Search

Prediction of pulp yield of Eucalyptus globulus wood samples based on partial least squares (PLS) regression can be optimized by utilizing specific near infrared (NIR) wavelengths. A critical feature of this approach is the weighting of constraint conditions. Equal weighting balances optimization in terms of calibration and prediction; however, there is a lack of knowledge regarding prediction performance of wood property models when different weight factors are used. In this study, pulp yield models were developed using two E. globulus data sets characterized by narrow (5%) and extreme (22.6%) yield ranges and represented by untreated and second derivative NIR spectra. The global optimization solver pySOT was used to optimize the performance of a PLS regression model in terms of wavelengths selected and number of latent variables. A linear function of R-squares for calibration ( R c 2 ) and prediction ( R p 2 ) sets was utilized as the objective function with the aim of maximizing α R c 2 + 1 - α R p 2 for all values of α between 0 (maximizing R p 2 without concern for R c 2 ) and 1 (only maximizing R c 2 ). Values of α ≤ 0.8 provided good predictive performance, whereas α ≥ 0.9 tended to overfit the calibration data indicating that models are robust for values of α from 0 to 0.8. Representative wavelengths for each data set were identified and assigned to corresponding wood components through a band assignment process. Strong agreement was observed for α ≤ 0.8 ; however, for α ≥ 0.9 , identified wavelengths generally occurred in regions unrelated to vibrations arising from specific wood components. [ABSTRACT FROM AUTHOR]

Near-infrared wavelengths selected by genetic algorithm were used to optimize partial least squares (PLS) regression models for loblolly pine (Pinus taeda L.) from the southeastern United States. Wood properties examined included density (D), microfibril angle, modulus of elasticity and tracheid coarseness (C), radial diameter (R), tangential diameter (T), and wall thickness (w)—measured by SilviScan. The optimization process was run for each property with Agenda 2020 samples utilized for PLS model development and the other sets used for prediction. The number of variables (i.e. wavelengths) varied from 10 to 100 with an optimum number identified by genetic algorithm. When compared to a full data set model (based on 700 wavelengths), calibration and prediction performance of optimized PLS regression models were superior for all properties. Importantly, representative wavelengths for each property were consistently related to recognized bond vibrations observed in specific wood components demonstrating that optimization targets wavelengths directly related to changes in wood chemistry within the examined loblolly pine samples. [ABSTRACT FROM AUTHOR]

A sustainable alternative for wood waste is turning them into structural panels since it adds value to the raw material and contributes to the sector's circular economy. Strand-based composites such as oriented strand board is a natural fit for these wood wastes. A molded core composite with sandwich geometry with trapezoidal core guarantees significant increases in the stiffness of the panel, enabling its use as structural components in civil construction. Therefore, in this study, the mechanical properties of OSB sandwich panel with trapezoidal core produced with Balsa wood (Ochroma Pyramidale) waste agglomerated with bicomponent castor oil polyurethane resin (phenol free) were evaluated. The results indicate that the panel under study presented properties in the longitudinal direction that enable its use as a structural component. [ABSTRACT FROM AUTHOR]

An optimization problem was developed by using a genetic algorithm to select wavelengths for establishing multivariate calibration models based on partial least squares (PLS) regression. Two near infrared (NIR) data sets represented by untreated and second derivative spectra were used to predict Eucalyptus globulus pulp yield. The optimization process was run with the number of variables (i.e., wavelengths) varied from 10 to 100 to determine the optimum wavelengths and number of latent variables for PLS regression model. A linear function of R-squares for calibration and prediction sets was utilized as the objective function of the optimization problem. The optimum wavelengths selected by genetic algorithm helped to considerably improve the performance of the PLS regression model, not only for the calibration sets but also for the prediction sets. The optimum number of latent variables varied over a wide range, from the maximum allowed (20) to a lower limit of six. Representative wavelengths for each data set were also statistically determined and assigned to corresponding wood components through a band assignment process, which showed strong agreement. [ABSTRACT FROM AUTHOR]