Search

In this work, the gas forming of AZ31 magnesium alloy 0.75-mm-thick sheets at elevated strain rates (fast gas forming) is investigated through an experimental-numerical approach. First, free inflation tests were carried out to find the conditions, in terms of temperature and forming pressure, able to give the best compromise between the alloy formability and the forming time. The analysis was successively moved to a closed die forming application with a stepped geometry case study in order to analyse the real forming process. Both an axisymmetric model of the free inflation test and a 3D model of the closed die forming process were built to correlate the results from free inflation tests (in terms of optimal strain rate values) to the closed die forming test: Numerical simulations were run to find the pressure value to be applied in gas forming tests. Experimental gas forming trials were finally conducted in order to support the approach and to analyse post-forming characteristics of the formed parts. Results showed that very small fillet radii can be reached on a commercial Mg alloy sheet setting very short forming times (few seconds). The choice of the forming temperature and of the corresponding optimal strain rate strongly affects the grain growth and the cavitation phenomena. Even if the alloy is prone to a strong static and dynamic grain growth at elevated temperatures, a small mean grain size value can be reached in the formed component due to the short forming times. [ABSTRACT FROM AUTHOR]

In this work, the mechanical and technological behaviour of AZ31 magnesium alloy laser welded joints is investigated. The forming behaviour of the joints is analysed by both tensile and biaxial stretch tests. Each test is monitored using a digital image correlation system in order to acquire the complete strain field during the whole test. Both in tensile and biaxial stretching tests, the strain maps reveal that the weld bead makes the strain path experienced by the welded specimen more critical than the one experienced by the base material, and this can be related to morphological defects of the weld bead. [ABSTRACT FROM AUTHOR]

The single-pulse laser hardening of a hypereutectoid steel coated by a graphite layer was investigated using a numerical/experimental approach. Experimental tests were conducted on coated samples using a fibre laser source and without any gas shielding aiming to explore the effect of laser power, pulse energy and defocusing distance on the dimensions of the hardened region. The process operating window of the discrete spot laser hardening using the graphite layer was determined through a finite element model and compared with previous results obtained on uncoated samples. For the same laser power and interaction times, an enlargement of the hardened region was found when using the graphite coating, especially when operating at the lowest laser energy level. The process operating window remains similar in shape to the one of the uncoated steel but moves towards larger hardened diameters and much larger defocusing distances. Once the maximum temperature has been fixed, a linear relationship between the hardened diameter and the defocusing distance exists. No obvious surface oxidation occurs since the graphite coating acts as a protective layer. [ABSTRACT FROM AUTHOR]