Search

Purpose Programmed death-1 (PDCD-1) and lymphocyte activating 3 (LAG3), two important immunosuppressive molecules, play crucial roles in immune escape of tumor cells. This study evaluated the effects of PDCD-1 (rs10204525 and rs36084323), and LAG3 (rs870849 and rs1882545) gene polymorphisms on hepatocellular carcinoma (HCC) risk. Methods 341 patients with HCC and 350 cancer-free controls in the South Chinese population were included in a population-based case-control study. DNAs were extracted from peripheral blood samples. Genotypes were analyzed using multiplex PCR and sequencing. SNPs were analyzed using multiple inheritance models (co-dominant, dominant, recessive, and over-dominant). Results The allele and genotype frequencies of neither of the four polymorphisms, adjusted for age and gender, differed between HCC patients and controls. The differences were also not significant after stratifying by gender and age. According to our results, HCC patients with rs10204525 TC genotype had significantly lower AFP levels than HCC patients with rs10204525 TT genotype (P = 0.004). Moreover, the frequency of PDCD-1 rs36084323 CT genotype reduced the risk of TNM grade (CT vs. C/C-T/T: OR = 0.57, 95%CI = 0.37–0.87, P = 0.049). Conclusion Our results demonstrated that the PDCD-1 (rs10204525 and rs36084323), and LAG3 (rs870849 and rs1882545) polymorphism did not influence the risk of HCC, PDCD-1 rs10204525 TC genotype was associated with the lower AFP levels and rs36084323 CT genotypes were related to HCC tumor grades in the South Chinese samples.

Microseismic monitoring technology has become an important technique to assess stability of rock mass in metal mines. Due to the special characteristics of underground metal mines in China, including the high tectonic stress, irregular shape and existence of ore body, and complex mining methods, the application of microseismic technology is more diverse in China compared to other countries, and is more challenging than in other underground structures such as tunnels, hydropower stations and coal mines. Apart from assessing rock mass stability and ground pressure hazards induced by mining process, blasting, water inrush and large scale goaf, microseismic technology is also used to monitor illegal mining, and track personnel location during rescue work. Moreover, microseismic data have been used to optimize mining parameters in some metal mines. The technology is increasingly used to investigate cracking mechanism in the design of rock mass supports. In this paper, the application, research development and related achievements of microseismic technology in underground metal mines in China are summarized. By considering underground mines from the perspective of informatization, automation and intelligentization, future studies should focus on intelligent microseismic data processing method, e.g., signal identification of microseismic and precise location algorithm, and on the research and development of microseismic equipment. In addition, integrated monitoring and collaborative analysis for rock mass response caused by mining disturbance will have good prospects for future development.

Aim This study investigated the effects of sodium-glucose cotransporter 2 (SGLT2) inhibitors on renal outcomes in Asian patients with type 2 diabetes mellitus (T2DM). Materials and methods We searched Medline, EMBASE, and the Cochrane Library to identify randomized controlled trials published up to April 2020 that compared SGLT2 inhibitors with placebo or active comparator and reported any renal outcomes in Asian patients with T2DM. Random effects models and inverse variance weighting were used to calculate relative risks with 95% confidence intervals (CIs). Results We included 14 studies, totaling 3792 patients, in the analysis. In the short term, SGLT2 inhibitors significantly slowed estimated glomerular filtration rate (eGFR) decline (MD: 0.80; 95% CI: 0.66 to 0.94; p p p p = 0.11). However, dapagliflozin does appear to reduce albuminuria (p = 0.005). Lastly, SGLT2 inhibitors increased the incidence of adverse events (AEs) related to renal function (OR: 1.90; 95% CI: 1.24 to 2.91; p = 0.003), but did not increase the incidence of renal impairment (OR: 0.85; 95% CI: 0.40 to 1.81; p = 0.68). Conclusion The use of SGLT2 inhibitors in Asian patients with T2DM can help delay the decline of eGFR and reduce Scr and UA. Although SGLT2 inhibitors have no overall advantage in reducing albuminuria, dapagliflozin does appear to reduce albuminuria, and while they may increase the occurrence of AEs related to renal function, they do not increase the incidence of renal impairment.

