Search

Conductive hydrogels that are highly elastic, fatigue resistant and environmentally adaptive are promising materials in the fields of wearable electronics, bioelectronics and soft robotics. However, these materials are challenging to develop, especially for use in harsh environments including organic solvents and extreme temperatures. Here we report a simple method for the fabrication of highly compressible and fatigue-resistant conductive hydrogels with reinforced-concrete-type constituents and high-tortuosity interconnected cellular architecture through a self-assembly and two-stage in situ polymerization process. The obtained composites exhibit excellent mechanical compressibility with negligible residual strain at 50% strain for >104 cyclic loadings both in air and water. Due to the structure-favoured anisotropic response to tensile deformations coupled with elastic recovery, the hydrogel is endowed with sensing dimensions which allow the direction and velocity of movement on the sensor surface to be distinguished. In addition, by interpenetrating with an oleophilic polymer network, highly elastic and adaptive organohydrogels are developed with outstanding sensing performance in a wide variety of organic solvents and cryogenic temperatures. These materials may therefore be suitable for use in flexible and wearable devices in harsh environments.

Finding highly efficient hydrogen evolution reaction (HER) catalysts is pertinent to the ultimate goal of transformation into a net-zero carbon emission society. The design principles for such HER catalysts lie in the well-known structure-property relationship, which guides the synthesis procedure that creates catalyst with target properties such as catalytic activity. Here we report a general strategy to synthesize 10 kinds of single-atom-doped CoSe2-DETA (DETA = diethylenetriamine) nanobelts. By systematically analyzing these products, we demonstrate a volcano-shape correlation between HER activity and Co atomic configuration (ratio of Co-N bonds to Co-Se bonds). Specifically, Pb-CoSe2-DETA catalyst reaches current density of 10 mA cm−2 at 74 mV in acidic electrolyte (0.5 M H2SO4, pH ~0.35). This striking catalytic performance can be attributed to its optimized Co atomic configuration induced by single-atom doping.

High-performance functional fibers play a critical role in various indispensable fields, including sensing, monitoring, and display. It is desirable yet challenging to develop conductive fibers with excellent mechanical properties for practical applications. Herein, inspired by the exquisite fascicle structure of skeletal muscle, we constructed a high-performance bacterial cellulose (BC)/carbon nanotube (CNT) conductive fiber through in situ biosynthesis and enhancement of structure and interaction. The biosynthesis strategy achieves the in situ entanglement of CNTs in the three-dimensional network of BC through the deposition of CNTs during the growth of BC. The structure enhancement through physical wet drawing and the interaction enhancement through chemical treatment facilitate orientation and bridging of components, respectively. Owing to the ingenious design, the obtained composite fibers integrate high strength (939 MPa), high stiffness (52.3 GPa), high fatigue resistance, and stable electrical performance, making them competitive for constructing fiber-based smart devices for practical applications.

Designing polytypic homojunction is an efficient way to regulate photogenerated electrons and holes, thereafter bringing desired physical and chemical properties and being attractive photocatalysts for solar-to-hydrogen conversion. However, the high-yield and controllable synthesis of well-defined polytypes especially for multinary chalcogenide - the fundamental factor favoring highly efficient solar-to-hydrogen conversion - has yet to be achieved. Here, we report a general colloidal method to construct a library of polytypic copper-based quaternary sulfide nanocrystals, including Cu2ZnSnS4, Cu2CdSnS4, Cu2CoSnS4, Cu2MnSnS4, Cu2FeSnS4, Cu3InSnS5 and Cu3GaSnS5, which can be synthesized by selective epitaxial growth of kesterite phase on wurtzite structure. Besides, this colloidal method allows the precise controlling of the homojunction number corresponding to the photocatalytic performance. The single-homojunction and double-homojunction polytypic Cu2ZnSnS4 nanocrystal photocatalysts show 2.8-fold and 3.9-fold improvement in photocatalytic hydrogen evolution rates relative to the kesterite nanocrystals, respectively. This homojunction existed in the polytypic structure opens another way to engineer photocatalysts.

Conductive and adhesive hydrogels are promising materials for designing bioelectronics. To satisfy the high conductivity of bioelectronic devices, metal nanomaterials have been used to fabricate composite hydrogels. However, the fabrication of a conductive-nanomaterial-incorporated hydrogel with high performance is a great challenge because of the easy aggregation nature of conductive nanomaterials making processing difficult. Here, we report a kind of adhesive aero-hydrogel hybrid conductor (AAHC) with stretchable, adhesive and anti-bacteria properties by in situ formation of a hydrogel network in the aerogel-silver nanowires (AgNWs) assembly. The AgNWs with good conductivity are well-integrated on the inner-surface of shape-memory chitosan aerogel, which created a conductive framework to allow hydrogel back-filling. Reinforcement by the aerogel-silver makes the hybrid hydrogel tough and stretchable. Functional groups from the hydrogel allow strong adhesion to wet tissues through molecular stitches. The inherent bacteria-killing ability of silver ions endows the conductive hydrogel with excellent anti-bacteria performance. The proposed facile strategy of aerogel-assisted assembly of metal nanomaterials with hydrogel opens a new route to incorporate functional nanoscale building blocks into hydrogels.

