Search

Background: The leaching of substances and the ecotoxic effects of eluates were studied for joint grouts that are based on various types of binders. Eight products, two of them containing either epoxy resin, polybutadiene or polyurethane binders, or modified cement, were investigated using harmonized leaching tests for construction products in combination with ecotoxicity tests on algae, daphnia, luminescent bacteria, fish eggs and mutagenicity in accordance with CEN/TR 17105. In addition to basic parameters, such as pH, TOC, and inorganic components, organic substances in the eluates were analysed by gas and liquid chromatography in combination with mass spectrometry. Quantitative analyses in combination with ecotoxicity data on selected substances were used to deduce which substances cause the observed ecotoxic effects. Results: Different patterns of ecotoxic effects were observed in joint grouts with different binder types. The most ecotoxic effects were observed in epoxy resin-based products, followed by polybutadiene-based products. Fewer ecotoxic effects were observed in polyurethane-based products and modified cements. Some of these showed no ecotoxicity. Some of the substances in the eluates were identified and related to ecotoxic effects. 4-Tert-butylphenol and amines probably contributed to the ecotoxic effects of at least one of the epoxy resin-based renders, whereas cobalt is assumed to contribute to the toxic effect on algae of one of the polybutadiene-based products. However, only some of the leached substances could be identified, and only some of the ecotoxic effects can be explained by the available information on the composition of eluates and known ecotoxic profiles of the identified substances. Conclusions: Ecotoxicity tests on eluates from leaching tests indicate whether environmentally hazardous substances can be leached from construction products. Combined ecotoxicity tests and chemical analysis of eluates from EU-wide harmonized leaching tests for construction products can provide information on substances that cause these effects. This supports the identification and development of environmentally friendly construction products. This study confirmed that ecotoxicity tests in accordance with CEN/TR 17105 are a tool well-suited to support the implementation of the European Commission's zero pollution vision for 2050 and to reduce pollution to levels no longer considered harmful to health and natural ecosystems. [ABSTRACT FROM AUTHOR]

In this paper, the releasing characteristics and biological toxicity of Tl, Hg, As and Sb in waste of Lanmuchang mercury-thallium mine were studied. The results indicated that strong acidity can significantly promote the release of Tl from waste. With the increase of pH, the release of Sb grew steadily, while Hg and As showed a trend of first increasing and then decreasing. Fe2(SO4)3 contributed less to the release of As and Sb than to that of Hg and Tl. FeCl3 significantly inhibited the release of As, Sb and Tl. In the leaching experiments of litter and root exudates, the lixiviums appeared neutral, and the litter and root exudates solution significantly reduced the release of Tl, and showed less toxicity to luminescent bacteria. However, they promoted the release of Hg, As and Sb at different levels. [ABSTRACT FROM AUTHOR]

Although luminescent bacteria-based bioluminescence inhibition assay has been widely used in the toxicity assessment of environmental pollutants, the response of a luminescent bacterium usually lacks specificity to a target analyte. Recently, some specific analyte inductive promoters were fused to the lux genes for the purpose of selective bioluminescent sensing, and suits of specific promoters were fused to lux genes to compose a bioluminescent array sensor for simultaneous identification of multiple analytes. However, specific promoter-based methods still suffer from drawbacks including limited selectivity, slow responding time, expensive to construct different promoters involved plasmids, and laborious to find new promoters. Herein, we proposed a novel strategy to construct a lux reporter array sensor by directly transforming the natural lux genes in different bacterial hosts without the involvement of any specific promoters. Due to the distinct pathways of signal production, the responding time of the current different bacterial host (DBH)-based lux reporter array has nearly an order of magnitude faster than with specific promoter-based methods. The DBH-based lux reporter array was successfully used for simultaneous identification, quantification, and toxicity/bioactivity assessment of multiple metal ions. Obviously, all the chemical synthetic material-based metal ion sensing methods cannot simultaneously achieve analysis and toxicity evaluation. This approach possessed additional advantages of facile construction, easy operation, high selectivity, fast response, and strong adaptability to other analytes. [ABSTRACT FROM AUTHOR]

