Search

Purpose Adsorbent amendment to contaminated sediments is one in situ remediation method to decrease the bioaccessibility of pollutants from the sediments. In this work, alkali-activated blast furnace slag (BFS) granules were used in a field experiment at Lake Kivijärvi (Finland). The lake was heavily affected by a mining accident in 2012, which released a significant peak load of metals and sulfate. The purpose of this work was to evaluate the performance of the novel amendment material for in situ remediation in real conditions with a preliminary cost estimation. Methods Alkali-activated BFS granules were prepared and characterized for composition, microstructure, and surface properties. Two mesocosms were placed in the lake: one with granule dosing and another without. Sediment and pore water samples were collected after a two-week period. Similar small-scale experiment was performed in laboratory with a three-month duration. Bioaccessibility of metals from sediments was assessed with a three-stage leaching procedure. Results The granules were effective in decreasing the mobility of Fe, Zn, Ni, and Cr in all leaching stages by approximately 50–90% in comparison with unamended sediment in the mesocosm experiment. Laboratory-scale incubation experiments also indicated decreased release of Ba, Co, Ni, Al, Fe, Mg, Mn and S. The estimated material costs were lower than the removal of the contaminated sediments with dredging and off-site treatment. Conclusion The results showed preliminarily the effectiveness of alkaline-activated BFS in the remediation of metal-contaminated sediments in a field experiment. However, topics requiring further study are the leaching of trace elements from the material and impact on the sediment pH.

Abstract This paper investigates the effects of reinforcing one-part alkali-activated slag binders (OAASs) with different types of fiber (steel, polyvinyl alcohol [PVA], basalt, and cellulose) and fiber combinations (single and hybrid) on the mechanical and durability properties of OAASs. All OAASs were reinforced by a 1% fiber volume fraction. Compressive and flexural strengths were the mechanical properties, which were addressed. The durability of the reinforced OAASs was examined based on water absorption by immersion and capillary, acid resistance, high temperature resistance, carbonation resistance, and freeze/thaw resistance. The experimental results showed that the fiber type and combination greatly affects the mechanical and durability properties of OAASs. Moreover, the influence of fiber type and combination on high temperature resistance and freeze/thaw resistance is greater than the influence on acid resistance and carbonation resistance. Graphic Abstract

Alkali-activation (or geopolymer) technology has gained a great deal of interest for its potential applications in water and wastewater treatment during the last decade. Alkali-activated materials can be prepared via a relatively simple and low-energy process, most commonly by treating aluminosilicate precursors with concentrated alkali hydroxide and/or silicate solutions at (near) ambient conditions. The resulting materials are, in general, amorphous, have good physical and chemical stability, ion-exchange properties, and a porous structure. Several of the precursors are industrial by-products or other readily available low-cost materials, which further enhances the environmental and economic feasibility. The application areas of alkali-activated materials in water and wastewater treatment are adsorbents/ion-exchangers, photocatalysts, high-pressure membranes, filter media, anti-microbial materials, pH buffers, carrier media in bioreactors, and solidification/stabilization of water treatment residues. The purpose of this review is to present a comprehensive evaluation of the rapidly growing prospects of alkali-activation technology in water and wastewater treatment.

Geopolymers are functional materials that can be used in various environmental applications such as adsorbents in pollutant removal from wastewaters. Metakaolin geopolymer (MK-GP) has been proven to be especially suitable for ammonium (NH4 +) removal. In this research, the optimal reagent and raw material ratios in the preparation of MK-GP in terms of NH4 + adsorption capacity were investigated. The response surface methodology based on the face-centered central composite design was used to optimize the levels of three factors: the amounts of hydroxide, silicate, and metakaolin. In addition, the effect of Na or K as the charge-balancing cation was studied. Empirical models were fitted to the experimental data using multiple linear regression. The significance of the models was confirmed by means of analysis of variance. Optimal NH4 + removal efficiency was achieved when the amounts of hydroxide and silicate were maximized, the amount of metakaolin was minimized, and Na-based reagents were used. These trends are most likely a result of optimized conversion of metakaolin into MK-GP.