Search

In the context of sustainability in the civil engineering industry, chemical ground improvement is becoming increasingly used, as a generally more sustainable alternative to replacing and landfilling unsuitable for construction ground. However, traditional soil stabilisers such as Portland cement or lime are not environmentally impact-free; international research effort is thus focusing on the development of innovative cementing agents. This paper presents results from a feasibility study on the development of suitable alkali-activated slag cements for the stabilisation of two soils. A number of alkali-activators were considered, comprising potassium hydroxide, a range of alkali salts, as well as a material retrieved from waste (Paper Sludge Ash, PSA) which contains free lime. Indicative results of an extensive parametric study in terms of unconfined compressive strength (UCS) are shown, followed by results of ongoing oedometer tests to determine soil compressibility and some preliminary tests on selected soil/binder mixes to observe the durability to wetting-drying cycles. Overall, all alkali-activated cement mixes increased the UCS and stiffness of the soil. Carbonates and Na2SiO3 used on their own gave lower strength increases. The highest strengths were achieved from AAC with KOH and Ca(OH)2 from PSA, which showed similar strength gain. The latter material has shown consistently a lot of promise in terms of strength, stiffness and volumetric stability of the soil as well as treatment durability. Ongoing research focuses on further mix optimisation and a comprehensive mechanical and durability property testing supported by material analysis (mineralogical, chemical and microstructural) to gain a better understanding of the complex mechanisms involved.

The paper reviews the common techniques of volume change measurement during unsaturated soil testing, focusing in particular on a newly developed system by the authors. The advantages and accuracy of the system compared to other available volume measurement techniques are discussed. This is followed by the application of the system to the volume change measurement of a lime-treated clay soil during suction-controlled triaxial testing, and a discussion on the behaviour of the soil during shearing.

The paper presents a laboratory investigation, which quantified the beneficial effect of lime on the water retention, compressibility and overall volume changes of a high plasticity clay (London Clay). The study comprised oedometer testing (including suction controlled testing), shrinkage tests, and filter paper testing to determine the soil water retention curves of the drying soils. The latter tests showed that the shallow-mixed lime-treated soils are likely to be partially saturated in situ depending on the environmental conditions; thus, unsaturated soil mechanics concepts are applicable for the description of their behaviour. The oedometer results quantified the marked decrease in the swelling and compressibility of the lime-treated soil compared to the untreated clay and the increase in the vertical effective yield stress (due to suction and cementation bonding). The lime enabled the soil to maintain a more open structure with respect to the untreated soil throughout the compression process, and appears to be the main factor influencing the compressibility of the unsaturated lime-treated soil (rather than suction) for the ranges of suction tested.