Introducing heating function to oil sorbents opens up a new pathway to the fast cleanup of viscous crude oil spills in situ. The oil sorption speed increases with the rise of the temperature, thus oil sorbents with high heating temperature are desirable. Besides, the oil sorbents also need to be produced environment-friendly. Here we present carbonized melamine-formaldehyde sponges (CMSs) that exhibited superior heating performance and the CMSs could be massively fabricated through a non-polluting pyrolysis process. The conductive CMSs could be heated over 300 °C with a low applied voltage of 6.9 V and keep above 250 °C for 30 min in the air without obvious damage. Such high heating performance enabled heating up the oil spills with a high rate of 2.65 °C·s−1 and 14% improvement of oil sorption coefficient compared with the state-of-the-art value. We demonstrated that one joule-heated CMS could continuously and selectively collect viscous oil spills (9,010 mPa·s) 690 times its own weight in one hour. The CMSs will be a highly competitive sorbent material for the fast remediation of future crude oil spills.

Siloxane rubber shows attractive properties of high stability, elasticity and transparency. Besides, the regulation of its properties renders it widely used in many application fields. However, most of the reported performance improvement methods of siloxane rubber focus on the change of chemical composition of siloxane rubber, including the design of molecular chain and the introduction of other compounds, etc. Such a strategy is still faced with many limitations in practical application. In this work, on the premise of not changing the chemical composition of siloxane rubber, we propose a facile solvothermal polymerization process to change the structure of cross-linking networks, so as to obtain the siloxane rubber with controllable mechanical properties. Compared to the normal curing method, we realized polydimethylsiloxane elastomer (PDMS) with maximum elongation of more than 3,000% (> 10 times of normally cured one) and tensile modulus lower than 0.15 MPa (< 1/10 of normally cured one). In addition to superior stretchability, it gains extra high softness, stickiness and sensitive response to organic solvents. Based on our solvothermal cured PDMS, its applications in oil collection and organic solvent sensor have been demonstrated. It is expected that this method can be readily utilized widely and shows great application potentials.

Lightweight yet strong paper with high toughness is desirable especially for impact protection. Herein we demonstrated electrically conductive and mechanically robust paper (AP/PB-GP) made of reduced graphene oxide via interfacial crosslinking with 1-aminopyrene (AP) and 1-pyrenebutyrat (PB) small molecules. The AP/PB-GP with thickness of over ten micrometer delivers a record-high toughness (∼69.67 ± 15.3 MJ m−3 in average), simultaneously with superior strength (close to 1 GPa), allowing an impressive specific penetration energy absorption (∼0.17 MJ kg−1) at high impact velocities when used for ballistic impact protection. Detailed interfacial and structural analysis reveals that the reinforcement is synergistically determined by π-π interaction and H-bonding linkage between adjacent graphene lamellae. Especially, the defective pores within the graphene platelets benefit the favorable adsorption of the pyrene-containing molecules, which imperatively maximizes the interfacial binding, facilitating deflecting crack and plastic deformation under loading. Density functional theory simulation suggests that the coupling between the polar functional groups, e.g., −COOH, at the edges of graphene platelets and −NH2 and −COOH of AP/PB are critical to the formation of hydrogen bonding network.

Magnesium calcite (Mg-calcite) mesocrystal is widespread in the biominerals with specific functions. Until now, it remains challenging to obtain Mg-calcite mesocrystals without organic additives and the formation mechanism of Mg-calcite mesocrystals in the ocean is not clear yet. We report here the synthesis of corn-like Mg-calcite mesocrystals from pure amorphous calcium carbonate (ACC) via a facile method only by using Ca2+ and Mg2+. The obtained Mg-calcite is composed of many nanocubes with common crystallographic orientation, which shows very good single crystal feature. In the crystallizing procedure, the ACC nanospheres rapidly agglomerate into Mg-calcite corn-like mesocrystal by oriented attachment (OA) in a certain direction, which belongs to the non-classical nucleation. By this method, the molar ratio of Ca2+ and Mg2+ plays a vital role in the whole crystallization procedure, which may shed a new light on disclosing the mechanism behind for the effect of seawater in the formation of biological Mg-calcite in nature.

