Search

To test whether radial variation of wood specific gravity (WSG) is controlled by tree age or tree size in teak (Tectona grandis L.f) plantation trees, opposing different-length pith-to-bark strips which represents the differential lateral growth rate was compared using mixed-effects model which considers the heterogeneity of variances and dependency in the data to gain insight into the stochastic processes that govern the wood formation process. Various models were tested in devising an appropriate radial WSG model. Models that accounted for serial correlation in WSG data performed better than the simple structure that assumes zero correlation between measurements. The autoregressive plus random tree effect structure performed better in describing the radial variation pattern. The variability of the data related to random fluctuations during tree development and the wood formation process is modeled by the autoregressive parameter revealing the intrinsic complexity of wood formation. Since they cannot be attributed to observed factors, models should consider temporal or serial correlations when assessing wood quality. The results revealed that tree age is a decisive factor in controlling the WSG of wood, while tree size is statistically less important. Furthermore, the core wood production period varies with the growth rate. It is shown that the core wood area decreased with slow growth. Findings presented here appear to provide the first demonstration of radial variation in WSG with respect to growth rate and age for planted teak growing in Ghana.

Radial and axial variations in the longitudinal ultrasonic wave velocity within stem of 17–19-year-old Melia azedarach planted in two different sites in northern Vietnam were experimentally investigated. Wood samples were collected from 10, 50, and 90% of the radial length from pith at 0.3, 1.3, 3.3, 5.3, and 7.3 m heights above the ground to measure ultrasonic velocity (Vu), fiber length (FL), air-dry density (AD), and compressive strength (CS) at moisture content approximately 12%. The average wave velocity for two sites exhibited minimum value near the pith about 3700 m/s. It kept increasing to 4200 m/s at the middle position before remaining constant value forward to outside. In axial direction, the variation of Vu with height was very small and without statistical significance. Vu had a strong positive linear relationship with both FL (r = 0.69, p

Within-stem variations in the mechanical properties of 17–19-year-old Melia azedarach planted in two sites in northern Vietnam were examined by destructive and nondestructive methods. Wood samples were collected from 10, 50, and 90% of the radial length from pith on both sides (North and South) at 0.3, 1.3, 3.3, 5.3, and 7.3 m heights above the ground. The mean values in whole trees of wood density (WD), modulus of rupture (MOR), modulus of elasticity (MOE), and dynamic modulus of elasticity (Ed) at 12% moisture content were 0.51 g/cm3, 78.58 MPa, 9.26 GPa, and 10.93 GPa, respectively. Within the stem, the radial position was a highly (p

Variations in intrinsic wood properties [growth ring width (GRW), specific gravity (SG), fiber length (FL), and microfibril angle (MFA)] of 17–19-year-old Melia azedarach trees grown in two sites in northern Vietnam were investigated for effective utilization of the wood. Five discs were collected at 0.3-, 1.3-, 3.3-, 5.3-, and 7.3-m heights above the ground. The estimated mean GRW, SG, FL, and MFA were 7.44 mm, 0.548, 1.07 mm, and 14.65°, respectively. There were significant (P

Indole acetic acid (IAA) was believed to be an important regulator in xylem formation in conifers. However, few studies have been done on the endogenous amount of IAA in cambial region tissues in sugi (Cryptomeria japonica) trees. In this study, we report the IAA amounts in the lower and upper trunk of mature sugi cultivars (Kumotoshi, Yaichi and Obiaka) in September, and the effects of growth traits on the IAA amounts. The effect of height position (lower or upper trunk) on IAA amounts was found to be larger than that of genetic variation (Kumotoshi, Yaichi or Obiaka) by two-way ANOVA. There was no significant interaction effect (genetic variation × height position). The IAA amounts of all trees varied from 3 to 42 ng/cm2 at the lower trunk and 9 to 47 ng/cm2 at the upper trunk. Crown length and distance from crown base had significant positive and negative effects on IAA amounts in the trunk of sugi cultivars, respectively. Distance from crown base had a larger effect on IAA amounts than crown length. In Yaichi, taller trees had larger IAA amounts at both the lower and upper trunk.

