Search

Fine particulate organic matter (FPOM) is an important basal resource in stream ecosystems for deposit- and filter-feeding macroinvertebrates (collectively 'particle feeders'). Microplastics (MP) share many characteristics with FPOM (e.g. size range, surface area to volume ratios) and are potentially consumed by particle feeders. Accordingly, MP contamination of natural FPOM pools might affect particle feeder growth and survival, particularly when background FPOM resource quality is low, or intraspecific competition is high. We conducted a microcosm experiment to evaluate how a realistic (1400 particles/kg sediment) polyethylene MP (ø = 45–53 µm) concentration interacts with FPOM (ø = 63–250 µm) resource quality (low versus high nutrient content) and consumer density (10 versus 20 individuals per microcosm) to affect growth and survival of larval Chironomus riparius (Diptera: Chironomidae), a model particle feeder. We additionally quantified community respiration, based on three hour measurements of oxygen consumption in the microcosms at the end of the experiment. MP exposure reduced larval body lengths by 26.7%, but only under the low consumer density treatment. MPs reduced community respiration by 26.2%, but only in the absence of chironomids, indicating an impact on microbial respiration. In comparison, low resource quality and high consumer density were associated with 53.5–70.2% reductions in community respiration, chironomid body length and/or body mass. These results suggest that effects of contamination of FPOM with MPs at environmentally realistic concentrations on the life histories of particle feeders such as C. riparius might be limited, especially relative to the effects of resource quality and consumer density. However, the reduction in microbial respiration when MPs were present highlights the need for further research addressing MP impacts on microbes, given their key roles in ecosystem functioning. [ABSTRACT FROM AUTHOR]

Reference materials (RMs) are vital tools in the validation of methods used to detect environmental pollutants. Microplastics, a relatively new environmental pollutant, require a variety of complex approaches to address their presence in environmental samples. Both interlaboratory comparison (ILC) studies and RMs are essential to support the validation of methods used in microplastic analysis. Presented here are results of quality assurance and quality control (QA/QC) performed on two types of candidate microplastic RMs: dissolvable gelatin capsules and soda tablets. These RMs have been used to support numerous international ILC studies in recent years (2019–2022). Dissolvable capsules containing polyethylene terephthalate (PET), polyvinyl chloride (PVC), polyethylene (PE), and polystyrene (PS), in different size fractions from 50 to 1000 µm, were produced for one ILC study, obtaining relative standard deviation (RSD) from 0 to 24%. The larger size fraction allowed for manual addition of particles to the capsules, yielding 0% error and 100% recovery during QA/QC. Dissolvable capsules were replaced by soda tablets in subsequent ILC studies and recovery test exercises because they were found to be a more reliable carrier for microplastic RMs. Batches of soda tablets were produced containing different single and multiple polymer mixtures, i.e., PE, PET, PS, PVC, polypropylene (PP), and polycarbonate (PC), with RSD ranging from 8 to 21%. Lastly, soda tablets consisting of a mixture of PE, PVC, and PS (125–355 µm) were produced and used for recovery testing during pretreatment of environmental samples. These had an RSD of 9%. Results showed that soda tablets and capsules containing microplastics >50 µm could be produced with sufficient precision for internal recovery tests and external ILC studies. Further work is required to optimize this method for smaller microplastics (< 50 µm) because variation was found to be too large during QA/QC. Nevertheless, this approach represents a valuable solution addressing many of the challenges associated with validating microplastic analytical methods. [ABSTRACT FROM AUTHOR]

Improper handling of plastic waste and related chemical pollution has garnered much attention in recent years owing to the associated detrimental impacts on human health and the environment. This article reports an overview of the main interlinkages between persistent organic pollutants (POPs) and plastic in the waste management system of India. Both plastics and POPs share certain common traits such as persistence, resistance to biological degradation, and the ability to get transported over long distances. Throughout the processes of production, consumption, and disposal, plastics interact with and accumulate POPs through several mechanisms and end up co-existing in the environment. Plastic waste can undergo long-range transport through rivers and the oceans, break down into microplastics and get transported through the air, or remain locked in waste dump yards and landfills. Over time, environmental processes lead to the leaching and release of accumulated POPs from these plastic wastes. Plastic recycling in the Indian informal sector including smelting, scrubbing, and shredding of plastic waste, is also a potential major POPs source that demands further investigation. The presence of POPs in plastic waste and their fate in the plastic recycling process have not yet been elucidated. By enhancing our understanding of these processes, this paper may aid policy decisions to combat the release of POPs from different waste types and processes in India. [ABSTRACT FROM AUTHOR]

Microplastics have been detected in lake environments globally, including in remote regions. Agricultural and populated areas are known to congregate several inputs and release pathways for microplastic. This study investigated microplastic (50–5000 µm) contamination in five Danish freshwater lakes with catchments dominated by arable land use. The concentrations in sediments (n = 3/site) and the zebra mussel, Dreissena polymorpha (n = 30/site), were calculated and compared with catchment characteristics and environmental parameters. Microplastic concentrations in sediment were relatively low (average 0.028 ± 0.017 items/g dry weight sediment) whilst only a single microplastic was found in the mussels (average 0.067 ± 0.249 items/10 individual). Hence, no relationship between the number of observed microplastics in sediment and mussels could be identified, nor could a relationship between concentration in sediment and environmental parameters. As all lakes studied received their water from moderate to heavily anthropogenically impacted catchments, it was expected that they would be sinks for microplastic with high bioavailability. Based on the results of the present study, D. polymorpha were found to not be contaminated by microplastics in the five study lakes. Thus, our results suggest that these mussels do not interact with microplastics at low concentrations. We speculate that the results on sediment and biota could be explained by several factors related to regional differences in plastic use, species characteristics, sampling size, and the fact that finding no microplastic is not always reported in the scientific literature. Thus, the paper provides insight into the dynamics between the catchment, lake, and biota in systems with low microplastic concentration. [ABSTRACT FROM AUTHOR]

