Search

Introducing heating function to oil sorbents opens up a new pathway to the fast cleanup of viscous crude oil spills in situ. The oil sorption speed increases with the rise of the temperature, thus oil sorbents with high heating temperature are desirable. Besides, the oil sorbents also need to be produced environment-friendly. Here we present carbonized melamine-formaldehyde sponges (CMSs) that exhibited superior heating performance and the CMSs could be massively fabricated through a non-polluting pyrolysis process. The conductive CMSs could be heated over 300 °C with a low applied voltage of 6.9 V and keep above 250 °C for 30 min in the air without obvious damage. Such high heating performance enabled heating up the oil spills with a high rate of 2.65 °C·s−1 and 14% improvement of oil sorption coefficient compared with the state-of-the-art value. We demonstrated that one joule-heated CMS could continuously and selectively collect viscous oil spills (9,010 mPa·s) 690 times its own weight in one hour. The CMSs will be a highly competitive sorbent material for the fast remediation of future crude oil spills.

Nationwide prospective surveillance of all-age patients with acute respiratory infections was conducted in China between 2009‒2019. Here we report the etiological and epidemiological features of the 231,107 eligible patients enrolled in this analysis. Children, China operates a national surveillance program for acute respiratory infections and sampled over 200,000 patients between 2009–2019. Here, the authors present results from this program and describe patterns by age, pathogen type, presence of pneumonia, and season.

National-based prospective surveillance of all-age patients with acute diarrhea was conducted in China between 2009‒2018. Here we report the etiological, epidemiological, and clinical features of the 152,792 eligible patients enrolled in this analysis. Rotavirus A and norovirus are the two leading viral pathogens detected in the patients, followed by adenovirus and astrovirus. Diarrheagenic Escherichia coli and nontyphoidal Salmonella are the two leading bacterial pathogens, followed by Shigella and Vibrio parahaemolyticus. Patients aged, Diarrhoea is a major cause of morbidity and mortality in China. Here, the authors present results from a large sentinel surveillance scheme from 217 hospitals in all 31 provinces in mainland China, including ~150,000 patients with acute diarrhoea and covering years 2009-2018.

Stretchable electronics are in high demand for next-generation wearable devices, but their fabrication is still challenging. Stretchable conductors, flexible pressure sensors, and foldable light-emitting diodes (LEDs) have been reported; however, the fabrication of stable stretchable batteries, as power suppliers for wearable devices, is significantly behind the development of other stretchable electronics. Several stretchable lithium-ion batteries and primary batteries have been fabricated, but their low capacities and complicated manufacturing processes are obstacles for practical applications. Herein, we report a stretchable zinc/manganese-oxide (Zn-MnO2) full battery based on a silver-nanowire-coated sponge prepared via a facile dip-coating process. The spongy electrode, with a three-dimensional (3D) binary network structure, provided not only high conductivity and stretchability, but also enabled a high mass loading of electrochemically active materials (Zn and MnO2 particles). The fabricated Zn-MnO2 battery exhibited an areal capacity as high as 3.6 mAh·cm−2 and could accommodate tensile strains of up to 100% while retaining 89% of its original capacity. The facile solution-based strategy of dip-coating active materials onto a cheap sponge-based stretchable current collector opens up a new avenue for fabricating stretchable batteries.

A new family of economical duplex stainless steels in which N or Mn was substituted for Ni with composition of 22Cr-8. OMn-xNi-1. OMo-0. 7Cu-0. 7W-0. 3N (x = 0. 5–2. 0) have been developed by examining the micro-structure, mechanical and corrosion properties of these alloys. The results show that these alloys have a balanced ferrite-austenite relation. In addition, the alloys are free of precipitation of sigma phase and Cr-nitride when solution-treated at 750 to 1300 °C for 30 min. The yield strength, tensile strength and fracture elongation values of experimental alloys solution-treated at 1 050 °C for 30 min are about 500, 750 MPa and 40. 0%, respectively. Low-temperature impact properties can be improved distinctly with the increase of nickel content. Among the designed DSS alloys, the alloy with Ni of 2. 0% is found to be an optimum alloy with proper phase proportion, better low-temperature impact properties and higher pitting corrosion resistance compared with those of other alloys. The mechanical and corrosion properties and lower production cost of the designed DSSs are better than those of AISI 304.

This work investigated the preparation of chitosan nanoparticles used as carriers for immobilized enzyme. The morphologic characterization of chitosan nanoparticles was evaluated by scanning electron microscope. The various preparation methods of chitosan nanoparticles were discussed and chosen. The effect of factors such as molecular weight of chitosan, chitosan concentration, TPP concentration, and solution pH on the size of chitosan nanoparticles was studied. Based on these results, response surface methodology was employed. The results showed that solution pH, TPP concentration, and chitosan concentration significantly affected the size of chitosan nanoparticles. The adequacy of the predictive model equation for predicting the magnitude orders of the size of chitosan nanoparticles was verified effectively by the validation data. Immobilization conditions were investigated as well. The minimum particles size was about 42 +/- 5 nm under the optimized conditions. The optimal conditions of immobilization were as follows: one milligram of neutral proteinase was immobilized on chitosan nanoparticles for about 15 min at 40 degrees C. Under the optimized conditions, the enzyme activity yield was 84.3%.

Four distinct types of autocorrelograms were observed using high-frequency vertical velocity data measured at 100 m above a flat terrain. Several types of nonstationary atmospheric motions due to low frequency fluctuations were examined. Under nighttime stable conditions, these phenomena were found to lead to abnormally slow exponential decay of the autocorrelation function. Several different techniques for estimating Eulerian integral time scales were compared in order to select an appropriate method of estimation. When grouped by stability classes, the Eulerian integral time scales decrease slightly with increasing stability, but generally exhibit no significant correlation with other meteorological parameters. Using a postulated relation, estimates of the Lagrangian to Eulerian integral time scale ratio range from 3 to 5 under unstable conditions and 15 to 25 under stable conditions. Under unstable conditions the average Lagrangian integral time scale is on the order of 40 s and exhibits no significant correlation with several pertinent meteorological parameters. Under stable conditions, the Lagrangian integral time scale correlates well with the Monin-Obukhov length and temperature lapse rate.