Search

Antarctica harbors a microbial diversity still poorly explored and of inestimable biotechnological value. Cold-adapted microorganisms can produce a diverse range of metabolites stable at low temperatures, making these compounds industrially interesting for biotechnological use. The present work investigated the biotechnological potential for antimicrobial and antitumor activity of filamentous fungi and bacteria isolated from marine sediment samples collected at Deception Island, Antarctica. A total of 89 microbial isolates were recovered from marine sediments and submitted to an initial screening for l-glutaminase with antitumoral activity and for antimicrobial metabolites. The isolates Pseudogymnoascus sp. FDG01, Pseudogymnoascus sp. FDG02, and Penicillium sp. FAD33 showed potential antiproliferative action against human pancreatic carcinoma cells while showing no toxic effect on non-tumor cells. The microbial extracts from unidentified three bacteria and four filamentous fungi showed antibacterial activity against at least one tested pathogenic bacterial strain. The isolate FDG01 inhibited four bacterial species, while the isolate FDG01 was active against Micrococcus luteus in the minimal inhibitory concentration of 0.015625 μg mL −1. The results pave the way for further optimization of enzyme production and characterization of enzymes and metabolites found and reaffirm Antarctic marine environments as a wealthy source of compounds potentially applicable in the healthcare and pharmaceutical industry. [ABSTRACT FROM AUTHOR]

The use of biofuels has grown in the last decades as a consequence of the direct environmental impacts of fossil fuel use. Elucidating structure, diversity, species interactions, and assembly mechanisms of microbiomes is crucial for understanding the influence of environmental disturbances. However, little is known about how contamination with biofuel/petrofuel blends alters the soil microbiome. Here, we studied the dynamics in the soil microbiome structure and composition of four field areas under long-term contamination with biofuel/fossil fuel blends (ethanol 10% and gasoline 90%—E10; ethanol 25% and gasoline 75%—E25; soybean biodiesel 20% and diesel 80%—B20) submitted to different bioremediation treatments along a temporal gradient. Soil microbiomes from biodiesel-polluted areas exhibited higher richness and diversity index values and more complex microbial communities than ethanol-polluted areas. Additionally, monitored natural attenuation B20-polluted areas were less affected by perturbations caused by bioremediation treatments. As a consequence, once biostimulation was applied, the degradation was slower compared with areas previously actively treated. In soils with low diversity and richness, the impact of bioremediation treatments on the microbiomes was greater, and as a result, the hydrocarbon degradation extent was higher. The network analysis showed that all abundant keystone taxa corresponded to well-known degraders, suggesting that the abundant species are core targets for biostimulation in soil remediation processes. Altogether, these findings showed that the knowledge gained through the study of microbiomes in contaminated areas may help design and conduct optimized bioremediation approaches, paving the way for future rationalized and efficient pollutant mitigation strategies. [ABSTRACT FROM AUTHOR]

The adhesion of coating mortars is influenced by various factors, with the roughness of the substrates being particularly important. Surface roughness encompasses irregularities, including peaks and valleys, which can impact the adhesive properties between the cementitious matrix and the substrate. This study quantitatively analyses the roughness, topography, and interface area influence between ceramic substrates and cementitious coating on tensile bond strength. A single type of paste was applied to 400 surfaces of clay hollow blocks with varying roughness levels. The ceramic substrates were characterized using 3D laser profilometry to assess roughness. The study’s findings reveal crucial insights into average tensile bond strengths concerning specific roughness parameters, notably average valley area (AVA) and average valley height (AHV). It was observed that deeper valleys necessitated broader lake expansions for optimum adhesion. Remarkably improved average tensile bond strength was achieved at AHV values ranging from 2.16 to 2.78 µm and at 0.98 µm, beginning from an AVA of 0.19 mm2. Furthermore, even at an AVA of 0.07 mm2, a notable increase in adhesion was observed. In conclusion, this study highlights the profound influence of roughness parameters, AVA and AHV, on the adhesion between clay hollow blocks and cementitious matrices. The comprehensive analysis of surface roughness and its impact on adhesion provides valuable insights for optimizing coating mortar applications in construction and engineering practices. [ABSTRACT FROM AUTHOR]