Purpose: BRCA1 or BRCA2 mutated cancers (BRCAmut) have intrinsic sensitivity to PARP inhibitors due to deficiency in homologous recombination-mediated DNA repair. There are similarities between BRCAmut and BRCAwt ovarian and basal-like breast cancers. This phase I study determined the recommended phase II dose (RP2D) and preliminary efficacy of the PARP inhibitor, veliparib (ABT-888), in these patients. Patients and methods: Patients (n = 98) were dosed with veliparib 50–500 mg twice daily (BID). The BRCAmut cohort (n = 70) contained predominantly ovarian (53%) and breast (23%) cancers; the BRCAwt cohort (n = 28) consisted primarily of breast cancer (86%). The MTD, DLT, adverse events, PK, PD, and clinical response were assessed. Results: DLTs were grade 3 nausea/vomiting at 400 mg BID in a BRCAmut carrier, grade 2 seizure at 400 mg BID in a patient with BRCAwt cancer, and grade 2 seizure at 500 mg BID in a BRCAmut carrier. Common toxicities included nausea (65%), fatigue (45%), and lymphopenia (38%). Grade 3/4 toxicities were rare (highest lymphopenia at 15%). Overall response rate (ORR) was 23% (95% CI 13–35%) in BRCAmut overall, and 37% (95% CI 21–55%) at 400 mg BID and above. In BRCAwt, ORR was 8% (95% CI 1–26%), and clinical benefit rate was 16% (95% CI 4–36%), reflecting prolonged stable disease in some patients. PK was linear with dose and was correlated with response and nausea. Conclusions: Continuous veliparib is safe and tolerable. The RP2D was 400 mg BID. There is evidence of clinical activity of veliparib in patients with BRCAmut and BRCAwt cancers. [ABSTRACT FROM AUTHOR]

Repeated measures studies are frequently performed in patient-derived xenograft (PDX) models to evaluate drug activity or compare effectiveness of cancer treatment regimens. Linear mixed effects regression models were used to perform statistical modeling of tumor growth data. Biologically plausible structures for the covariation between repeated tumor burden measurements are explained. Graphical, tabular, and information criteria tools useful for choosing the mean model functional form and covariation structure are demonstrated in a Case Study of five PDX models comparing cancer treatments. Power calculations were performed via simulation. Linear mixed effects regression models applied to the natural log scale were shown to describe the observed data well. A straight growth function fit well for two PDX models. Three PDX models required quadratic or cubic polynomial (time squared or cubed) terms to describe delayed tumor regression or initial tumor growth followed by regression. Spatial(power), spatial(power) + RE, and RE covariance structures were found to be reasonable. Statistical power is shown as a function of sample size for different levels of variation. Linear mixed effects regression models provide a unified and flexible framework for analysis of PDX repeated measures data, use all available data, and allow estimation of tumor doubling time. [ABSTRACT FROM AUTHOR]

Purpose: Manchester is often heralded as the first industrial city. Large volumes of physical and liquid contaminants were released into its river network throughout the industrial period up to the latter part of the twentieth century. Water quality has improved dramatically in recent decades, but, given their environmental significance, it is important to ascertain the extent to which a legacy of contamination persists in the modern bed sediments. Materials and methods: Fine-grained bed sediments were sampled at 40 sites in the Mersey and Irwell catchments. Sediments were wet sieved to isolate the <63-μm grain size fraction. Metal concentrations were determined using XRF. Particle size characteristics were also measured. Sediments were subjected to a five-step sequential extraction procedure to ascertain the environmental significance of metal concentrations. Alongside archival research of past industry, enrichment factors, multivariate statistical techniques and conditional inferences trees were used to identify sources of heavy metals. Results and discussion: Bed sediment-associated heavy metal(loid) concentrations were as follows: As (9.89-110 mg kg), Cr (76.5-413 mg kg), Cu (53.1-383 mg kg), Pb (80.4-442 mg kg) and Zn (282-1020 mg kg). Enrichment factors ranged from moderate to extremely severe, with Pb showing the greatest enrichment across the catchments. Chemical mobility was generally low, but metal(loid) partitioning identified the influence of anthropogenic sources. Statistical analysis highlighted a number of point sources associated with former industrial sites that operated during the industrial period. Conditional inference trees highlighted the role of the textile industry on Cu concentrations in addition to indicating the complexity of sources, fluxes and stores of sediment-associated contamination throughout the system. Conclusions: Fine-grained sediment-associated metal(loid)s in the Mersey and Irwell catchments are anthropogenically enriched. Concentrations also exceed sediment quality guidelines. A lack of distinct spatial patterning points to a complex network of contaminant inputs across the catchments, even in the headwaters. Whilst potential modern urban sources are likely to be important, spatial patterns and multivariate/data mining techniques also highlighted the importance of releases from former industrial sites as well as the reworking of historically contaminated floodplains and soils. [ABSTRACT FROM AUTHOR]