Search

The objective of this study was to assess the possibility of retrofitting an existing full-scale wastewater treatment plant (WWTP) based on a sequencing batch reactor (SBR) technology with the enhanced biological phosphorus removal (EBPR) process. Wastewater characterisation showed highly variable influent composition that fluctuated throughout the year with a rather low and unstable SBOD/TP ratio (SBOD—soluble biological oxygen demand; TP—total phosphorus), which is considered unfavourable for EBPR. Characterisation of the sludge showed that the non-EBPR SBR sludge from the WWTP Koprivnica contained no detectable phosphorus accumulating organisms (PAO), but could be transformed in a laboratory into EBPR performing sludge in less than 45 days under favourable conditions for PAOs. The microbial community composition was assessed using an FISH (fluorescence in situ hybridization) analysis, which confirmed that the original sludge from the WWTP, which did not have detectable PAOs, was transformed into the sludge enriched by PAOs belonging to the genus ‘Candidatus Accumulibacter phosphatis’ after 43 days of cultivation. A plant retrofit, based on the results of laboratory experiments, was proposed with the enrichment of the wastewater with volatile fatty acids via primary anaerobic fermentation and step feeding. Results of mathematical modelling (BioWin) showed that such strategy could lead to sufficient P removal through EBPR in this WWTP.

The operation of membrane bioreactors (MBRs) at higher than usual mixed liquor suspended solids (MLSS) concentrations may enhance the loading rate treatment capacity while minimizing even further the system's footprint. This requires operating the MBR at the highest possible MLSS concentration and biomass activity (e.g., at high loading rates and low solid retention times (SRTs)). Both a negative effect of the MLSS concentrations and a positive effect of the SRT on the oxygen transfer have been reported when using conventional fine bubble diffusers. However, most of the evaluations have been carried out either at extremely high SRTs or at low MLSS concentrations eventually underestimating the effects of the MLSS concentration on the oxygen transfer. This research evaluated the current limitations imposed by fine bubble diffusers in the context of the high-loaded MBR (HL-MBR) (i.e., high MLSS and short SRT-the latter emulated by concentrating municipal sludge from a wastewater treatment plant (WWTP) operated at a short SRT of approximately 5 days). The high MLSS concentrations and the short SRT of the original municipal sludge induced a large fraction of mixed liquor volatile suspended solids (MLVSS) in the sludge, promoting a large amount of sludge flocs that eventually accumulated on the surface of the bubbles and reduced the free water content of the suspension. Moreover, the short SRTs at which the original municipal sludge was obtained eventually appear to have promoted the accumulation of surfactants in the sludge mixture. This combination exhibited a detrimental effect on the oxygen transfer. Fine bubble diffusers limit the maximum MLSS concentration for a HL-MBR at 30 g L-1 ; beyond that point is either not technically or not economically feasible to operate ; an optimum MLSS concentration of 20 g L-1 is suggested to maximize the treatment capacity while minimizing the system's footprint.

In the last decade, flooding has caused the death of over 60,000 people and affected over 900 million people globally. This is expected to increase as a result of climate change, increased populations and urbanisation. Floods can cause infections due to the release of water-borne pathogenic microorganisms from surcharged combined sewers and other sources of fecal contamination. This research contributes to a better understanding of how the occurrence of water-borne pathogens in contaminated shallow water bodies is affected by different environmental conditions. The inactivation of fecal indicator bacteria Escherichia coli was studied in an open stirred reactor, under controlled exposure to simulated sunlight, mimicking the effect of different latitudes and seasons, and different concentrations of total suspended solids (TSS) corresponding to different levels of dilution and runoff. While attachment of bacteria on the solid particles did not take place, the decay rate coefficient, k (d−1), was found to depend on light intensity, I (W m−2), and duration of exposure to sunlight, T (h d−1), in a linear way (k = kD+ 0.03·I and k = kD+ 0.65·T, respectively) and on the concentration of TSS (mg L−1), in an inversely proportional exponential way (k = kD+ 14.57·e−0.02·[TSS]). The first-order inactivation rate coefficient in dark conditions, kD= 0.37 d−1, represents the effect of stresses other than light. This study suggests that given the sunlight conditions during an urban flood, and the concentration of indicator organisms and TSS, the above equations can give an estimate of the fate of selected pathogens, allowing rapid implementation of appropriate measures to mitigate public health risks. Electronic supplementary material The online version of this article (10.1007/s41742-018-0160-5) contains supplementary material, which is available to authorized users., Article Highlights It was demonstrated under controlled conditions that the inactivation of fecal indicator bacteria E. coli is higher under higher solar irradiance, longer duration of daylight and low TSS concentrations.The results indicate that under high TSS concentrations the bacteria, even if not attached on particles, are protected from photo-inactivation for a period of a few days, as the decay rate decreases exponentially with an increase in TSS concentration. Electronic supplementary material The online version of this article (10.1007/s41742-018-0160-5) contains supplementary material, which is available to authorized users.