Toxicity evaluation of wastewater, polluted sediment and water streams is a very crucial aspect of environmental pollution monitoring. In this work, a newly developed luminescent bacterial test using a tropical luminescent bacterium, Photobacterium sp. strain MIE was used to assess the toxicity of several heavy metals using a 15-min assay format. The assessment was carried out by exposing strain MIE to different concentrations of heavy metals ranging from 0.001 to 200 mg/L in a DTX microplate 96 wells. The toxicity result based on the inhibitory concentration (IC50) was Hg (0.053 mg/L) > Ag (0.12 mg/L) > Cu (0.85 mg/L) > Ni (12.32 mg/L) > Zn (18.72 mg/L) > Cr (26.02 mg/L). Principal Component Analysis (PCA) and Agglomerative Hierarchical Clustering (AHC) analyses showed the sensitivity (IC50) of strain MIE to several toxic heavy metals are comparable to the commercial luminescent assay, Microtox™ as both clusters together making it a good choice for an alternative near-real-time monitoring of heavy metals. The sensitivity of strain MIE towards heavy metals was proven through field trial works on several heavy metal-polluted sites in Malaysia. Thus, it is a good candidate as an early detection system for heavy metals in aquatic bodies in tropical countries. [ABSTRACT FROM AUTHOR]

The scientific basis for producing luminescent biosensors containing free and immobilized luminescent bacteria is discussed. Modern technologies for engineering target objects, procedures used to immobilize bacteria in different carriers, as well as procedures for integral and specific biodetection of toxins are presented. Data regarding generation and application of biomonitoring for ecotoxicants derived from natural and genetically engineered photobacterial strains are analyzed. Special attention is given to immobilization of photobacteria in polyvinyl alcohol-containing cryogel. The main physicochemical, biochemical, and technological parameters for stabilizing luminescence in immobilized bacteria are described. Results of the application of immobilized photobacterial preparations both during discrete and continuous biomonitoring for different classes of ecotoxicants are presented. [ABSTRACT FROM AUTHOR]

The aim of the present study was the chemical characterization of some medically relevant essential oils (tea tree, clove, cinnamon bark, thyme, and eucalyptus) and the investigation of antibacterial effect of the components of these oils by use of a direct bioautographic method. Thin-layer chromatography (TLC) was combined with biological detection in this process. The chemical composition of the oils was determined by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). Eucalyptol (84.2%) was the main component of the essential oil of eucalyptus, eugenol (83.7%) of clove oil, and trans-cinnamic aldehyde (73.2%), thymol (49.9%), and terpinen-4-ol (45.8%) of cinnamon bark, thyme and tea tree oils, respectively. Antibacterial activity of the separated components of these oils as well as of their pure main components (eucalyptol, eugenol, trans-cinnamic aldehyde and thymol) was observed against the Gram-negative luminescence gene-tagged plant pathogenic bacterium Pseudomonas syringae pv. maculicola (Psmlux) and the Gram-negative, naturally luminescent marine bacterium Vibrio fischeri. On the whole, the antibacterial activity of the essential oils could be related to their main components, but the minor constituents may be involved in this process. trans-Cinnamic aldehyde and eugenol were the most active compounds in TLC-bioautography. The sensitivity of TLC-bioautographic method can be improved by using luminescent test bacteria. This method is more cost-effective and provides more reliable results in comparison with conventional microbiological methods, e.g., disc-diffusion technique. [ABSTRACT FROM AUTHOR]

