Search

Pharmaceuticals and personal care products (PPCPs) have been increasingly used all over the world and they have been reported on water cycle and cause contamination. Among these pharmaceuticals is caffeine (CAF). In this work, CAF removal from aqueous samples by metal–organic framework (UIO-66) and perovskite (La0.7Sr0.3FeO3) was achieved. Detailed studies on the preparation of MOFs and perovskite oxides compounds have been presented. Extensive characterizations such as X-Ray diffraction (XRD), field emission scanning electron microscope (FESEM), Fourier transform infrared spectra (FT-IR), N2 adsorption–desorption isotherms were also carried out to assure proper formation and to better understand the physico-chemical behavior of the synthesized samples before and after adsorption. Batch experiments of CAF adsorption onto both MOFs and perovskite were performed to compare the effectiveness of both materials on the removal competence of the CAF residue at different conditions including the effect of pH, initial concentration, and contact time. It was observed that the adsorption capacity of CAF by MOF increased with increasing acidity. On the other hand, the adsorption capacity of perovskite is stable in pH 4–10. The maximum adsorption capacities of UiO-66 and perovskite toward CAF are high as 62.5 mg g−1 and 35.25 mg g−1, respectively. Equilibrium isotherms were investigated by numerous models: Langmuir, Freundlich, Temkin, Redlich-Peterson, Sips, Langmuir-Freundlich, Toth, Kahn, Baudu, and Fritz Schlunder. Moreover, the kinetics of the CAF@MOF and CAF@Perovskite systems have been studied by five kinetic models (Pseudo-1st -order (PFO), Pseudo-2nd -order (PSO), Mixed 1st, 2nd-order, Intraparticle diffusion and Avrami). The best model described the adsorption of CAF onto both of MOF and perovskite was the mixed 1st, 2nd-order model. The metal–organic framework and perovskite were applied to quickly extract CAF from water samples successfully. The maximum removal percentage obtained for MOF and perovskite was 0.89% and 0.94% respectively within 30 min contact time which suggests that these materials are considered as promising adsorbents for CAF. [ABSTRACT FROM AUTHOR]

Industrial by-products; have received a lot of attention as a possible precursor for cement and/or concrete production for a more environmentally and economically sound use of raw materials and energy sources. Geopolymer is a potentially useful porous material for OPC binder applications. The use of industrial wastes to produce a greener geopolymer is one area of fascinating research. In this work, geopolymer pastes were developed using alkali liquid as an activator and metakaolin (MK), alumina powder (AP), silica fume (SF), and cement kin dust (CKD) as industrial by-products. Several geopolymer samples have been developed. Research has been carried out on its processing and related physical and mechanical properties through deep microstructure investigation. The samples were cured in water by immersion with relative humidity (95 ± 5%), and at room temperature (~ 19–23 °C) prior to being tested for its workability and durability. The effect of the different composition of precursors on water absorption, density, porosity, and the compressive strength of the prepared geopolymers have been investigated. The results showed that the compressive strength of geopolymers at 28 days of curing is directly proportional to the ratio of the alkali liquid. Ultimately, the best geopolymer paste mixture (GPD1 and GPD2), was confirmed to contain (15% of CKD + 85% MK and Alumina solution (55 wt%)) and (25% of CKD + 75% MK + Alumina solution (55 wt%)) respectively, with 73% desirability for maximum water absorption (~ 44%) and compressive strength (4.9 MPa). [ABSTRACT FROM AUTHOR]

Rhyolite rocks extend from southern Egypt to northern Egypt in the Eastern Desert, and no effective economic exploitation of them has been discovered so far. The pozzolanic activities of different volcanic tuffs (VT) supplied from the Eastern Desert located in Egypt have been investigated as natural volcanic pozzolan materials to develop new green cementitious materials for achieving sustainability goals in the construction field. Experimentally in this paper, the pozzolanic activities of seven diverse specimens of Egyptian tuffs taken with standardized proportions of 75:25% (Cement: volcanic tuffs) were investigated. Pozzolanic features of such tuffs are examined comparatively via strength activity index (SAI), TGA, DTA, and the Frattini's test. Chemical composition, petrographic, and XRD analysis were also performed for tuffs samples. The pozzolanic reaction degrees were determined according to the compressive strengths at 7, 28, 60 and 90 days with different replacement ratios (20, 25, 30 and 40%) of tuffs samples. Additionally, the micro-filler effects in mortar and concrete were determined by measuring the heat of hydration in mortar samples and the compressive strength of concrete with different additive ratios for tuffs samples besides, the concrete slump test. The results show that TF6 gives a lower cement heat of hydration value which is less than 270 J/g at 7 days. Also, its performance in concrete is better than silica fume at late strength (28 days) since the concrete index value is 106.2% by compared to the concrete index of silica fume 103.9 and therefore it can be used as an alternative to high price and quality variable silica fume (SF) for producing high-performance green concrete. Due to the good pozzolanic behavior proved by nearly most volcanic tuffs, along with their low cost, this study will be profitable for very auspicious the use of Egyptian volcanic tuffs for developing sustainable and eco‑friendly blended cement. [ABSTRACT FROM AUTHOR]

Urea is recognized as one of the most frequently used adulterants in milk to enhance artificial protein content, and whiteness. Drinking milk having high urea concentrations which causes innumerable health disputes like ulcers, indigestion, and kidney-related problems. Therefore, herein, a simple and rapid electroanalytical platform was developed to detect the presence of urea in milk using a modified electrode sensor. Calcium oxide nanoparticles (CaO NPs) were green synthesized and used as a catalyst material for developing the sensor. Synthesized materials formation was confirmed by different techniques like FTIR, UV–visible, XRD, SEM–EDX, and Raman spectroscopy. The carbon paste electrode (CPE) was modified using the CaO NPs and used as a working electrode during the analysis followed by cyclic voltammetry and differential pulse voltammetry (DPV) techniques. The fabricated calcium oxide modified carbon paste electrode (CaO/CPE) successfully detected the presence of urea in the lower concentration range (lower limit of detection (LLOD) = 0.032 µM) having a wide linear detection range of 10–150 µM. Adsorption-controlled electrode process was achieved at the scan rate variation parameter. The leading parameters like the selectivity, repeatability, and stability of the CaO/CPE were investigated. The relative standard deviation of sensor was ± 3.8% during the interference and stability study. [ABSTRACT FROM AUTHOR]