Although nickel-based catalysts display good catalytic capability and excellent corrosion resistance under alkaline electrolytes for water splitting, it is still imperative to enhance their activity for real device applications. Herein, we decorated Ni0.85Se hollow nanospheres onto reduced graphene oxide (RGO) through a hydrothermal route, then annealed this composite at different temperatures (400 °C, NiSe2-400 and 450 °C, NiSe2-450) under argon atmosphere, yielding a kind of NiSe2/RGO composite catalysts. Positron annihilation spectra revealed two types of vacancies formed in this composite catalyst. We found that the NiSe2-400 catalyst with dual Ni-Se vacancies is able to catalyze the oxygen evolution reaction (OER) efficiently, needing a mere 241 mV overpotential at 10 mA·cm−2. In addition, this catalyst exhibits outstanding stability. Computational studies show favorable energy barrier on NiSe2-400, enabling moderate OH− adsorption and O2 desorption, which leads to the enhanced energetics for OER.

Printable elastic conductors promote the wide application of consumable electronic textiles (e-textiles) for pervasive healthcare monitoring and wearable computation. To assure a clean appearance, the e-textiles require a washing process to clean up the dirt after daily use. Thus, it is crucial to develop low-cost printable elastic conductors with strong adhesion to the textiles. Here, we report a composite elastic conductor based on Ag nanowires (NWs) and polyurethane elastomer. The composite could be dispersed into ink and easily printed onto textiles. One-step print could form robust conductive coatings without sealing on the textiles. Interestingly, the regional concentration of Ag NWs within the polyurethane matrix was observed during phase inversion, endowing the elastic conductor with a low percolation threshold of 0.12 vol.% and high conductivity of 3,668 S·cm−1. Thanks to the high adhesion of the elastic conductors, the resulted e-textiles could withstand repeated stretching, folding, and machine washing (20 times) without obvious performance decay, which reveals its potential application in consumable e-textiles.

The increasing demand for the state-of-the-art transparent conductive electrodes has received great interest in synthesizing silver nanowires (AgNWs) with a uniform diameter that exhibit excellent conductance, transparency, flexibility and mechanical ductility. Herein, we report the controllable synthesis of ultrathin AgNWs with high aspect ratio via a polyol-assisted process. The diameter of AgNWs can be continuously modulated from 20 to 80 nm by simply adjusting the aging time. The self-assembled films fabricated by using AgNWs with a diameter of 20 nm as building blocks enable an excellent performance and show a sheet resistance of ∼30 Ω/sq and an optical transmittance of 94%. In addition, such nanowire-based conductive films can keep the excellent flexibility and resistance after bending 10,000 cycles. Similarly, the intelligent dimming films prepared by this AgNW films also have excellent flexibility and stability.

The high surface energy of nanomaterials endows them a metastable nature, which greatly limits their application. However, in some cases, the degradation process derived from the poor stability of nanomaterials offers an unconventional approach to design and obtain functional nanomaterials. Herein, based on the poor stability of ZnSe-[DETA]0.5 hybrid nanobelts, we developed a new strategy to chemically graphitize and functionalize graphene oxide (GO). When ZnSe[DETA]0.5 hybrid nanobelts encountered a strong acid, they were attacked by H+ cations and could release highly reactive Se2− anions into the reaction solution. Like other common reductants (such as N2H4·H2O), these Se2− anions exhibited an excellent ability to restore the structure of GO. The structural restoration of GO was greatly affected by the reaction time, the volume of HCl, and the mass ratio between GO and ZnSe[DETA]0.5 nanobelts. By carefully controlling the reaction process and the post-processing process, we finally obtained several Se-based reduced GO (RGO) nanocomposites (such as ZnSe/Se-RGO, ZnSe-RGO, and Se-RGO) and various selenide/metal-RGO nanocomposites (such as Ag2Se-RGO, Cu2Se-RGO, and Pt-RGO). Although the original structure and composition of ZnSe[DETA]0.5 nanobelts are destroyed, the procedure presents an unconventional way to chemically graphitize and functionalize GO and thus provides a new material synthesis platform for nanocomposites.

Photoelectrochemical (PEC) hydrogen production is of great interest as an ideal avenue towards clean and renewable energy. However, the instability and low energy conversion efficiency of photoanodes hinder their practical applications. Here we address these issues by introducing a hole extraction layer (HEL) which could rapidly transfer and consume photogenerated holes. The HEL is constructed by reduced graphene oxide (RGO) and other cocatalysts that enable rapid transfer and subsequent consumption of holes, respectively. Specifically, we showcase a high-stability photoanode composed of CdSeTe nanowires (CST NWs) and RGO/PdS nanoparticles (PdS NPs) based HEL. The photoanode achieves excellent photocorrosion resistance, which allows stable hydrogen evolution for > 2 h at 0.5 VRHE.