The ability of marine luminescent bacteria to synthesize polyesters of hydroxycarboxylic acids (polyhydroxyalkanoates, PHA) as reserve macromolecules was studied. Twenty strains from the collection of the luminescent bacteria CCIBSO (WDCM839) of the Institute of Biophysics, Siberian Branch, Russian Academy of Sciences, assigned to different taxa ( Photobacterium leiognathi, Ph. phosphoreum, Vibrio harveyi, and V. fischeri) were analyzed. The most productive strains were identified, and the conditions ensuring high polymer yields in batch culture (40–70% of the cell dry mass weight) were determined. The capacity for synthesizing two-and three-component polymers containing hydroxybutyric acid as the main monomer and hydroxyvaleric and hydroxyhexanoic acids was revealed in Ph. leiognathi and V. harveyi strains. The results allow luminescent microorganisms to be regarded as new producers of multicomponent polyhydroxyalkanoates. [ABSTRACT FROM AUTHOR]

Manifestation of pleiotropic effects in the isogenic variants of the luminescent bacterium Photobacterium leiognathi 54 was investigated. The decrease or increase of the expression level of bioluminescence was caused by changes in lux operon regulation. The dynamics of the bioluminescence of dark and dim variants did not differ from the dynamics of the initial luminescent variant, but dependence of the level of luminescence intensity on the exogenous autoinducer of the lux operon was revealed. The investigated variants of P. leiognathi 54 inherited fairly stable morphological characteristics, colony architectonics, level of luminescence, and activity of some enzymes; variants with reduced bioluminescence formed colonies of the S type. Stable bright variants with S-and R-type colonies appeared both in the initial strain population and in the dark variant population, but with smaller frequency. Populations of the bright variant with R-type colonies were most heterogeneous; this can be determined by the lack of glucose repression of the bioluminescence in contrast to other investigated inherited variants of P. leiognathi. [ABSTRACT FROM AUTHOR]

De-icers are essential to wintertime road maintenance in Nordic countries. The use of road salts (NaCl, CaCl2 and MgCl2) is having significant effects on groundwater. There has been a growing concern of environmental effects resulting from de-icing. Regulatory bodies have tried to find de-icers which have less harmful impacts on soil and groundwater. Alternative new organic de-icers are e.g. potassium formiate, potassium acetate, and calcium magnesium acetate. At present, the decision finding for soil and water quality assessment is mainly based on the results of chemical analyses. However, ecotoxicological characterization will provide more useful information for determining environmental effects of de-icers. Six different de-icers, NaCl, CaCl2, MgCl2, potassium formicate KFo, potassium acetate KAc and calcium magnesium acetate CMA were studied with different bioassays. These bioassays were two plant tests (onion Allium cepa root elongation test and duckweed Lemna growth inhibition test), an enzyme inhibition test (reverse electron transport test, RET) and a microbial test (luminescent bacteria Vibrio fischeri, BioTox test). Most of the responses of the de-icers tested were toxic to test organisms. CMA was unsuitable for RET and BioTox tests because it was not possible to analyze turbid samples with these bioassays. On the whole, organic chemicals were more toxic than the inorganic salts. According to the Lemna and Allium cepa tests KFo was the most toxic and the toxicity ranking of the de-icers was KFo > KAc > CMA > CaCl2 > NaCl > MgCl2. The sensitivity ranking for tests in decreasing order was Lemna > Allium cepa > RET > BioTox. The plant tests proved to be relevant, easy, cost-effective and sensitive screening methods of de-icers: Lemna test was 92 times more sensitive and Allium test 70 times more sensitive than BioTox to KFo. The tested de-icers had significant effects on plant growth, microbial luminescence and enzymatic activity. Toxicity could hardly be predicted from the chemical concentrations of these de-icers. In summary, these results demonstrate a need for including toxicity measurements in the evaluation of technologies used in soil treatment and illustrate the potential value of such measurements for ensuring that no or minimal environmental contamination would arise from de-icing process. [ABSTRACT FROM AUTHOR]

Copyright of Umweltwissenschaften und Schadstoff-Forschung is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)