Biomarkers of health and disease in urine and stool can be longitudinally tracked with a ‘smart’ toilet incorporating biometric identification, pressure and motion sensors, urinalysis strips and a uroflowmeter.

Sulphate-rich wastewaters can be generated due to (i) use of saline water as secondary-quality water for sanitation in urban environments (e.g. toilet flushing), (ii) discharge of industrial effluents, (iii) sea and brackish water infiltration into the sewage and (iv) use of chemicals, which contain sulphate, in drinking water production. In the presence of an electron donor and absence of oxygen or nitrate, sulphate can be reduced to sulphide. Sulphide can inhibit microbial processes in biological wastewater treatment systems. The objective of the present study was to assess the effects of sulphide concentration on the anaerobic and aerobic physiology of polyphosphate-accumulating organisms (PAOs). For this purpose, a PAO culture, dominated by Candidatus Accumulibacter phosphatis clade I (PAO I), was enriched in a sequencing batch reactor (SBR) fed with acetate and propionate. To assess the direct inhibition effects and their reversibility, a series of batch activity tests were conducted during and after the exposure of a PAO I culture to different sulphide concentrations. Sulphide affected each physiological process of PAO I in a different manner. At 189 mg TS-S/L, volatile fatty acid uptake was 55% slower and the phosphate release due to anaerobic maintenance increased from 8 to 18 mg PO4-P/g VSS/h. Up to 8 mg H2S-S/L, the decrease in aerobic phosphorus uptake rate was reversible (Ic60). At higher concentrations of sulphide, potassium (>16 mg H2S-S/L) and phosphate (>36 mg H2S-S/L) were released under aerobic conditions. Ammonia uptake, an indicator of microbial growth, was not observed at any sulphide concentration. This study provides new insights into the potential failure of enhanced biological phosphorus removal sewage plants receiving sulphate- or sulphide-rich wastewaters when sulphide concentrations exceed 8 mg H2S-S/L, as PAO I could be potentially inhibited.

The activity of sulfate reducing bacteria (SRB) in domestic wastewater treatment plants (WWTP) is often considered as a problem due to H2S formation and potential related odour and corrosion of materials. However, when controlled well, these bacteria can be effectively used in a positive manner for the treatment of wastewater. The main advantages of using SRB in wastewater treatment are: (1) minimal sludge production, (2) reduction of potential pathogens presence, (3) removal of heavy metals and (4) as pre-treatment of anaerobic digestion. These advantages are accessory to efficient and stable COD removal by SRB. Though only a few studies have been conducted on SRB treatment of domestic wastewater, the many studies performed on industrial wastewater provide information on the potential of SRB in domestic wastewater treatment. A key-parameter analyses literature study comprising pH, organic substrates, sulfate, salt, temperature and oxygen revealed that the conditions are well suited for the application of SRB in domestic wastewater treatment. Since the application of SRB in WWTP has environmental benefits its application is worth considering for wastewater treatment, when sulfate is present in the influent.

The use of saline water in urban areas for non-potable purposes to cope with fresh water scarcity, intrusion of saline water, and disposal of industrial saline wastewater into the sewerage lead to elevated salinity levels in wastewaters. Consequently, saline wastewater is generated, which needs to be treated before its discharge into surface water bodies. The objective of this research was to study the effects of salinity on the aerobic metabolism of phosphate-accumulating organisms (PAO), which belong to the microbial populations responsible for enhanced biological phosphorus removal (EBPR) in activated sludge systems. In this study, the short-term impact (hours) of salinity (as NaCl) was assessed on the aerobic metabolism of a PAO culture, enriched in a sequencing batch reactor (SBR). All aerobic PAO metabolic processes were drastically affected by elevated salinity concentrations. The aerobic maintenance energy requirement increased, when the salinity concentration rose up to a threshold concentration of 2 % salinity (on a W/V basis as NaCl), while above this concentration, the maintenance energy requirements seemed to decrease. All initial rates were affected by salinity, with the NH4- and PO4-uptake rates being the most sensitive. A salinity increase from 0 to 0.18 % caused a 25, 46, and 63 % inhibition of the O2, PO4, and NH4-uptake rates. The stoichiometric ratios of the aerobic conversions confirmed that growth was the process with the highest inhibition, followed by poly-P and glycogen formation. The study indicates that shock loads of 0.18 % salt, which corresponds to the use or intrusion of about 5 % seawater may severely affect the EBPR process already in wastewater treatment plants not exposed regularly to high salinity concentrations.

