Search

Water bodies are being contaminated daily due to industrial, agricultural and domestic effluents. In the last decades, harmful organic micropollutants (OMPs) have been detected in surface and groundwater at low concentrations due to the discharge of untreated effluent in natural water bodies. As a consequence, aquatic life and public health are endangered. Unfortunately, traditional water treatment methods are ineffective in the degradation of most OMPs. In recent years, advanced oxidation processes (AOPs) techniques have received extensive attention for the mineralization of OMPs in water in order to avoid serious environmental problems. Cold atmospheric plasma discharge-based AOPs have been proven a promising technology for the degradation of non-biodegradable organic substances like OMPs. This paper reviews a wide range of cold atmospheric plasma sources with their reactor configurations used for the degradation of OMPs (such as organic dyes, pharmaceuticals, and pesticides) in wastewater. The role of plasma and treatment parameters (e.g. input power, voltage, working gas, treatment time, OMPs concentrations, etc.) on the oxidation of various OMPs are discussed. Furthermore, the degradation kinetics, intermediates compounds formed by plasma, and the synergetic effect of plasma in combination with a catalyst are also reported in this review. [ABSTRACT FROM AUTHOR]

Stormwater is one of the last major untapped urban water resources that can be exploited as an alternative water source in Australia. The information in the current Australian Guidelines for Water Recycling relating to stormwater harvesting and reuse only emphasises on a limited number of stormwater quality parameters. In order to supply stormwater as a source for higher value end-uses, a more comprehensive assessment on the potential public health risks has to be undertaken. Owing to the stochastic variations in rainfall, catchment hydrology and also the types of non-point pollution sources that can provide contaminants relating to different anthropogenic activities and catchment land uses, the characterisation of public health risks in stormwater is complex, tedious and not always possible through the conventional detection and analytical methods. In this study, a holistic approach was undertaken to assess the potential public health risks in urban stormwater samples from a medium-density residential catchment. A combined chemical-toxicological assessment was used to characterise the potential health risks arising from chemical contaminants, while a combination of standard culture methods and quantitative polymerase chain reaction (qPCR) methods was used for detection and quantification of faecal indicator bacteria (FIB) and pathogens in urban stormwater. Results showed that the concentration of chemical contaminants and associated toxicity were relatively low when benchmarked against other alternative water sources such as recycled wastewater. However, the concentrations of heavy metals particularly cadmium and lead have exceeded the Australian guideline values, indicating potential public health risks. Also, high numbers of FIB were detected in urban stormwater samples obtained from wet weather events. In addition, qPCR detection of human-related pathogens suggested there are frequent sewage ingressions into the urban stormwater runoff during wet weather events. Further water quality monitoring study will be conducted at different contrasting urban catchments in order to undertake a more comprehensive public health risk assessment for urban stormwater. [ABSTRACT FROM AUTHOR]

In this paper, we present pilot-scale solar Photo-Fenton and TiO2 treatment of a model compound (α-methylphenylglycine) dissolved in 500 mg/l concentration in water. Not only contaminant disappearance and mineralisation were evaluated, but also enhancement of biodegradability. The solar photoreactors, composed of 4.16 m2 of compound parabolic collectors, had a total volume of 82 l (44.6 l illuminated). Treatment was successful with both Advanced Oxidation Processes (AOPs) tested, but photo-Fenton was shown to be by far more efficient from the kinetic and practical point of view. To find out the conditions for biocompatibility using the AOPs as a pre-treatment, waste water after certain degradation time, unacclimated municipal sludge and mineral nutrients were placed together and evaluated by the Zahn–Wellens (Z-W) test. Biodegradability was enhanced (70% biodegradable) by both AOPs, but photo-Fenton was demonstrated to be more efficient, requiring a treatment time one order of magnitude shorter than TiO2. Hydrogen peroxide management for reduced consumption and elimination prior to discharging water to the biotreatment step is also discussed in detail. [ABSTRACT FROM AUTHOR]