Owing to the stimulus-responsive and dynamic properties, magnetism-driven assembly of building blocks to form ordered structures is always a marvelous topic. While abundant magnetic assemblies have been developed in ideal physical and chemical conditions, it remains a challenge to realize magnetic assembly in complicated biological systems. Herein, we report a kind of biomacromolecule-modified magnetic nanosheets, which are mainly composed of superparamagnetic graphene oxide (γ-Fe2O3@GO), the tumor-targeting protein transferrin (TF), and the mitochondrion-targeting peptide (MitP). Such large-size nanosheets (0.5–1 μm), noted as L-Fe2O3@GO-MitP-TF, can successfully in situ assemble on the surface of tumor cells in a size-dependent and tumor cell-specific way, leading to severe inhibition of nutrient uptake for the tumor cells. More significantly, the nanostructures could efficiently confine the tumor cells, preventing both invasion and metastasis of tumor cells both in vitro and in vivo. Moreover, the 2D assemblies could remarkably disrupt the mitochondria and induce apoptosis, remarkably eradicating tumors under near-infrared (NIR) irradiation. This study sheds light on the development of new nano-systems for efficient cancer therapy and other biomedical applications.

Chirality-the property of an object wherein it is distinguishable from its mirror image-is of widespread interest in chemistry and biology1-6. Regioselective magnetization of one-dimensional semiconductors enables anisotropic magnetism at room temperature, as well as the manipulation of spin polarization-the properties essential for spintronics and quantum computing technology7. To enable oriented magneto-optical functionalities, the growth of magnetic units has to be achieved at targeted locations on a parent nanorod. However, this challenge is yet to be addressed in the case of materials with a large lattice mismatch. Here, we report the regioselective magnetization of nanorods independent of lattice mismatch via buffer intermediate catalytic layers that modify interfacial energetics and promote regioselective growth of otherwise incompatible materials. Using this strategy, we combine materials with distinct lattices, chemical compositions and magnetic properties, that is, a magnetic component (Fe3O4) and a series of semiconducting nanorods absorbing across the ultraviolet and visible spectrum at specific locations. The resulting heteronanorods exhibit optical activity as induced by the location-specific magnetic field. The regioselective magnetization strategy presented here enables a path to designing optically active nanomaterials for chirality and spintronics.

Efficient initiation and resolution of inflammation are crucial for wound repair. However, with using tissue adhesives for wound repair, patients occasionally suffered from delayed healing process because slow elimination of those exogenous adhesives generally leads to chronic inflammation. As the demand for minimal invasive therapy continues to rise, desire for adhesive materials that can effectively reconnect surgical gaps and promote wound regeneration becomes increasingly urgent. Herein, by exploiting the inherent porous structure and performance of adhesion to tissue of mesoporous silica nanoparticles (MSNs), we demonstrate a tissue adhesive that can elicit acute inflammatory response and get eliminated after tissue reformation. With formation of nanocomposites in wound gaps, the injured tissues can get reconnected conveniently. The resultant accelerated healing process verify that the strategy of exploiting unique properties of nanomaterials can effectively promote inflammation resolution and wound repair. This design strategy will inspire more innovative tissue adhesives for clinical applications.

In the past two decades, the field of surface-enhanced Raman scattering (SERS) has flourished and many rational strategies have been reported for the successful construction of SERS substrates. However, it still lacks the mass-production and programmability for practical applications with arbitrary configurations, and it is highly desirable to develop SERS substrates with strong signal enhancement, large-scale surface area, easy fabrication and low cost. Herein, we demonstrate a large-area fabrication (1.5 m × 5 m) of low-cost (18.8 dollars per square meter), highly sensitive, flexible and transparent SERS substrate by a simple solution process. The high sensitivity of SERS substrate using 3,3′-diethylthiatricarbocyanine iodide (DTTCI) as probe molecules is strongly dependent on the density and diameter of gold nanoparticles (NPs) on the surface of nylon mesh with the best enhancement factor (EF) of 9.17 × 1010 and the SERS detection limit of DTTCI molecules is as low as 10-14 M which shows no obvious degradation even after 10,000 cycles of fatigue test, high temperature (above than 160 °C) and acid-alkali treatment, indicating their excellent stability for the performance in all climates.

Hydroxide exchange membrane fuel cells offer possibility of adopting platinum-group-metal-free catalysts to negotiate sluggish oxygen reduction reaction. Unfortunately, the ultrafast hydrogen oxidation reaction (HOR) on platinum decreases at least two orders of magnitude by switching the electrolytes from acid to base, causing high platinum-group-metal loadings. Here we show that a nickel-molybdenum nanoalloy with tetragonal MoNi4 phase can catalyze the HOR efficiently in alkaline electrolytes. The catalyst exhibits a high apparent exchange current density of 3.41 milliamperes per square centimeter and operates very stable, which is 1.4 times higher than that of state-of-the-art Pt/C catalyst. With this catalyst, we further demonstrate the capability to tolerate carbon monoxide poisoning. Marked HOR activity was also observed on similarly designed WNi4 catalyst. We attribute this remarkable HOR reactivity to an alloy effect that enables optimum adsorption of hydrogen on nickel and hydroxyl on molybdenum (tungsten), which synergistically promotes the Volmer reaction., The lack of efficient and cost-effective catalysts for hydrogen oxidation reaction (HOR) hampers the application of hydroxide exchange membrane fuel cells. Here, authors reported bimetallic MoNi4 and WNi4 nanoalloys with marked HOR activity in alkali, among which MoNi4 outperforms the Pt/C catalyst.

