Search

The radiolytic stability of aqueous solutions containing two different bis-1,2,4-triazines was studied under static gamma irradiation. Sulphophenyl derivatives of bis-1,2,4- triazinyl pyridine (SO3-Ph-BTP) and bis-1,2,4-triazinylbipyridine (SO3-Ph-BTBP) were dissolved in 0.1 M and 1 M HNO3 solutions and the impact of gamma irradiation was assessed by the measurement of distribution ratios of Am(III) and Eu(III) using irradiated samples. The results were compared for two different organic solvents containing N,N,N’,N’-tetraoctyldiglycolamide (TODGA) or N,N-didodecyl-N’,N’-dioctyldiglycolamide (D3DODGA). The separation efficiency of all the systems remained unchanged when the absorbed dose was 100 kGy, and gradually decreased at 200 kGy and 500 kGy. The radiolytic degradation was more apparent for SO3-Ph-BTBP in comparison to SO3-Ph-BTP at higher acidity. The degradation of sulphonate groups in the molecules was evidenced in ATR-FTIR spectral studies.

The selective partitioning of trivalent actinides (An(III)) from high-level liquid waste (HLLW) is considered as an essential step in the management of spent nuclear fuel. The i-SANEX process for the separation of An(III) from the co-existing lanthanides (Ln(III)) in 4 M nitric acid solution and simulated HLLW was studied using a couple of symmetrical diglycolamides (TODGA and TDDGA) and an unsymmetrical diglycolamide (D3DODGA) in n-dodecane as the extraction phase. The selective stripping of Am(III) from the loaded organic phase containing trivalent Ln(III) was investigated using aqueous soluble bis-1,2,4-triazine derivatives such as SO3-Ph-BTP, SO3-Ph-BTBP and SO3-Ph-BTPhen in dilute nitric acid solution. The results revealed that the SF of Eu(III) over Am(III) decreased with increase in the concentration of nitric acid in all cases and SF decreased in the order SO3-Ph-BTP > SO3-Ph-BTBP > SO3-Ph-BTPhen. The co-stripping of lighter lanthanides (La, Ce, Pr, Nd) was also observed during the recovery of Am(III).

Long chain monoamide extractants, N,N-di-decyloctanamide(DDOA), N,N-di-hexyldecanamide(DHDA), N,N-di-2-ethylhexyloctanamide(D2EHOA) and N,N-dihexyl-2-ethylhexanamide(DH2EHA) were synthesized and studied for the recovery of U(VI), Pu(IV) and Zr(IV) from a simulated dissolver solution of un-irradiated U–Zr metallic fuel. The results were compared with the results of N,N-dihexyloctanamide(DHOA) and tri-n-butylphosphate(TBP) under similar conditions. Solvent extraction studies were carried out for comparing the extraction behavior of U(VI), Pu(IV) and Zr(IV) in monoamide extractants with TBP system. The influence of length and branching of alkyl chains on either side of the amidic group on the extraction efficiency, third phase behaviour and metal ion selectivity in long chain monoamides has been discussed based on the results of above studies.

The extraction behaviour of Am(III) and other metal ions present in the fast reactor simulated high- level liquid waste (FR-SHLLW) was studied using a modifier-free solvent phase composed of N,N-di-octyl-2-hydroxyacetamide (DOHyA) in n-dodecane. Quantitative extraction of Am(III) was achieved with the co-extraction of all lanthanides, Y(III) and Mo(VI) in the first five stages of a 20-stage mixer-settler. During the stripping run with 0.5 M HNO3, Am(III), Ln(III) and Y(III) were quantitatively transferred to the aqueous product in three stages. The other extracted metal ions were retained in organic phase. The results showed that the extraction performance of DOHyA was superior to other amide extractant systems reported in the literature.

The radiation stability of N,N-di-alkyl-2-hydroxyacetamide derivatives having alkyl side chain varying from hexyl to decyl was studied as a function of absorbed dose of gamma irradiation up to 700 kGy. The samples were irradiated as neat, and as 0.2 M solutions in n-dodecane in the presence and absence of 4 M nitric acid. The radiolytic degradation of the compounds were assessed by the measurement of distribution ratio of Am(III) (DAm(III)) and also by the measurement of hydrodynamic properties such as density, viscosity and phase disengagement time.