Antarctica has a great diversity of microorganisms with biotechnological potential but is not very well Known about yeasts with phosphate solubilization activity. Thus, the aim of this study was to evaluate the ability of yeasts from Antarctica lichens to solubilize phosphate in vitro. In the screening, 147 yeasts were tested and 43 (29%) showed P solubilization in solid NBRIP medium at 15.0 °C, with a higher prevalence of positive genera Vishniacozyma, followed by Cystobasidium. Most of the positive yeasts were isolated from Usnea auratiacoatra, followed by Polycauliona regalis and Lecania brialmontii. Two strains with better activity after screening were selected for the solubilization in the liquid medium, Vishniacozyma victoriae 2.L15 and A.L6 (unidentified). Vishniacozyma victoriae 2.L15 exhibiting activities at 25.0 °C (29.91 mg/L of phosphate and pH 6.85) and at 30.0 °C (619.04 mg/L of phosphate and pH 3.73) and A.L6 strain at 25.0 °C (25.05 mg/L of phosphate and pH 6.69) and at 30.0 °C (31.25 mg/L of phosphate and pH 6.47). Of eight organic acids tested by HPLC, tartaric and acetic acids were detected during phosphate solubilization, with greater release in the period of 144 (2.13 mg/L) and 72 (13.72 mg/L) hours, respectively. Future studies to elucidate the presence of functional genes for P metabolism in lichens, as well as studies in the field of proteomics for the discovery of yeast proteins related to P solubilization are needed. Thus, the high prevalence of lichen-associated yeast communities probably contributed to the high frequency of phosphate-solubilizing isolates in this study. [ABSTRACT FROM AUTHOR]

Ascaris lumbricoides and Ascaris suum are described as helminths that infect humans and pigs, respectively. It is estimated that infection by A. lumbricoides affects about 447 million individuals living in tropical regions of developing countries. However, there is an increasing number of cases of human ascariasis in countries with no recent history of autochthonous infection by A. lumbricoides. In these places, pigs have been incriminated as the main source of human infection. Conventional parasitological diagnosis does not allow species-specific identification, and the real epidemiological scenario of human and swine ascariasis is still uncertain. Therefore, this work presents the application of a species-specific molecular diagnosis, based on the allele-specific PCR methodology (AS-PCR), using the Internal Transcript Space 1 (ITS-1) of the ribosomal DNA, as a target for differentiating between the two species, using DNA obtained from eggs. To validate the methodology, stool samples positive for Ascaris spp, were obtained from 68 humans from seven Brazilian states and from six pigs from the state of Minas Gerais. All samples obtained from humans were genotyped as A. lumbricoides and all samples obtained from swine were genotyped as A. suum. These results are in agreement with the literature, which demonstrates that in most endemic regions, transmission cycles are separate. Therefore, the execution of this work allowed the availability of a useful methodology for the differential diagnosis of the species, which may contribute to the characterization of the real epidemiological profile of human and swine ascariasis, and to the implementation of future control strategies. [ABSTRACT FROM AUTHOR]

The search for sustainable development has increased interest in the improvement of technologies that use renewable energy sources. One of the alternatives in the production of renewable energy comes from the use of waste including urban solids, animal excrement from livestock, and biomass residues from agro-industrial plants. These materials may be used in the production of biogas, making its production highly sustainable and environmentally friendly. The present study aimed to evaluate the cultivated and uncultivated microbial community from a substrate (starter) used as an adapter for biogas production in anaerobic digestion processes. 16S rDNA metabarcoding revealed the domain of bacteria belonging to the phyla Firmicutes, Bacteroidota, Chloroflexi and Synergistota. The methanogenic group was represented by the phyla Halobacterota and Euryarchaeota. Through 16S rRNA sequencing of isolates recovered from the starter culture, the genera Rhodococcus (Actinobacteria phylum), Vagococcus, Lysinibacillus, Niallia, Priestia, Robertmurraya, Proteiniclasticum (Firmicutes phylum), and Luteimonas (Proteobacteria phylum) were identified, genera that were not observed in the metabarcoding data. The volatile solids, volatile organic acids, and total inorganic carbon reached 659.10 g kg−1, 717.70 g kg−1, 70,005.0 g kg−1, respectively. The cultured groups are involved in the metabolism of sugars and other compounds derived from lignocellulosic material, as well as in anaerobic methane production processes. The results demonstrate that culture-dependent approaches, such as isolation and sequencing, and culture-independent studies, such as the Metabarcoding approach, are complementary methodologies that, when integrated provide robust and comprehensive information about the microbial communities involved in processes of the production of biogas in anaerobic digestion processes. [ABSTRACT FROM AUTHOR]