Online customers execute transactions without inspecting products could expect to encounter risks of receiving products with unsatisfactory qualities, especially in food transactions. Thus quality supervision plays a key role in the establishment of trust as well as in the management of risk between online customers and sellers. Most papers in this field are in qualitative nature. In this paper, a quality supervision profit (QSP) model is formulated as a discrete-time optimal control problem. It is a quantitative approach, and it broadens the scope of current research in the area. The quality effort level of online sellers (QELs) and the quality supervision level of the electronic intermediary (QSLm) are considered together with their corresponding profit in the proposed model. The aim is to optimize an overall profit. A case study arising from Suichang’s food traceability system (FTS) of farm produce online transaction is carried out in details. The results reveal that QELs, QSLm and the profit distribution coefficient have a strong influence upon the profits of both sides. Finally, some concluding remarks, including potential further research topics, are given.

In the article, olivine-structured pure LiNiPO4 and yttrium-doped LiNiPO4 powder were prepared by sol-gel method using citric acid as chelating agent. The effect of 1.0 mol% Y doping on the structure and electrochemical properties of LiNiPO4 materials using powder X-ray diffraction pattern, scanning electron microscope, cyclic voltammetry, and electrochemical impedance spectroscopy was investigated. It was found that 1.0 mol% Y doping could induce an increase in lattice parameters and a decrease in particle sizes, which could enlarge lithium-ion diffusion channel, increase carriers concentration, and shorten diffusion lengths, thus decreasing polarization and improving lithium-ion diffusion and conductivity. All those could result in enhanced redox peak current density, decreased charge-transfer resistance, and potential separation between oxidation peak and reduction peak. Y doping could also decrease the highest occupied molecular orbital (HOMO) of NiO6 octahedron caused by Jahn-Teller effect, which caused the raises of redox potential.

The evolution of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has resulted in the emergence of new variant lineages that have exacerbated the COVID-19 pandemic. Some of those variants were designated as variants of concern/interest (VOC/VOI) by national or international authorities based on many factors including their potential impact on vaccine-mediated protection from disease. To ascertain and rank the risk of VOCs and VOIs, we analyze the ability of 14 variants (614G, Alpha, Beta, Gamma, Delta, Epsilon, Zeta, Eta, Theta, Iota, Kappa, Lambda, Mu, and Omicron) to escape from mRNA vaccine-induced antibodies. The variants show differential reductions in neutralization and replication by post-vaccination sera. Although the Omicron variant (BA.1, BA.1.1, and BA.2) shows the most escape from neutralization, sera collected after a third dose of vaccine (booster sera) retain moderate neutralizing activity against that variant. Therefore, vaccination remains an effective strategy during the COVID-19 pandemic.

Quantum phase transitions in quantum matter occur at zero temperature between distinct ground states by tuning a nonthermal control parameter. Often, they can be accurately described within the Landau theory of phase transitions, similarly to conventional thermal phase transitions. However, this picture can break down under certain circumstances. Here, we present a comprehensive study of the effect of hydrostatic pressure on the magnetic structure and spin dynamics of the spin-1/2 ladder compound C$_9$H$_{18}$N$_2$CuBr$_4$. Single-crystal heat capacity and neutron diffraction measurements reveal that the N$\rm \acute{e}$el-ordered phase breaks down beyond a critical pressure of $P_{\rm c}$$\sim$1.0 GPa through a continuous quantum phase transition. Estimates of the critical exponents suggest that this transition may fall outside the traditional Landau paradigm. The inelastic neutron scattering spectra at 1.3 GPa are characterized by two well-separated gapped modes, including one continuum-like and another resolution-limited excitation in distinct scattering channels, which further indicates an exotic quantum-disordered phase above $P_{\rm c}$., The revised version includes 10 pages and 5 figures in the main text. To appear in Nature Communications. Any comments are welcome

Nanomedicines (NMs) have emerged as an efficient approach for developing novel treatment strategies against a variety of diseases. Over the past few decades, NM formulations have received great attention, and a large number of studies have been performed in this field. Despite this, only about 60 nano-formulations have received industrial acceptance and are currently available for clinical use. Their in vivo pharmaceutical behavior is considered one of the main challenges and hurdles for the effective clinical translation of NMs, because it is difficult to monitor the pharmaceutic fate of NMs in the biological environment using conventional pharmaceutical evaluations. In this context, non-invasive imaging modalities offer attractive solutions, providing the direct monitoring and quantification of the pharmacokinetic and pharmacodynamic behavior of labeled NMs in a real-time manner. Imaging evaluations have great potential for revealing the relationship between the physicochemical properties of NMs and their pharmaceutical profiles in living subjects. In this review, we introduced imaging techniques that can be used for in vivo NM evaluations. We also provided an overview of various studies on the influence of key parameters on the in vivo pharmaceutical behavior of NMs that had been visualized in a non-invasive and real-time manner. Graphical Abstract