The electrosynthesis of higher-order alcohols from carbon dioxide and carbon monoxide addresses the need for the long-term storage of renewable electricity; unfortunately, the present-day performance remains below what is needed for practical applications. Here we report a catalyst design strategy that promotes C3 formation via the nanoconfinement of C2 intermediates, and thereby promotes C2:C1 coupling inside a reactive nanocavity. We first employed finite-element method simulations to assess the potential for the retention and binding of C2 intermediates as a function of cavity structure. We then developed a method of synthesizing open Cu nanocavity structures with a tunable geometry via the electroreduction of Cu2O cavities formed through acidic etching. The nanocavities showed a morphology-driven shift in selectivity from C2 to C3 products during the carbon monoxide electroreduction, to reach a propanol Faradaic efficiency of 21 ± 1% at a conversion rate of 7.8 ± 0.5 mA cm−2 at −0.56 V versus a reversible hydrogen electrode. The production of higher alcohols is very valuable because of their high volumetric energy density. Now, Sargent, Sinton and co-workers report the design of copper nanoparticles with tailored nanocavities that promote n-propanol formation by the coupling of C2 and C1 intermediates inside the cavity.

Engineering copper-based catalysts that favour high-value alcohols is desired in view of the energy density, ready transport and established use of these liquid fuels. In the design of catalysts, much progress has been made to target the C–C coupling step; whereas comparatively little effort has been expended to target post-C–C coupling reaction intermediates. Here we report a class of core–shell vacancy engineering catalysts that utilize sulfur atoms in the nanoparticle core and copper vacancies in the shell to achieve efficient electrochemical CO2 reduction to propanol and ethanol. These catalysts shift selectivity away from the competing ethylene reaction and towards liquid alcohols. We increase the alcohol-to-ethylene ratio more than sixfold compared with bare-copper nanoparticles, highlighting an alternative approach to electroproduce alcohols instead of alkenes. We achieve a C2+ alcohol production rate of 126 ± 5 mA cm−2 with a selectivity of 32 ± 1% Faradaic efficiency. The conversion of carbon dioxide into multi-carbon alcohols would enable the synthesis of sustainable liquid fuels with high energy densities. Now, vacancy-engineered core–shell copper-based catalysts are able to shift the selectivity of electrochemical CO2 reduction into alcohols instead of alkenes, as obtained with bare-copper catalysts.

Nanowire devices have attracted considerable attention because of their unique structure and novel properties, and have opened up significant development opportunities. However, not many studies have focused on their stability and durability under practical conditions, which limits the rapid development of real applications. Herein, we systematically investigate three different treatments,polymer coating, inert atmosphere protection, and thickness-induced self-protection, to protect the tellurium nanowire devices from oxidation when exposed to open air. The degree of oxidation was monitored by examining changes in the valence states of tellurium element and in the morphology of the nanowires. After the protective treatments, the tellurium nanowire devices showed improved stability and remained stable even after 800 days of storage. This work highlights the importance of investigating the stability of nanowire devices, especially for their practical applications.

Calcium carbonate-doxorubicin@silica-indocyanine green nanospheres with high uniformity and monodispersity were designed and synthesized, in order to provide a photo-triggered strategy for drug-resistant cancer therapy. Under near-infrared laser irradiation, the nanospheres transformed laser power into local heat and reactive oxygen species via the connected indocyanine green molecule, thus exhibiting photothermal and photodynamic effects. Moreover, the photo-triggered drug release based on calcium-assisted silica degradation was observed, endowing the nanospheres with chemotherapeutic properties. Finally, combined therapeutic effects against drug-resistant human breast cancer cells were successfully obtained. These photo-triggered materials based on calcium carbonate could provide a promising platform for enhanced multimodal cancer therapies.

Stretchable electronics are in high demand for next-generation wearable devices, but their fabrication is still challenging. Stretchable conductors, flexible pressure sensors, and foldable light-emitting diodes (LEDs) have been reported; however, the fabrication of stable stretchable batteries, as power suppliers for wearable devices, is significantly behind the development of other stretchable electronics. Several stretchable lithium-ion batteries and primary batteries have been fabricated, but their low capacities and complicated manufacturing processes are obstacles for practical applications. Herein, we report a stretchable zinc/manganese-oxide (Zn-MnO2) full battery based on a silver-nanowire-coated sponge prepared via a facile dip-coating process. The spongy electrode, with a three-dimensional (3D) binary network structure, provided not only high conductivity and stretchability, but also enabled a high mass loading of electrochemically active materials (Zn and MnO2 particles). The fabricated Zn-MnO2 battery exhibited an areal capacity as high as 3.6 mAh·cm−2 and could accommodate tensile strains of up to 100% while retaining 89% of its original capacity. The facile solution-based strategy of dip-coating active materials onto a cheap sponge-based stretchable current collector opens up a new avenue for fabricating stretchable batteries.