In this research batch reactors were operated with coffee processing waste and autochthonous microbial consortium, and a taxonomic and functional analysis was performed for phase I of stabilization of maximum H2 production and for phase II of maximum H2 consumption. During phase I, the reactor's operating conditions were pH 4.84 to 8.18, headspace 33.18% to 66.82%, and pulp and husk from 6.95 to 17.05 g/L. These assays continued for phase II, with initial pH conditions of 5.8–8.1, headspace of 33.18–66.82%, and pulp and husk remaining from phase I. The highest homoacetogenesis was observed in assay 5 with pH 7.7, 40% headspace, and 15 g/L of pulp and husk (initial concentrations of phase I). A relative abundance of Clostridium 41%, Lactobacillus 20% and Acetobacter 14% was observed in phase I. In phase II, there was a change in relative abundance of 21%, 63%, and 1%, respectively, and functional genes involved with autotrophic (formyltetrahydrofolate synthase) and heterotrophic (enolase) homoacetogenesis, butanol (3-hydroxybutyryl-CoA dehydrogenase), and propionic acid (propionate CoA-transferase) were identified. This study provides a new and amplified insight into the physicochemical and microbiological factors, which can be used to propose adequate operational conditions to maximize the bioenergy production and reduce homoacetogenesis in biological reactors. [ABSTRACT FROM AUTHOR]

The quantitative determination of average roughness parameters, from the determination of height variations of the surface points, is frequently used to estimate the adhesion between an adhesive and the surface of a substrate. However, to determine the interaction between an adhesive and a surface of a heterogeneous material, such as a red ceramic, it is essential to define other roughness parameters. This work proposes a method for determining the roughness of red ceramic blocks from a three-dimensional evaluation, with the objective of estimating the contact area that the ceramic substrate can provide for a cementitious matrix. The study determines the average surface roughness from multiple planes and proposes the adoption of 2 more roughness parameters, the valley area index and the average valley area. The results demonstrate that there are advantages in using the proposed multiple plane method for roughness computation and that the valley area parameters are efficient to estimate the extent of adhesion between the materials involved. [ABSTRACT FROM AUTHOR]

Cyanobacteria massive proliferations are common in freshwater bodies worldwide, causing adverse effects on aquatic ecosystems and public health. Numerous species develop blooms. Most of them correspond to the toxic microcystin-producing cyanobacterium Microcystis aeruginosa. Microorganisms recovered from Antarctic environment can be considered an unexploited source of antimicrobial compounds. Data about their activity against cyanobacteria are scant or inexistent. This study aimed to evaluate the capacity of Antarctic bacteria to inhibit the proliferation of M. aeruginosa BCPUSP232 and to degrade microcystin-LR (MC-LR). Cell-free extracts of seventy-six bacterial strains were initially tested for antimicrobial activity. Unidentified (UN) strains 62 and ES7 and Psychromonas arctica were able to effectively lyse M. aeruginosa. Eight strains showed MIC ranging from 0.55 to 3.00 mg mL−1, with ES7 showing the best antimicrobial activity. Arthrobacter sp. 443 and UN 383 were the most efficient in degrading MC-LR, with 24.87 and 23.85% degradation, respectively. To our knowledge, this is the first report of antimicrobial and MC-LR degradation activities by Antarctic bacteria, opening up perspectives for their future application as an alternative or supporting approach to help mitigate cyanobacterial blooms. [ABSTRACT FROM AUTHOR]

The need for more effective drugs for the treatment of infectious diseases as well as for general applications including wound healing and burn surgery, has guided efforts for the discovery of new compounds of medical interest. Microorganisms found in textile industrial waste have the ability to produce a variety of enzymes and/or secondary metabolites including molecules of pharmaceutical interest. The present work investigated the biotechnological potential of filamentous fungi isolated from textile industry wastewater for the production of collagenase and antimicrobial metabolites. From 28 isolates assayed, Sarocladium sp. ITF33 showed specific collagenolytic activity with values of 7.62 and 9.04 U mg−1 for the intracellular and extracellular fractions, respectively. The isolate Penicillium sp. ITF28 showed the best antimicrobial activity, reaching MIC ranging from 1.0 to 0.0625 mg mL−1 against five pathogenic bacteria. Molecular analyzes suggest that the isolate Sarocladium sp. ITF 33 can be considered a species not yet described. The results of the present work encourage studies of characterization and purification of the enzymes and secondary metabolites produced by the isolates found aiming future applications in the medical and pharmaceutical fields. [ABSTRACT FROM AUTHOR]