Recently, breeding programs have attempted to produce high growth rates for shorter rotation cycles in plantation trees. In these trees, the ratio of juvenile wood increases; thus, the juvenile wood properties should be improved for structural use. To this end, it is important to understand the influences on juvenile wood properties precisely. In this study, we report on the indole acetic acid (IAA) amounts of juvenile sugi (Cryptomeria japonica) trees in September and compare the IAA amounts to those in mature trees. The IAA amounts at the lower trunks in juvenile trees were significantly larger than those in mature trees and the IAA amounts decreased with tree height. In each stand, except a mature tree stand, there is no significant effect of IAA amounts on latewood width and MFA. However, put together all samples, the latewood width and MFA increased with IAA amounts in samples with IAA

The purposes of this study were to accumulate fundamental data on wood properties within large Sugi logs and to take applicable variations in wood properties into consideration for sorting logs and sawing patterns. The characteristics of basic density, moisture content, growth ring width, and microfibril angle (MFA) were measured and the relationship with log and lumber quality was examined. It was considered reasonable to estimate the lumber moisture content based on the moisture content of heartwood rather than that of whole logs, especially when producing large-sized lumber. The MFA reached a constant value before the 15th ring, and within a distance of 10 cm or less from the pith. Since the E fr of lumber correlated with that of the log affected by MFA, it would be possible to produce lumber with a higher E fr from the outer position of the log, based on selecting a log above the E fr . Since the MFA would also affect the lumber warp, a sawing pattern avoiding the area around the pith or enlarging the rough sawn size when a large warp was expected could be effective in improving the lumber quality. To improve the lumber quality, not only one but also multiple wood properties must be applied to the sawing pattern.

Hinoki (Chamaecyparis obtusa) wood has been used as a structural material in Japan because of its superior mechanical properties, its excellent durability and the beautiful color of its heartwood. Variations of termite resistance and compositions of extractives among hinoki trees have been reported. However, genetic variation of termite resistance and the effect of heartwood color on termite resistance remain unknown. In this study, we report the characteristics of termite resistance and color indexes (L*, a* and b*) of heartwood of hinoki half-sib families in a progeny test stand. The survival days of termites and the mass loss of samples of hinoki heartwood differed significantly among hinoki families. Families with red-color heartwood had larger termite resistance than families with yellow-color heartwood. The termite resistances of individual samples from two families with yellow-color heartwood were as small as that of Pinus densiflora. Larger a* and smaller b* induced larger termite resistance of heartwood. The effect of DBH (diameter at breast height) of hinoki trees on termite resistance of hinoki families was small.

Rice hull–sawdust composite boards were manufactured for sound-absorbing boards in construction. The manufacturing parameters were target density (400, 500, 600, and 700 kg/m3) and rice hull content as percent weight of rice hull/sawdust/phenol resin (10/80/10, 20/70/10, 30/60/10, and 40/50/10). Commercial gypsum board and fiberboard were also used as comparative sound-absorbing materials. The average modulus of rupture (MOR) of the board with a density of 700 kg/m3 and rice hull mixing ratio of 10% was 8.6 MPa, and that of the board with a 400 kg/m3 board density and a rice hull mixing ratio of 40% was 2.2 MPa. The MOR increased with increasing board density or decreasing rice hull mixing ratio. The sound absorption coefficients of some boards (400 kg/m3 and 10%, 500 kg/m3 and 30%, and 500 kg/m3 and 40%) were better than those of the commercial 11-mm-thick gypsum board. Thus, it is concluded that rice hull–sawdust composite boards may be implemented as sound-absorbing barriers in construction due to their high sound absorption coefficients.

We investigated clonal and site variations in wood fiber length, microfibril angle, and specific gravity of seven natural hybrid clones of Acacia (Acacia mangium × Acacia auriculiformis) grown in northern and southern Vietnam. Fiber length did not differ between clones or between sites. The microfibril angle of the S2 layer did not significantly differ between clones but significantly differed between sites. Clone and site significantly affected specific gravity. The significant effects of genetic × environmental interactions on wood properties indicated the difference in the response of clones to different growing conditions. The trends of changes in fiber length, microfibril angle, and specific gravity from the vicinity of the pith to near the bark were similar for all clones at each site; however, variations in fiber length, microfibril angle, and specific gravity were more visible in northern Vietnam than in southern Vietnam, with a significant effect of genetic factors. This difference may be attributable to winter, which is experienced in northern Vietnam but not in southern Vietnam. For clone selection for plantation in the northern region, combining growth rate with wood properties was recommended. On the other hand, for plantation in the southern region, clone selection depends mainly on the growth rate, taking into consideration the specific gravity.

