Search

The present work focuses on performance improvement and emission reduction of conventional diesel engine's performance by incorporating various designs of intake manifolds while operating on different alternative fuels. The intake manifold was designed in a helical shape to produce higher turbulence in the combustion chamber. Three intake manifolds were designed while varying the internal diameter (ID) of helical shape, namely 1, 2 and 3 ID. In this study, the engine was operated on various alternative fuels, i.e., lemongrass oil, linseed oil and gas-to-liquid fuels. The improvement in performance and reduction in emission of the engine were highest for the engine connected with the 1-ID intake manifold. The gas-to-liquid fuel having the greater cetane number as output of the results is decreased the peak pressure. The oxides of nitrogen were significantly reduced by 51% for the engine connected with the 1-ID design manifold, and exhaust gas temperature also slightly decreased 24% when correlated with the diesel fuel. The presence of more oxygen content in the biodiesel used in the 1-ID manifold design shows the result in reduction of CO and HC by 35% and 46%, respectively, when correlated with the base fuel.

Poly(fluorene-alt-benzothiadiazole) having 5 and 10% equivalent meso-tetraphenylporphyrin (m-MTPCC) linked through oxyethylene spacer in carbazole (P2, P3) and the parent poly(9,9-di-hexylfluorene-alt-2,1,3-benzothiadiazole) (P1) were synthesized using Suzuki polymerization reaction. These polymers were characterized using FT-IR, 1H NMR, TGA and gel permeation chromatography. The synthesized polymers are soluble in common organic solvents and are found to be thermally stable. Weight average molecular weights of the polymers were 51.895, 71.224 and 34.789 kDa for P1, P2 and P3, respectively. These copolymers (P2 and P3) shows absorption maxima at around 320, 422, 452 nm and emission maxima at 540 nm in solution, whereas in film state, these polymers (P2 and P3) shows absorption maxima at around 322, 422, 466 and 554 nm and emission at around 539, 654 and 718 nm. The photoluminescence emission at 648 and 720 nm when excited at 320 nm shows that energy transfer from polymer backbone to porphyrin. Surface morphology, optical absorption and emission properties of these polymers with PCBM were also studied. Electrochemical characterization of these polymers shows deep HOMO levels for P2 and P3 when compared with parent polymer and the details are reported.

A series of alternate block copolymers of polyphenylene vinylenes that have 1,3-dioctyloxy phenylene in the center of kinked m-terphenyl group as one of the building blocks with either one of the aromatic groups, viz., 1,4-dioctyloxy benzene, 4,6-dioctyloxy benzene and 4,4′-dioctyloxy biphenyl, was synthesized through Heck polymerization. These alternate block copolymers, viz., poly(2,5-bis(octyloxy)phenylene vinylene alt 4′,6′-bis(octyloxy)-1,1′:3′,1″-terphenylene) (P1), poly(2,4-bis(octyloxy)phenylene vinylene alt 4′,6′-bis(octyloxy)-1,1′:3′,1″-terphenylene) (P2) and poly(4,4′-bis(octyloxy-3,3′-biphenylene vinylene alt 4′,6′-bis(octyloxy)-1,1′:3′,1″-terphenylene) (P3), were characterized for their thermal and optical properties. The synthesized polymers had good solubility in organic solvents and were stable up to 350 °C. The molecular weights of the synthesized polymers were in the range 4370–10,900 Da with polydispersity range 1.52–1.65, which were measured by the gel permeation chromatography technique. The optical properties of these polymers showed absorptions in solution at around 400, 329, and 345 nm for P1, P2, and P3 polymers, respectively. The photoluminescence emission maxima of the polymers were at around 461 nm with a shoulder 439 and 424 nm for P1, P2, and P3, respectively. Photoluminescence emission of films of these polymers showed minimum redshift (20 nm) when compared with spectra of their solutions. The optical and photoluminescence emission properties of these polymers were found to vary on the backbone structure.

Highly graphitic carbons are obtained by precipitating carbon from molten steel inoculated with bismuth. Scanning electron microscopy images show that the products have a potato peel morphology. The inoculant leads to a breaking of the local symmetry of the graphitic structure as evidenced by Raman spectroscopic studies. The products exhibit flat charge-discharge profiles below about 200 mV versus LrVLi, reversible capacities even exceeding the theoretical limit of 372 mAh/g for perfectly graphitic structures, low first-cycle irreversible capacities, and sustained hundreds of cycles.

We are reporting the preparation and characterization of nano-titanium dioxide and silica. The corrosion resistance performance of these nanopigments in silicone as well as silicone–polypyrrole Interpenetrating Polymer Network has been evaluated by impedance spectroscopy. The capacitance and resistance exerted by this nanocomposite coating were compared with the microcomposite coating and found that the nanocomposite coatings has the resistance in the order of 108 Ω cm2 in 3% sodium chloride solution, which is more than the microcomposite coating. The comparison of heat resistance performance of these composite coatings indicates that nanocomposite coatings exhibit higher heat resistance property than the microcomposite coatings.