Search

Susceptibility of airborne ultrasonic power to augment heat and mass transfer during hot air dehydration of peppermint leaves was investigated in the present study. To predict the moisture removal curves, a unique non-equilibrium mathematical model was developed. For the samples dried at temperatures of 40‒70 °C and the power intensities of 0‒104 kW m−3, the diffusion of moisture inside the leaves and coefficients for of mass and heat transfer varied from 0.601 × 10–4 to 5.937 × 10–4 s−1, 4.693 × 10–4 to 7.975 × 10–4 m s−1 and 49.2 to 78.1 W m−2 K−1, respectively. In general, at the process temperatures up to 60 °C, all the studied transfer parameters were augmented in the presence of ultrasonic power. [ABSTRACT FROM AUTHOR]

The current study proposes a novel approach for assessing the effect of storage on potato tuber texture using biospeckle imaging. Agria potato tubers were subjected to biospeckle imaging using three low-power laser diodes and mechanical reference tests including uniaxial compression and creep tests for 6 months. The speckle activity indices of features such as inertia moment, absolute value of differences, autocorrelation function, and energy of wavelet transform were computed from the images. Mechanical and rheological properties were also measured using mechanical tests. An adaptive neuro-fuzzy inference system (ANFIS) coupled with the genetic algorithm was employed to develop models for predicting mechanical properties. The models for retarded compliance, maximum force, and retarded viscosity, with correlation coefficients of 0.812, 0.773, and 0.750, provided the best results. These findings can be used to non-invasively predict the mechanical properties of potatoes. The study demonstrates the potential of biospeckle imaging in assessing the texture of potato tubers during storage. [ABSTRACT FROM AUTHOR]

In this study, coupled mechanical-biospeckle imaging method was performed on potato tubers subjected to creep and uniaxial compression tests. Using this method, we analyzed the characteristics of biospeckle images in relation to the structural changes of potato tissue on loading. During mechanical tests, the speckle pattern images were recorded. The biospeckle activity indices including entropy of the wavelet transform, contrast of successive correlations (CSC), inertia moment, and absolute value of differences were calculated to extract features from the captured videos. The results revealed that the entropy could be an acceptable parameter to assess structural changes and locate rupture point of tuber in the compression test. Analysis of the biospeckle images also showed that the CSC has a decreasing trend during the creep test. Prediction models of mechanical properties were developed by fuzzy c-means clustering algorithm and were optimized using the ANFIS and genetic algorithm. The results can provide the confidence to use this method in drying, frying, and all processes that cannot be taken out samples of it. [ABSTRACT FROM AUTHOR]

The aim of this study was to analyse input-output energy and economical assessment of almond production in three age groups of orchards (group I 6-10, group II 11-15 and group III 16-20 years old) in Chahrmahal-Va-Bakhtiari province, Iran. Data for almond production were collected by administering questionnaire in face-to-face interviews from the orchards selected based on random sampling method during a 3-year period. The results showed that 57,027.13, 60,341.14 and 61,640.43 MJ ha energy was consumed by group I, group II and group III, respectively. The most energy input was consumed by electricity, followed by chemical fertilizer. Energy indices were calculated, and the results revealed that energy efficiency was 0.62, 1.12 and 0.81 in the triple groups of orchards, respectively. Economical assessment showed that total production cost of almond in group I, II and III was $4547.54, $5799.26 and $5687.05 ha, respectively. In all orchard groups, the shares of variable and fixed production costs found to be same nearly. Net return for almond production was $14,516.22, $30,735.19 and $21,395.57ha, respectively. According to the research results, it was concluded that although almond production in the study region was not an efficient process in terms of energy consumption, it was a profitable agricultural operation. [ABSTRACT FROM AUTHOR]

An accurate understanding of moisture transfer parameters, including moisture diffusivity and moisture transfer coefficient, is essential for efficient mass transfer analysis and to design new dryers or improve existing drying equipments. The main objective of the present study was to carry out an experimental and theoretical investigation of mushroom slices drying and determine the mass transfer characteristics of the samples dried under different conditions. The mushroom slices with two thicknesses of 3 and 5 mm were dried at air temperatures of 40, 50 and 60 °C and air flow rates of 1 and 1.5 m s. The Dincer and Dost model was used to determine the moisture transfer parameters and predict the drying curves. It was observed that the entire drying process took place in the falling drying rate period. The obtained lag factor and Biot number indicated that the moisture transfer in the samples was controlled by both internal and external resistance. The effective moisture diffusivity and the moisture transfer coefficient increased with increasing air temperature, air flow rate and samples thickness and varied in the ranges of 6.5175 × 10 to 1.6726 × 10 m s and 2.7715 × 10 to 3.5512 × 10 m s, respectively. The validation of the Dincer and Dost model indicated a good capability of the model to describe the drying curves of the mushroom slices. [ABSTRACT FROM AUTHOR]

In this study, the effect of drying temperature on drying behaviour and mass transfer parameters of lemon slices was investigated. The drying experiments were conducted in a laboratory air ventilated oven dryer at temperatures of 50, 60 and 75 °C. It was observed that the drying temperature affected the drying time and drying rate significantly. Drying rate curves revealed that the process at the temperature levels taken place in the falling rate period entirely. The usefulness of eight thin layer models to simulate the drying kinetics was evaluated and the Midilli and Kucuk model showed the best fit to experimental drying curves. The effective moisture diffusivity was determined on the basis of Fick's second law and obtained to be 1.62 × 10, 3.25 × 10 and 8.11 × 10 m s for the temperatures of 50, 60 and 75 °C, respectively. The activation energy and Arrhenius constant were calculated to be 60.08 kJ mol and 0.08511 m s, respectively. The average value of convective mass transfer coefficient for the drying temperatures of 50, 60 and 75 °C was calculated to be 5.71 × 10, 1.62 × 10 and 2.53 × 10 m s, respectively. [ABSTRACT FROM AUTHOR]

To design new dryers or improve existing drying equipments, accurate values of mass transfer parameters is of great importance. In this study, an experimental and theoretical investigation of drying whole lemons was carried out. The whole lemons were dried in a convective hot air dryer at different air temperatures (50, 60 and 75 °C) and a constant air velocity (1 m s). In theoretical consideration, three moisture transfer models including Dincer and Dost model, Bi- G correlation approach and conventional solution of Fick's second law of diffusion were used to determine moisture transfer parameters and predict dimensionless moisture content curves. The predicted results were then compared with the experimental data and the higher degree of prediction accuracy was achieved by the Dincer and Dost model. [ABSTRACT FROM AUTHOR]