A dye injection method was used to elucidate the xylem water-conducting pathways of 34 broadleaved evergreen trees growing in southern Japan: two semi-ring-porous, 26 diffuse-porous, five radial-porous and one non-vessel species. The large earlywood vessels in semi-ring-porous species have a water transport function in only the outermost annual ring, as in deciduous ring-porous species. On the other hand, the small vessels in semi-ring-porous species maintain the water transport function in many outer annual rings. For the other xylem-type species, the many vessels in many outer annual rings have a water transport function. In diffuse-porous species, we categorized the water-conducting pattern within the annual rings into two types: d1 type, where water travels through vessels in the whole region; and d2 type, where water travels mainly through the earlywood vessels. The pattern in radial-porous species is similar to that in the d1 type; the pattern in non-vessels species is similar to that in the d2 type. The vessel diameter in radial-porous species is similar to that of the earlywood vessels of semi-ring-porous species. These results suggest that the conduit diameter size is only one of many factors determining the water-conducting pathways of broadleaved evergreen species.

The weatherability and combustibility of fireretardant-impregnated wood during accelerated weathering for up to 2000 h were evaluated. The ability of coating to retain fire-retardant chemicals against leaching was also examined using four coating systems (water-borne or solvent-borne, pigmented or clear, film-forming or penetrating). Furthermore, the distribution of fire retardants in the specimens was observed by scanning electron microscopy in combination with energy dispersive analysis of Xrays (SEM-EDX). The fire performance of the specimens during weathering depended on the chemical retention, and was maintained at a quasi-noncombustible material level if the chemical retention was above 150 kg/m3. The maximum duration of accelerated weathering to keep this retention was 250 h for the uncoated specimens, but increased to over 1000 h for pigmented coatings. SEM-EDX revealed that the fire retardants were accumulated in the cell lumina throughout the wood tissues. However, in the uncoated samples, the leaching of fire retardants occurred for surfaces exposed to light and water, and was observed down to a depth of ∼150 μm after 500 h. The leaching depth extended throughout the specimen after 1000 h. In contrast, the fire retardants still remained in samples finished with a solvent-borne pigmented penetrating coating even after 1000 h due to their relatively high chemical retention.

Microcracks produced in an Acacia hybrid (Acacia mangium × Acacia auriculiformis) and Melia azedarach during drying were visualized in situ using confocal laser scanning microscopy (CLSM); the morphological differences were compared. In the Acacia hybrid, numerous microcracks were found between the wood fiber and ray parenchyma, which propagated toward both the pith and bark. The microcracks closed with further drying, but persisted until the last stage of drying. In Melia azedarach, however, few microcracks formed between the wood fiber and ray parenchyma in the latewood region; they also propagated toward both the pith and bark. Because the microcracks subsequently closed, some could not be detected by CLSM. These morphological characteristics resulted from differences in the wood structure and we conclude that the interface zone between the wood fiber and ray parenchyma is one type of weak point on the transverse surface that is susceptible to checking.

Growth, specific gravity, and wood fiber length of Acacia mangium, Acacia auriculiformis, artificial acacia hybrid clones, and combinations, which were planted in a trial forest in Bavi, Vietnam, in July 2001, were examined. The radial variations from pith to bark were investigated to clarify the effect of genetic factors on these traits. Superiority of hybrids over their parents ranged from 36.3% to 41.6% for diameter, from 20.0% to 25.3% for height, from 6.9% to 20.7% for specific gravity, and from 6.1% to 12.8% for wood fiber length. The hybrid possessed heterosis in diameter, height, specific gravity, and wood fiber length regardless of whether the female parent was A. mangium or A. auriculiformis. The profiles of wood fiber length and specific gravity in the radial direction were similar for all the trees investigated. Wood fiber length was initially 0.5–0.6 mm near the pith and then increased slowly, finally reaching 1.0–1.2 mm near the bark. The specific gravity of acacia increased from 0.49–0.58 near the pith to 0.63–0.74 near the bark. From a relative distance of 30% from the pith, the specific gravity increased slightly and seemed to be stable. The relations among tree diameter, specific gravity, and wood fiber length were fair and could be represented by positive linear regression formulas. Hybrids for which A. auriculiformis was the female parent and A. mangium was the male parent had a faster growth rate and longer wood fibers than the inverse hybrids.

