Search

New means to improve spectral efficiency and flexibility in radio spectrum use are in high demand due to congestion of the available spectral resources. Systems deploying inband full-duplex transmission aim at providing higher spectral efficiency by concurrent transmission and reception at the same frequency. Potentially doubling system throughput, full-duplex communications is considered as an enabler technology for the upcoming 5G networks. However, system performance is degraded due to the strong self-interference (SI) caused by overlapping of high power transmit signal with the received signal of interest. Furthermore, due to commonly existing radio frequency imperfections, advanced techniques capable of mitigating nonlinear SI are required. This article presents a real-time software-defined implementation of a digital SI canceller for full-duplex transceivers, potentially applicable even in mobile-scale devices. Recently, software-defined radio has gained a lot of interest due to its higher flexibility, scalability, and shorter time-to-market cycles compared to traditional fixed-function hardware designs. Moreover, as the performance enhancements achieved by increasing the clock frequency is reaching its limits, the current trend is towards multi-core processors. Since contemporary mobile phones already contain powerful massively parallel GPUs and CPUs, feasibility of a real-time implementation on mobile processors is studied. The reported results show that by adopting the presented solution, it is possible to achieve sufficient SI cancellation under time varying coupling channel conditions. Additionally, the possibility of carrying out such advanced processing in a real-time fashion on the selected platforms is investigated, and the implementation is evaluated in terms of execution time, power, and energy consumption. [ABSTRACT FROM AUTHOR]

This paper presents a novel digital self-interference canceller for an inband multiple-input-multiple-output (MIMO) full-duplex radio. The signal model utilized by the canceller is capable of modeling the in-phase quadrature (IQ) imbalance, the nonlinearity of the transmitter power amplifier, and the crosstalk between the transmitters, thereby being the most comprehensive signal model presented thus far within the full-duplex literature. Furthermore, it is also shown to be valid for various different radio frequency (RF) cancellation solutions. In addition to this, a novel complexity reduction scheme for the digital canceller is also presented. It is based on the widely known principal component analysis, which is used to generate a transformation matrix for controlling the number of parameters in the canceller. Extensive waveform simulations are then carried out, and the obtained results confirm the high performance of the proposed digital canceller under various circuit imperfections. The complexity reduction scheme is also shown to be capable of removing up to 65% of the parameters in the digital canceller, thereby significantly reducing its computational requirements. [ABSTRACT FROM AUTHOR]

When developing advanced location-based systems augmented with audio ambiances, it would be cost-effective to use a few representative samples from typical environments for describing a larger number of similar locations. The aim of this experiment was to study the human ability to discriminate audio ambiances recorded in similar locations of the same urban environment. A listening experiment consisting of material from three different environments and nine different locations was carried out with nineteen subjects to study the credibility of audio representations for certain environments which would diminish the need for collecting huge audio databases. The first goal was to study to what degree humans are able to recognize whether the recording has been made in an indicated location or in another similar location, when presented with the name of the place, location on a map, and the associated audio ambiance. The second goal was to study whether the ability to discriminate audio ambiances from different locations is affected by a visual cue, by presenting additional information in form of a photograph of the suggested location. The results indicate that audio ambiances from similar urban areas of the same city differ enough so that it is not acceptable to use a single recording as ambience to represent different yet similar locations. Including an image was found to increase the perceived credibility of all the audio samples in representing a certain location. The results suggest that developers of audio-augmented location-based systems should aim at using audio samples recorded on-site for each location in order to achieve a credible impression. [ABSTRACT FROM AUTHOR]