Search

Water disinfection is conventionally achieved by oxidation or irradiation, which is often associated with a high carbon footprint and the formation of toxic byproducts. Here, we describe a nano-structured material that is highly effective at killing bacteria in water through a hydrodynamic mechanism. The material consists of carbon-coated, sharp Cu(OH)2 nanowires grown on a copper foam substrate. We show that mild water flow (e.g. driven from a storage tank) can efficiently tear up bacteria through a high dispersion force between the nanotip surface and the cell envelope. Bacterial cell rupture is due to tearing of the cell envelope rather than collisions. This mechanism produces rapid inactivation of bacteria in water, and achieved complete disinfection in a 30-day field test. Our approach exploits fluidic energy and does not require additional energy supply, thus offering an efficient and low-cost system that could potentially be incorporated in water treatment processes in wastewater facilities and rural communities. Common methods for water disinfection involve oxidation or irradiation, and are often associated with a high carbon footprint and formation of toxic byproducts. Here, the authors describe a nano-structured material that is highly effective at killing bacteria in water through a hydrodynamic mechanism driven by mild water flow, in the absence of additional energy supply. [ABSTRACT FROM AUTHOR]

In this work, LED-based photocatalysis using mixed rutile and anatase phase TiO2 (P25) as the photocatalyst could effectively remove 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT) and methylisothiazolone (MIT) simultaneously, with removal efficiencies above 80% within 20 min. The photocatalytic degradation of both CMIT and MIT could be modeled using a pseudo-first-order rate equation. The photocatalytic degradation rates of CMIT and MIT under LED280 illumination were higher than under LED310 or LED360 illumination. At concentrations below 100 mg/L, the degradation rate of CMIT and MIT under LED illumination significantly increased with increasing catalyst dosage. Additionally, the effects of the chloride ion concentration, alkalinity and dissolved organic matter on the photocatalytic degradation reaction were also investigated. The ·OH free radicals were determined to play the primary role in the photocatalytic degradation reaction, with a degradation contribution of >95%. The photocatalytic degradation of CMIT and MIT mainly occurred via oxidation, hydrolysis, and chain growth reactions. Finally, the possible photocatalytic degradation pathways of CMIT and MIT over LED/P25 are proposed. [ABSTRACT FROM AUTHOR]

Cryptosporidium and Giardia are two typical species of pathogenic protozoans that seriously endanger water quality. Previous works indicated that detection of Cryptosporidium and Giardia with modified United States Environmental Protection Agency (USEPA) method-1623 using a membrane filtration-elution for sample concentration attained better recovery and lower cost compared to the USEPA method-1623. Several improvements of membrane filtration-elution step as well as immunomagnetic separation (IMS) steps were investigated and an optimized method for detection of Cryptosporidium and Giardia in wastewater reclamation system was recommended in this paper. The experimental results show that an overnight soak of the membrane after scraping and vortex agitation before elution could enhance and stabilize the recovery. Increasing turbidity to 4 NTU by adding kaolin clay before filtration could effectively improve the recovery of low-turbidity water. Washing the concentrate after centrifugation and twice acid dissociation both reduced the impact of water quality to protozoan recovery. Protozoans in different water samples were determined by this optimized method, and the recovery of Cryptosporidium and Giardia were above 70% and 80% respectively, much higher than the acceptance of method-1623. [ABSTRACT FROM AUTHOR]

Seven strains that can degrade nitrobenzene at low temperature were isolated from the sediments of a nitrobenzene-polluted river. One of the strains, NB-1, can mineralize 20 mg/L nitrobenzene completely from 2.5 to 35°C with an optimum temperature of 25°C. NB-1 was identified as Pseudomonas putida according to its morphology, biochemical properties, and 16S rDNA sequence analysis. The strain could tolerate and degrade 120 mg/L nitrobenzene within 175 h at 5°C. It can be used for the bioremediation of nitrobenzene-contaminated environment. [ABSTRACT FROM AUTHOR]