Search

The application of multiple fibres for the conformal irradiation of tumours by laser-induced interstitial thermotherapy (LITT) has been investigated. A study was performed to evaluate the coagulated zones produced in porcine muscle tissue in vitro. For delivering specified powers into the tissue, a multifibre system was developed which allows the simultaneous use of up to four fibres. A new quantitative method of magnetic resonance imaging (MRI) has been applied for real-time thermometry. It is based on the temperature dependence of the T1 relaxation time and the equilibrium magnetisation. The MR results were compared with the measurements of fibreoptic thermometers. Since the acquisition time of the selected MR sequence takes only 3 s per slice and the calculation of the temperature measurement could be realised within a few seconds, the temperature mapping works closely to real time. The accuracy of the temperature measurements in muscle tissue was 1.5°C. Whereas single-fibre applications induced convex-shaped isotherms, concave structures were generated by a multifibre LITT.

Caries – the most frequent cause for dental surgery – still is mainly treated with conventional mechanical drills, although lasers have meanwhile been successfully applied to various clinical disciplines. Since ultrashort laser pulses with sufficient pulse energies have only been available at low repetition rates (< 1 kHz) in recent decades, solely continuous wave radiation or pulse durations longer than thermal diffusion processes were applied with the result of severe thermal damage and pain. In this report we present results on dental tissue ablation obtained with a novel thin disk Yb:KYW regenerative amplifier system that does not require chirped pulse amplification (CPA). We show that femtosecond laser pulses provide us with today’s optimal tool to treat dental decay in an acceptable time, in an excellent quality, and with unsurpassed caries selectivity. The superior quality is a result of the non-thermal laser-tooth interaction. All our results are based on environmental scanning electron microscopy.

Plasma-mediated ablations of brain tissue have been performed using picosecond laser pulses obtained from a Nd:YLF oscillator/regenerative amplifier system. The laser pulses had a pulse duration of 35 ps at a wavelength of 1.053 µm. The pulse energy varied from 90 µJ to 550 µJ at a repetition rate of 400 Hz. The energy density at the ablation threshold was measured to be 20 J/cm2. Comparisons have been made to 19 ps laser pulses at 1.68 µm and 2.92 µm from an OPG/OPA system and to microsecond pulse trains at 2.94 µm from a free running Er:YAG laser. Light microscopy and scanning electron microscopy were performed to judge the depth and the quality of the ablated cavities. No thermal damage was induced by either of the picosecond laser systems. The Er:YAG laser, on the other hand, showed 20 µm wide lateral damage zones due to the longer pulse durations and the higher pulse energies.