Wood properties of six 8-year-old natural acacia hybrid clones between Acacia mangium and Acacia auriculiformis, planted in Bavi, Vietnam, were studied. The hybrid clones possessed obvious heterosis in growth and in some wood properties. The characteristics of growth, air-dry specific gravity, lengths of fibers and vessel elements, S2 microfibril angle, green moisture content, and shrinkage were examined to clarify the variation among clones. From the results, the differences among the clones in growth and in some wood properties were significant. The pattern of distribution of specific gravity showed that there were low and high specific gravity zones in the stem. Specific gravity at stump height or at 3.0 m was useful for prediction of specific gravity in the whole tree stem. Moreover, clones with high specific gravity can be predicted at a young age. There was no significant correlation between diameter growth and specific gravity. Of the six clones studied, clone BV5 was selected as the best based on its growth ability and specific gravity.

This is the first report to ascertain potassium location in black heartwood of sugi (Cryptomeria japonica). The objective of this study was to understand the distribution of potassium in sugi black heartwood in connection with anatomical morphology. Scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDXA) was used to investigate the distribution of inorganic elements, especially potassium. In black heartwood, potassium was detected in all tissues (tracheids, ray parenchyma, and axial parenchyma), but its concentrations were different in each xylem tissue. Potassium was particularly accumulated in the droplets in axial parenchyma cells. In addition, calcium was also detected in all tissues. Phosphorus sometimes existed in the granules in ray parenchyma cells. From optical microscopy, the axial parenchyma cells were observed to be arranged in a tangential direction on transverse section and the droplets in these cells were distributed in areas of high ash and green moisture content. For red heartwood, potassium detected by SEM-EDXA was far lower in all tissues than in the black heartwood, while the trend for calcium was the converse. Potassium in axial parenchyma cells was more abundant in black heartwood than in typical pale red heartwood.

Nine trees of Cryptomeria japonica from six elite tree clones with a broad range of heartwood colors were selected. The profiles of pit aspiration percentage (ASP) of earlywood and latewood from pith to bark for green and air-dry conditions were determined to study the relationship between heartwood color and pit aspiration. Confocal laser scanning microscopy (CLSM) observations showed that the ASP of earlywood was low in sapwood and high in heartwood in the green condition. Pit aspiration increased in intermediate wood when compared with sapwood. On the other hand, latewood pits did not aspirate during heartwood formation. Comparing the air-dry condition with the green condition, sapwood pits aspirated during drying in both earlywood and latewood; however, there was no significant difference in pit aspiration of heartwood. There was no significant difference between samples with red and black heartwoods for ASP. The difference in ASP between individual trees was larger than that by heartwood color. The general advantage of CLSM over light microscopy is that serial optical sections along the Z axis can be obtained for any moisture condition, without the need for thin sectioning or embedding.

wood cells and penetration of PVA glue was examined by light microscopy and scanning and transmission electron microscopy. After planing with dull knives the wood cells were greatly distorted and cell walls were extensively damaged, particularly at and near the glue line. In comparison, sharp knives caused much less damage to cell walls and the cells had a normal or near-normal appearance. These features are discussed in detail in relation to glue penetration and the performance of glue joints after planing with sharp and dull knives.

Radiata pine sapwood and heartwood were dried using high-temperature, conventional-temperature, and air drying schedules with and without pre-steaming. They were then impregnated by vacuum treatment with double-distilled water, toluidine blue, and fluorescein dye. For sapwood, there were only minor differences in uptake between drying methods and when pre-steaming was used. Using microscopy, the primary flow pathways in sapwood were found to be the resin canal network and ray parenchyma cells, which provided conduction without large resistance. In heartwood, uptake was strongly influenced by pre-steaming the green lumber. After pre-steaming heart-wood, there was an increase in uptake from all surfaces but especially from the radial surfaces. Lower extractive contents, disruption of epithelial and ray parenchyma cells, and alteration of the condition of bordered pits were also associated with pre-steaming. It was therefore possible to classify flow paths in radiata pine heartwood five ways, according to uptake values and wood anatomical features.