Although remarkable progress has been witnessed in mimicking the nacre-like architecture in laboratory, it remains a great challenge for understanding the unique balancing mechanism of toughness and strength in biological materials. Here, taking advantage of the synergistic effect of different dimensional nanoscale building blocks, we fabricate nacre-like films that reconcile high strength and toughness. The obtained ternary lamellar composite films are constructed by one-dimensional xonotlite nanowires and two-dimensional montmorillonite nanosheets with the assistance of poly(vinyl alcohol). The ternary composite films show high strength ( (241.8±10.2) MPa ) and toughness ( (5.85±0.46) MJ m–3 ), both of which are higher than that of the single nanofibrillar xonotlite network films or the binary montmorillonite/poly(vinyl alcohol) composite films. The excellent mechanical properties of the nacre-like ternary composite films are aroused by the synergistic toughening mechanism of the different dimensional building blocks. This strategy provides a facile approach to integrate the nacre-like composite films with potential applications in tissue engineering scaffold, strong air barrier coatings, and fire-retardant packing materials.

High-performance composites containing various kinds of nanofibers as reinforcing building blocks have recently received considerable attention, owing to their superior mechanical properties. One of the effective strategies to reinforce these composites involves strengthening interfacial interactions via covalent bonds. However, in contrast to nanosheets, covalent bonds have been rarely used in nanofiber-reinforced composites. Herein, we report the macroscale fabrication of a series of Ag nanowire (NW)-thiolated chitosan (TCS) composite films via spray induced self-assembly. The obtained films were significantly strengthened by Ag–S covalent bonds formed between the Ag NWs and the thiol groups of TCS. The tensile strength of the optimized Ag NW-TCS film was up to 3.9 and 1.5 times higher compared with that of pure TCS and Ag NW-chitosan (CS) films, respectively.

One-dimensional hollow nanostructures have potential applications in many fields and can be fabricated using various methods. Herein, a selective-oxidation route for the synthesis of unique Te x Se y nanotubes (STNTs) with a controlled morphology using Te x Se y @Se core–shell nanowires (TSSNWs) as a template is reported. Because of the lower redox potential of TeO2/Te compared to that of H2SeO3/Se, the Te in TSSNWs can be preferentially oxidized by an appropriate oxidant of HNO2 to form STNTs. The inner diameters and wall thicknesses of the STNTs can be tuned by modulating the core diameters and shell thicknesses of the TSSNWs, respectively. The STNTs can be assembled into a monolayer composed of well-arranged nanotubes using the Langmuir–Blodgett technique. A device based on films stacked with 10 STNT monolayers was fabricated to investigate the photocoductivity of the STNTs. The STNTs exhibited a good photoresponse over the whole ultraviolet–visible spectrum, revealing their potential for application in optoelectronic devices.

Lithium-ion batteries (LIBs) are currently recognized as one of the most popular power sources available. To construct advanced LIBs exhibiting long-term endurance, great attention has been paid to enhancing their poor cycle stabilities. As the performance of LIBs is dependent on the electrode materials employed, the most promising approach to improve their life span is the design of novel electrode materials. We herein describe the rational design of a three-dimensional (3D) porous MnO/C-N nanoarchitecture as an anode material for long cycle life LIBs based on their preparation from inexpensive, renewable, and abundant rapeseed pollen (R-pollen) via a facile immersion-annealing route. Remarkably, the as-prepared MnO/C-N with its optimized 3D nanostructure exhibited a high specific capacity (756.5 mAh·g−1 at a rate of 100 mA·g−1), long life span (specific discharge capacity of 513.0 mAh·g−1, ~95.16% of the initial reversible capacity, after 400 cycles at 300 mA·g−1), and good rate capability. This material therefore represents a promising alternative candidate for the high-performance anode of next-generation LIBs.

