration with flow separation, cavity formation and wave generation, and (b) air cavity collapse with landslide run-out and debris detrainment causing massive phase mixing. Formation of a large air cavity — similar to an asteroid impact — in the back of the landslide is highlighted. A three-dimenional pneumatic landslide tsunami generator was designed, constructed and successfully deployed in the tsunami wave basin at OSU. The Lituya Bay landslide was reproduced in a three-dimensional physical model at 1:400 scale. The landslide surface velocities distribution was measured with PIV. The measured tsunami amplitude and runup heights serve as benchmark for analytical and numerical models. [ABSTRACT FROM AUTHOR]