Soil contamination with diesel oil is quite common during processes of transport and storage. Bioremediation is considered a safe, economical, and environmentally friendly approach for contaminated soil treatment. In this context, studies using hydrocarbon bioremediation have focused on total petroleum hydrocarbon (TPH) analysis to assess process effectiveness, while ecotoxicity has been neglected. Thus, this study aimed to select a microbial consortium capable of detoxifying diesel oil and apply this consortium to the bioremediation of soil contaminated with this environmental pollutant through different bioremediation approaches. Gas chromatography (GC-FID) was used to analyze diesel oil degradation, while ecotoxicological bioassays with the bioindicators Artemia sp., Aliivibrio fischeri (Microtox), and Cucumis sativus were used to assess detoxification. After 90 days of bioremediation, we found that the biostimulation and biostimulation/bioaugmentation approaches showed higher rates of diesel oil degradation in relation to natural attenuation (41.9 and 26.7%, respectively). Phytotoxicity increased in the biostimulation and biostimulation/bioaugmentation treatments during the degradation process, whereas in the Microtox test, the toxicity was the same in these treatments as that in the natural attenuation treatment. In both the phytotoxicity and Microtox tests, bioaugmentation treatment showed lower toxicity. However, compared with natural attenuation, this approach did not show satisfactory hydrocarbon degradation. Based on the microcosm experiments results, we conclude that a broader analysis of the success of bioremediation requires the performance of toxicity bioassays. [ABSTRACT FROM AUTHOR]

In association with lichens, bacteria can play key roles in solubilizing sources of inorganic phosphates that are available in the environment. In this study, the potential of bacteria isolated from 15 Antarctic lichen samples for phosphate solubilization was investigated. From 124 bacteria tested, 66 (53%) were positive for phosphate solubilization in solid NBRIP medium, with a higher prevalence of Pseudomonas, followed by Caballeronia and Chryseobacterium. Most of the phosphate-solubilizing bacteria were isolated from Usnea auratiacoatra, followed by Caloplaca regalis and Xanthoria candelaria. Two isolates showed outstanding performance, Pseudomonas sp. 11.LB15 and Pseudomonas sp. 1.LB34, since they presented solubilization in the temperature range from 15.0 to 30.0 °C, and maximum quantification of soluble phosphate at 25.0 °C was 511.21 and 532.07 mg/L for Pseudomonas sp. 11.LB15 and Pseudomonas sp. 1.LB34, respectively. At 30.0 °C soluble phosphate yield was 639.43 and 518.95 mg/L with pH of 3.74 and 3.87 for Pseudomonas sp. 11.LB15 and Pseudomonas sp. 1.LB34, respectively. Fumaric and tartaric acids were released during the solubilization process. Finally, bacteria isolated from Antarctic lichens were shown to have the potential for phosphate solubilization, opening perspectives for future application in the agricultural sector and contributing to reduce the use of chemical fertilizers. [ABSTRACT FROM AUTHOR]

In the last decades, efforts to reduce the use of fossil fuels have increased the search for alternative sustainable sources of renewable energy. In this scenario, hydrocarbons derived from fatty acids are among the compounds that have been drawing attention. The intracellular production of hydrocarbons by bacteria derived from cold environments such as the Antarctic continent is currently poorly investigated, as extremophilic microorganisms provide a great range of metabolic capabilities and may represent a key tool in the production of biofuels. The aim of this study was to explore the ability of bacterial cells derived from extreme environments to produce hydrocarbons with potential for further use as biofuels. Seven bacteria isolated from Antarctic samples were evaluated for hydrocarbon production using GC–MS approaches. Two isolates, identified as Arthrobacter livingstonensis 593 and Pseudoalteromonas arctica 628, were able to produce the hydrocarbon undecane (CH3-(CH2)9-CH3) in concentrations of 1.39 mg L−1 and 1.81 mg L−1, respectively. Results from the present work encourage further research focusing on the optimization of hydrocarbon production by the isolates identified as producers, which may be used in further aircraft biofuel production. This is the first report on the production of the undecane compound by bacteria isolated from waterlogged soil and sponge from Antarctica. [ABSTRACT FROM AUTHOR]

