Search

To accomplish various and efficient inhibitions of coal spontaneous combustion (CSC) and solve the safety hazards of CSC encountered in the production and operation of coal mining enterprises, inhibitors play an important role in the prevention and management of CSC. Herein, we report quercetin, which is selection as an antioxidant to prepare a composite solid lipid inhibitor. The concentration of the composite solid lipid inhibitor with the best inhibition effect on the active groups is selected by Fourier pressure infrared experiments, the change pattern of gas content and characteristic temperature released from coal samples during an oxidation process warming process was tested by using a programmed warming test system and simultaneous thermal analysis experiments, and finally, the inhibitory rate and combustion characteristic index were calculated. The results of the research showed that 10 mass% of quercetin had the most impact on the various groups, the highest inhibitor rate of the composite solid lipid inhibitor is 80.67% in the coal low-temperature oxidation process, compared to the raw coal, the heat release of coal treated with the composite solid lipid inhibitor was decreased by 507.65 J g−1, the maximum amount of heat emitted was lowered by 60%, and the flammability index was reduced by 56.4. A composite solid lipid inhibitor containing quercetin developed in this paper indicated high effectiveness in inhibiting CSC, which is vital for coping with the safety management of coal mine production. [ABSTRACT FROM AUTHOR]

In the present work, face sheet/core debonding failure in the plastic forming of aluminum foam sandwich panel (AFSP) was numerically investigated. The mechanism of debonding failure during the forming process was analyzed first, and then, the bilinear cohesive zone model (CZM) was introduced to simulate the damage and the failure of adhesive layer, and the detailed parameters of CZM were characterized on the basis of the experiments and simulations of flatwise tensile and lap shear of AFSP. Extensive simulations on the plastic forming of spherical and saddle-shaped AFSPs were performed with a macroscopic equivalent AFSP model to gain further insight into the debonding behavior, and multi-point forming experiments were carried out and the deformed parts were scanned using X-ray to verify the face sheet/core debonding predictions using CZM. Furthermore, the effect of cohesive properties on face sheet/core debonding failure was researched, and the results reveal that debonding failure can be avoided by decreasing the initial stiffness of adhesive and increasing the maximum traction and the critical fracture energy of adhesive. [ABSTRACT FROM AUTHOR]

This paper deals with the numerical study on the plastic forming of aluminum foam sandwich panel (AFSP). Three-dimensional (3D) tetrakaidecahedral (TKD) model and cubic-spherical (CS) AFSP model on the mesoscale as well as a 3D equivalent AFSP model on the macroscale were constructed first, and then, detailed finite element (FE) simulations on plastic forming processes of AFSP were carried out to gain further insight into the deformation characteristics and the forming defects. Plastic forming experiments of cylindrical AFSPs with different target radii were performed subsequently. It is found that mesoscopic TKD and CS AFSP models reflect more specific deformation characteristics and forming defects; however, the results obtained by the CS AFSP model are closer to the experimental results in terms of the forming defects, the shape errors, and the thickness variations. Furthermore, the CS AFSP FE model using 8-node linear brick with reduced integration and hourglass control elements saves the most calculation time among the three AFSP FE models. [ABSTRACT FROM AUTHOR]