The use of saline water as secondary quality water in urban environments for sanitation is a promising alternative towards mitigating fresh water scarcity. However, this alternative will increase the salinity in the wastewater generated that may affect the biological wastewater treatment processes, such as biological phosphorus removal. In addition to the production of saline wastewater by the direct use of saline water in urban environments, saline wastewater is also generated by some industries. Intrusion of saline water into the sewers is another source of salinity entering the wastewater treatment plant. In this study, the short-term effects of salinity on the anaerobic metabolism of phosphate-accumulating organisms (PAO) and glycogen-accumulating organisms (GAO) were investigated to assess the impact of salinity on enhanced biological phosphorus removal. Hereto, PAO and GAO cultures enriched at a relatively low salinity level (0.02 % W/V) were exposed to salinity concentrations of up to 6 % (as NaCl) in anaerobic batch tests. It was demonstrated that both PAO and GAO are affected by higher salinity levels, with PAO being the more sensitive organisms to the increasing salinity. The maximum acetate uptake rate of PAO decreased by 71 % when the salinity increased from 0 to 1 %, while that of GAO decreased by 41 % for the same salinity increase. Regarding the stoichiometry of PAO, a decrease in the P-release/HAc uptake ratio accompanied with an increase in the glycogen consumption/HAc uptake ratio was observed for PAO when the salinity increased from 0 to 2 % salinity, indicating a metabolic shift from a poly-P-dependent to a glycogen-dependent metabolism. The anaerobic maintenance requirements of PAO and GAO increased as the salinity concentrations risen up to 4 % salinity.

Seawater toilet flushing, seawater intrusion in the sewerage, and discharge of sulfate-rich industrial effluents elevates sulfate content in wastewater. The application of sulfate-reducing bacteria (SRB) in wastewater treatment is very beneficial; as for example, it improves the pathogen removal and reduces the volume of waste sludge, energy requirement and costs. This paper evaluates the potential to apply biological sulfate reduction using acetate and propionate to saline sewage treatment in moderate climates. Long-term biological sulfate reduction experiments at 10 and 20 °C were conducted in a sequencing batch reactor with synthetic saline domestic wastewater. Subsequently, acetate and propionate (soluble organic carbon) conversion rate were determined in both reactors, in the presence of either or both fatty acids. Both acetate and propionate consumption rates by SRB were 1.9 times lower at 10 °C than at 20 °C. At 10 °C, propionate was incompletely oxidized to acetate. At 10 °C, complete removal of soluble organic carbon requires a significantly increased hydraulic retention time as compared to 20 °C. The results of the study showed that biological sulfate reduction can be a feasible and promising process for saline wastewater treatment in moderate climate.

There are two types of microbial populations described in the literature as being capable of anaerobic storage of acetic acid in activated-sludge processes: the polyphosphate-accumulating organisms (PAO) and the glycogen-accumulating non-polyphosphate organisms (GAO). Both groups use the conversion of glycogen to poly-hydroxyalkanoate to produce ATP and NADH; however, the first group can also produce ATP from polyphosphate (poly-P). No representative pure cultures are available from either group. The question arises: is the observed activity of GAO due to PAO that are depleted in poly-P ? In this study, using a laboratory sequencing batch reactor containing an enriched culture, the ability of the enriched PAO to utilize organic substrate (acetate) anaerobically was investigated under conditions of poly-P limitation and surplus glycogen content of the biomass. This study showed clearly that, under these conditions, almost no acetate was taken up. Furthermore, this strongly suggests that PAO can not use glycogen conversion to poly-hydroxyalkanoate as the sole energy source under anaerobic conditions, which seems to be the restricted to a separate group of GAO. On the basis of the results and literature data, an improved scheme for the anaerobic acetate accumulation is presented.

Biological phosphate removal has become a reliable and well-understood process for wastewater treatment. This review describes the historical development of the process and the most important microbiological and process-engineering aspects. From a microbiological point of view, the role of␣poly(hydroxyalkanoates) as storage material in a dynamic process and the use of polyphosphate as an energy reserve are the most important findings. From a process-engineering point of view, the study of biological phosphate removal has shown that highly complex biological processes can be designed and controlled, provided that the importance of the prevailing microbiological ecological processes is recognised.