A large-scale (19.8L) Fluidized Bed Reactor (FBR) operated for 592 days was used to assess the removal performance of linear alkylbenzene sulfonate (LAS). Adjustments in hydraulic retention time (HRT) (18 and 30 h), ethanol (50, 100, 200 mg L−1) and linear alkylbenzene sulfonate (LAS) concentration (6.3–24.7 mg L−1) with taxonomic and functional characterization of biomass using Whole Genome Shotgun Metagenomic (WGSM) represented a major step forward for optimizing biological treatments of LAS. In addition, the variation of the upflow velocity (0.5, 0.7 and 0.9 cm s−1) was investigated, which is a parameter that had not yet been correlated with the possibilities of LAS removal in FBR. Lower Vup (0.5 cm s−1) allied to higher ethanol concentration (200 mg L−1) resulted in lower LAS removal (29%) with predominance of methanogenic archaea and genes related to methanogenesis, while higher Vup (0.9 cm s−1) led to aerobic organisms and oxidative phosphorylation genes. An intermediate Vup (0.7 cm s−1) and higher HRT (30 h) favored sulfate reducing bacteria and genes related to sulfur metabolism, which resulted in the highest LAS (83%) and COD (77%) removal efficiency. [ABSTRACT FROM AUTHOR]

Biological ammonium removal via heterotrophic nitrification/aerobic denitrification (HN/AD) presents several advantages in relation to conventional removal processes, but little is known about the microorganisms and metabolic pathways involved in this process. In this study, Pseudomonas stutzeri UFV5 was isolated from an activated sludge sample from oil wastewater treatment station and its ammonium removal via HN/AD was investigated by physicochemical and molecular approaches to better understand this process and optimize the biological ammonium removal in wastewater treatment plants. Results showed that P. stutzeri UFV5 removed all the ammonium in 48–72 hours using pyruvate, acetate, citrate or sodium succinate as carbon sources, C/N ratios 6, 8, 10 and 12, 3–6% salinities, pH 7–9 and temperatures of 20–40 °C. Comparative genomics and PCR revealed that genes encoding the enzymes involved in anaerobic denitrification process are present in P. stutzeri genome, but no gene that encodes enzymes involved in autotrophic nitrification was found. Furthermore, transcriptomics showed that none of the known enzymes of autotrophic nitrification and anaerobic denitrification had their expression differentiated and an upregulation of the biosynthesis machinery and protein translation was observed, besides several genes with unknown function, indicating a non-conventional mechanism involved in HN/AD process. [ABSTRACT FROM AUTHOR]

Microbial oxidation potentials of extremophiles recovered from Pampo Sul oil field, Campos Basin, Brazil, in pure culture or in consortia, were investigated using high-throughput screening (HTS) and multibioreactions. Camphor ( 1), cis-jasmone ( 2), 2-methyl-cyclohexanone ( 3), 1,2-epoxyoctane ( 4), phenylethyl acetate ( 5), phenylethyl propionate ( 6), and phenylethyl octanoate ( 7) were used to perform multibioreaction assays. Eighty-two bacterial isolates were recovered from oil and formation water samples and those presenting outstanding activities in HTS assays were identified by sequencing their 16S rRNA genes. These results revealed that most microorganisms belonged to the genus Bacillus and presented alcohol dehydrogenase, monooxygenase, epoxide hydrolase, esterase, and lipase activities. [ABSTRACT FROM AUTHOR]

Both domestic and industrial effluent treatments contain or produce nitrogen loading during the treatment process. It is important to seek the removal of nitrogen while maintaining the design of existing systems, which are usually composed by the association of anaerobic and aerobic reactors. Thus, in this research, an anaerobic filter (AF) and an upflow anaerobic sludge blanket (UASB) reactors were fed with synthetic effluent enriched with nitrate to compare how these reactors would behave if they became denitrifying reactors. With the application of 100.0 mg NO3−-NL−1, the AF presented better efficiency. With respect to the biogas production, the composition was significantly altered: from CH4 and CO2 concentrations close to 70% and 13% without NO3N addition to N2 concentration higher than 85% with addition of 100.0 mg NO3−-NL−1. The UASB hydrodynamic profile was modified due to an increase in the mixing behavior along the denitrification stages by biogas production. This was not observed in the AF due to the presence of the support media, which was also responsible for ensuring a greater capacity to withstand denitrification without organic matter being carried out of the system. [ABSTRACT FROM AUTHOR]