Polymeric monoliths are of great interest in a variety of applications. A new gelation approach to produce a mechanically stable polystyrene (PS) gel directly from its microemulsion is reported. To produce a PS gel, the as-prepared microemulsion is first demulsified by adding selected water-miscible organic solvents. The small PS latex particles liberated from the surfactant are assembled into a piece of bulk material at an appropriate temperature with a high degree of entanglement of the polymer chains. It is found that the d2T/η value is an important parameter to evaluate the gelation ability of the organic solvents and helps determine the gelation conditions. Finally, PS monoliths are obtained by capillary drying and their pore structures can be effectively tuned by changing the gelation time and the amount of solvent exchanged with water. This allows the controlled preparation of bulk PS artefacts with densities in the range of 0.06 to 1.14 g cm−3. This simple method of PS monolith production avoids the use of shaping tools or chemical templates, needs less energy, and is a promising alternative approach to design either integrated porous or compact polymer materials.

In this paper, titanium oxide (TiO2) films were prepared by cathodic electrodeposition using titanium oxysulfate (TiOSO4), potassium nitrate (KNO3), citric acid, and hydrogen peroxide (H2O2) as reactants. The article investigated the effect of citric acid and deposition temperature on the structure and electrochemical properties of TiO2 films. The results indicated that hydrous TiO2 thin films were prepared at 60°C when no citric acid was added, while thin films containing hydrous TiO2 and anatase phase were fabricated at 60–75°C when citric acid was added. It was found that adding citric acid and raising the reaction temperature (60–75°C) were beneficial to reduce crack width until cracks disappeared. Adding citric acid facilitated phase transition from hydrous TiO2 to anatase. Continuous and uniform TiO2 thin film was prepared at 75°C, which was found to have ideal capacitive behavior with a rectangular cyclic voltammogram and high photocurrent performance with photocurrent 2.89 μA, which is several times higher than that of cracked samples.

Rheumatoid arthritis (RA) is a long-term inflammatory disease derived from an autoimmune disorder of the synovial membrane. Current therapeutic strategies for RA mainly aim to hamper the macrophages' proliferation and reduce the production of pro-inflammatory cytokines. Therefore, the accumulation of therapeutic agents targeted at the inflammatory site should be a crucial therapeutic strategy. Nowadays, the nanocarrier system incorporated with stimuli-responsive property is being intensively studied, showing the potentially tremendous value of specific therapy. Stimuli-responsive (i.e., pH, temperature, light, redox, and enzyme) polymeric nanomaterials, as an important component of nanoparticulate carriers, have been intensively developed for various diseases treatment. A survey of the literature suggests that the use of targeted nanocarriers to deliver therapeutic agents (nanotherapeutics) in the treatment of inflammatory arthritis remains largely unexplored. The lack of suitable stimuli-sensitive polymeric nanomaterials is one of the limitations. Herein, we provide an overview of drug delivery systems prepared from commonly used stimuli-sensitive polymeric nanomaterials and some inorganic agents that have potential in the treatment of RA. The current situation and challenges are also discussed to stimulate a novel thinking about the development of nanomedicine.

In the mining process of deep metal mines, different types of rock mass instability failures are caused by strong mining disturbance. It is beneficial to master the fracture mechanism of rock mass in time to effectively prevent and control the ground pressure disasters. Microseismic signals are generated by the propagation and expansion of cracks inside the rock mass that contain plentiful information about the structural changes of rock mass. The ratio of the radiated energy of S and P waves (Es/Ep) of microseismic events can fast and effectively calculate the rock fracture mechanism, which is widely used for ground pressure hazard risk assessment. In this paper, this method was used to analyze the fracture mechanism of rock mass around deep stope in Hongtoushan copper mine and Ashele copper mine. Furthermore, the spatial distribution characteristics and proportion changes of microseismic events with different fracture mechanisms along with the mining process were studied. The results show that tensile cracks play a dominant role, accounting for 62% of the total events, during non-shear fracturing of the rock mass caused by the stoping unloading effect, while shear cracks occupy 68% of the total events during orebody slip failure. When the physical and mechanical properties of the orebody and rock mass are significantly different, slip failure along their contact zone is prone to occur under blasting disturbance. During deep mining, it is necessary to control the exposed area of the roof by each stoping, especially during the earlier mining stage, to avoid tensile stress concentration. The temporal and spatial variation of tension cracks and shear cracks induced by roof damage obtained in this paper can guide the prevention and control of ground pressure disasters in deep mining effectively.