Arm symmetrical PbS dendrite (ASD-PbS) nanostructures can be prepared on a large scale by a solvothermal process. The ASD-PbSs exhibit a three-dimensional symmetrical structure, and each dendrite grows multiple branches on the main trunk. Such unique ASD-PbSs can be combined with polyvinylidene fluoride (PVDF) to prepare a composite material with enhanced dielectric and microwave-absorption properties. A detailed investigation of the dependence of the dielectric properties on the frequency and temperature shows that the ASD-PbS/PVDF composite has an ultrahigh dielectric constant and a low percolation threshold. The dielectric permittivity is as high as 1,548 when the concentration of the ASD-PbS filler reaches 13.79 vol.% at 102 Hz, which is 150 times larger than that of pure PVDF, while the composite is as flexible as pure PVDF. Furthermore, the maximum reflection loss can reach–36.69 dB at 16.16 GHz with a filler content of only 2 wt.%, which indicates excellent microwave absorption. The loss mechanism is also elucidated. The present work demonstrates that the addition of metal sulfide microcrystals to polymer matrix composites provides a useful method for improving the dielectric and microwave-absorption properties.

Perovskite materials, such as Ba x Sr1− x TiO3 (BST), have been continuously receiving attentions due to their unique ferroelectric, pyroelectric, dielectric, piezoelectric and electric-optic properties. Here, we report a facile route for the synthesis of BST nanocrystalline materials by fast mixing of MCl2 (M = Ba, Sr) aqueous solution and titanium isopropoxide ethanol solution at room temperature without using any surfactants or structure-directing templates. The molar ratio of Ba/Sr was controlled by adjusting the original molar ratio of BaCl2·2H2O and SrCl2·6H2O. The dielectric properties and microwave absorption capability of the BST nanocrystalline were studied. The results indicate that the BST nanocrystalline material has the best dielectric and microwave absorption properties in the case of Ba0.7Sr0.3TiO3. The present strategy is facile, low cost and high yield, which may provide a new route for the synthesis of other perovskite materials.

The shape-controlled silver nanostructures have been widely used for template synthesis of metal nanostructures with desired morphologies and compositions for specific applications by galvanic replacement reaction, while the silver is sacrificed as oxidized to silver ion and abandoned as by-products. In view of the broad application prospect of the obtained metal nanostructures, the cost and environment problems after the template reactions should be taken into account for the large scale production in the future. To solve this problem, we conceptually demonstrate that the wasted AgCl generated from the template reactions can be easily recycled for the synthesis of valuable Ag nanowires. As representative examples, the average recovery of silver can be about 69.8%–84.6% after the template synthesis of Au/Pt nanostructures. The resynthesized Ag nanowires show uniform size distribution and excellent physical and chemical properties for the fabrication of transparent electrode and template synthesis.

Photocatalytic CO2 reduction on metal-oxide-based catalysts is promising for solving the energy and environmental crises faced by mankind. The oxygen vacancy (V o) on metal oxides is expected to be a key factor affecting the efficiency of photocatalytic CO2 reduction on metal-oxide-based catalysts. Yet, to date, the question of how an V o influences photocatalytic CO2 reduction is still unanswered. Herein, we report that, on V o-rich gallium oxide coated with Pt nanoparticles (V o-rich Pt/Ga2O3), CO2 is photocatalytically reduced to CO, with a highly enhanced CO evolution rate (21.0 μmol·h−1) compared to those on V o-poor Pt/Ga2O3 (3.9 μmol·h−1) and Pt/TiO2(P25) (6.7 μmol·h−1). We demonstrate that the V o leads to improved CO2 adsorption and separation of the photoinduced charges on Pt/Ga2O3, thus enhancing the photocatalytic activity of Pt/Ga2O3. Rational fabrication of an V o is thereby an attractive strategy for developing efficient catalysts for photocatalytic CO2 reduction.

Forming alloys with transition metal remarkably decreases the u sage of noble metal and offers benefits for electrocatalysis. Here we introduced a mixed-solvent strategy to synthesize unique PtAuCu ternary nanotubes (NTs) with porous and rough surface, using high quality Cu nanowires (NWs) as the partial sacrificial templates. We found that Au plays a key role in the enhancement of e lectrocatalytic performance for both methanol oxidation reaction (MOR) and formic acid oxidation reaction (FAOR). The mass activities of PtAuCu NTs after acid leaching for MOR and FAOR reach 1698.8 mA mg-1Pt at 0.9 V and 1170 mA mg-1Pt at 0.65 V, respectively. Such ternary NTs show impressive stability due to the irreversibly adsorption of CO* on the Au surface instead of the active Pt surface and the excellent structure stability. The present method could be extended to prepare other new multi-functional electrocatalysts.

Epitaxially stacking colloidal quantum dots in nanowires offers a route to selective passivation of defective facets while simultaneously enabling charge transfer to molecular adsorbates – features that must be combined to achieve high-efficiency photocatalysts. This requires dynamical switching of precursors to grow, alternatingly, the quantum dots and nanowires – something not readily implemented in conventional flask-based solution chemistry. Here we report pulsed axial epitaxy, a growth mode that enables the stacking of multiple CdS quantum dots in ZnS nanowires. The approach relies on the energy difference of incorporating these semiconductor atoms into the host catalyst, which determines the nucleation sequence at the catalyst-nanowire interface. This flexible synthetic strategy allows precise modulation of quantum dot size, number, spacing, and crystal phase. The facet-selective passivation of quantum dots in nanowires opens a pathway to photocatalyst engineering: we report photocatalysts that exhibit an order-of-magnitude higher photocatalytic hydrogen evolution rates than do plain CdS quantum dots., The precise control over nanoscale structures is crucial in developing new, functional nanomaterials. Here, authors demonstrate a controllable method to epitaxially stack CdS quantum dots into ZnS nanowires and show improved photocatalytic hydrogen evolution activities.

It is still a great challenge to improve deformability and fatigue-resistance of stretchable conductors when maintaining their high-level conductivity for practical use. Herein, a high-performance stretchable conductor with hierarchically ternary network and self-healing capability is demonstrated through in situ polymerizing N-isopropylacrylamide (NIPAM) on well-defined sulfur-containing molecule-modified Ag nanowire (AgNW) aerogel framework. Owing to hierarchical architecture from nanoscale to microscale and further to macroscale and strong interactions of polymer chains and AgNWs, the composite exhibits good conductivity of 93 S cm−1, excellent electromechanical stability up to superhigh tensile strain of 800% and strong fatigue-resistant ability through well accommodating the applied deformations and sharing external force in the network. Furthermore, the composite delivers a fast and strong healing capability induced by reversible Ag–S bonds, which enables the healed conductor to hold an impressive electromechanical property. These prominent demonstrations confirm this material as top performer for use as flexible, stretchable electronic devices., Stretchable conductors are important for further developments in the electronics industry, but improving the deformability when maintaining the high-level conductivity is still challenging. Here the authors demonstrate a ternary self-healing silver nanowire/polymer network as high-performance stretchable conductor.

Even though great advances have been achieved in the synthesis of luminescent metal nanoclusters, it is still challenging to develop metal nanoclusters with high quantum efficiency as well as multiple sensing functionalities. Here, we demonstrate the rapid preparation of glutathione-capped Au/Ag nanoclusters (GS-Au/Ag NCs) using microwave irradiation and their unique sensing capacities. Compared to bare GS-Au NCs, the doped Au/Ag NCs possess an enhanced quantum yield (7.8% compared to 2.2% for GS-Au NCs). Several characterization techniques were used to elucidate the atomic composition, particulate character, and electronic structure of the fabricated NCs. According to the X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge structure (XANES) spectra, a significant amount of Au exists in the oxidized state as Au(I), and the Ag atoms are positively charged. In contrast to those nanoclusters that detect only one analyte, the GS-Au/Ag NCs can be used as a versatile sensor for metal ions, anions, and small molecules. In this manner, the NCs can be regarded as a unique sensor-on-a-nanoparticle.

The commercialization of proton exchange membrane fuel cells (PEMFCs) is still restricted by the well-known dilemma, that is, the heavy dependence of using expensive plantinum (Pt) catalyst to negotiate the sluggish oxygen reduction reaction (ORR) kinetics in fuel cell cathodes. Here, a carbon-supported PtCo2Ni2 alloy catalyst with low Pt usage was synthesized via a simple method, which exhibited exceptional ORR activity with a more positive half-wave potential ( E 1/2) ~57 mV, which was more positive than the state-of-the-art Pt/C catalysts. Moreover, the alloy catalyst performs excellent durability after 10,000 harsh cycles compared with that of Pt/C catalyst in acidic solution, which may be developed as a promising alternative for Pt-based catalysts in fuel cell technology.

The stability and reactivity of nanomaterials are of crucial importance for their application, but the long-term effects of stability and reactivity of nanomaterials under practical conditions are still not well understood. In this study, we first established a comprehensive strategy to investigate the stability of a highly reactive nanomaterial from the viewpoint of reaction kinetics with ultrathin tellurium nanowires (TeNWs) as a model material in aqueous solution through an accelerated oxidation process. This allowed us to propose a new approach for the design and synthesis of other unique one-dimensional nanostructures by a chemical transformation process using the intermediate nanostructures “captured” during the dynamic oxidation process under different conditions. In essence, the oxidation of ultrathin TeNWs is a gas-solid reaction which involves liquid, gas and solid phases. It has been demonstrated that the oxidation process of ultrathin TeNWs in aqueous solution can be divided into three stages, namely oxygen limiting, ultrathin TeNWs limiting and mass transfer resistance limiting stages. The apparent oxidation kinetics for ultrathin TeNWs is approximately in accord with a first order reaction kinetics model and has an apparent activation energy as low as 13.53 kJ·mol−1, indicating that ultrathin TeNWs are thermodynamically unstable. However, the unstable nature of ultrathin TeNWs is actually an advantage since it can act as an excellent platform to help us synthesize and design one-dimensional functional nanomaterials-with special structures and distinctive properties-which are difficult to obtain by a direct synthesis method.