Among the transition metal oxide catalysts, manganese oxides have great potential for formaldehyde (HCHO) oxidation at ambient temperature because of their high activity, nontoxicity, low cost, and polybasic morphologies. In this work, a MnO2-based catalyst (M-MnO2) with an interconnected network structure was successfully synthesized by a one-step hydrothermal method. The M-MnO2 catalyst was composed of the main catalytic agent, δ-MnO2 nanosheets, dispersed in a nonactive framework material of γ-MnOOH nanowires. The catalytic activity of M-MnO2 for HCHO oxidation at room temperature was much higher than that of the pure δ-MnO2 nanosheets. This is attributed to the special interconnected network structure. The special interconnected network structure has high dispersion and specific surface area, which can provide more surface active oxygen species and higher surface hydroxyl groups to realize rapid decomposition of HCHO.

Background A history of abdominal biliary tract surgery has been identified as a relative contraindication for laparoscopic common bile duct exploration (LCBDE), and there are very few reports about laparoscopic procedures in patients with a history of abdominal biliary tract surgery. Methods We retrospectively reviewed the clinical outcomes of 227 consecutive patients with previous abdominal biliary tract operations at our institution between December 2013 and June 2019. A total of 110 consecutive patients underwent LCBDE, and 117 consecutive patients underwent open common bile duct exploration (OCBDE). Patient demographics and perioperative variables were compared between the two groups. Results The LCBDE group performed significantly better than the OCBDE group with respect to estimated blood loss [30 (5–700) vs. 50 (10–1800) ml; p = 0.041], remnant common bile duct (CBD) stones (17 vs. 28%; p = 0.050), postoperative hospital stay [7 (3–78) vs. 8.5 (4.5–74) days; p = 0.041], and time to oral intake [2.5 (1–7) vs. 3 (2–24) days; p = 0.015]. There were no significant differences in the operation time [170 (60–480) vs. 180 (41–330) minutes; p = 0.067]. A total of 19 patients (17%) in the LCBDE group were converted to open surgery. According to Clavien’s classification of complications, the LCBDE group had significantly fewer postoperative complications than the OCBDE group (40 vs. 57; p = 0.045). There was no mortality in either group. Multiple previous operations (≥ 2 times), a history of open surgery, and previous biliary tract surgery (including bile duct or gallbladder + bile duct other than cholecystectomy alone) were risk factors for postoperative adhesion (p = 0.000, p = 0.000, and p = 0.000, respectively). Conclusion LCBDE is ultimately the least invasive, safest, and the most effective treatment option for patients with previous abdominal biliary tract operations and is especially suitable for those with a history of cholecystectomy, few previous operations (

Although the synaptic alterations associated with the stress-related mood disorder major depression has been well-documented, the underlying transcriptional mechanisms remain poorly understood. Here, we perform complementary bulk nuclei- and single-nucleus transcriptome profiling and map locus-specific chromatin interactions in mouse neocortex to identify the cell type-specific transcriptional changes associated with stress-induced behavioral maladaptation. We find that cortical excitatory neurons, layer 2/3 neurons in particular, are vulnerable to chronic stress and acquire signatures of gene transcription and chromatin structure associated with reduced neuronal activity and expression of Yin Yang 1 (YY1). Selective ablation of YY1 in cortical excitatory neurons enhances stress sensitivity in both male and female mice and alters the expression of stress-associated genes following an abbreviated stress exposure. These findings demonstrate how chronic stress impacts transcription in cortical excitatory neurons and identify YY1 as a regulator of stress-induced maladaptive behavior in mice., The mechanisms underlying the chronic stress-induced increased risk for major depressive disorder and anxiety are unclear. Here, the authors show the transcriptional changes occurring in neocortical neurons and identify YY1 as a regulator of chronic stress-induced maladaptive behavior in mice.

Conventional carbon materials cannot combine high density and high porosity, which are required in many applications, typically for energy storage under a limited space. A novel highly dense yet porous carbon has previously been produced from a three-dimensional (3D) reduced graphene oxide (r-GO) hydrogel by evaporation-induced drying. Here the mechanism of such a network shrinkage in r-GO hydrogel is specifically illustrated by the use of water and 1,4-dioxane, which have a sole difference in surface tension. As a result, the surface tension of the evaporating solvent determines the capillary forces in the nanochannels, which causes shrinkage of the r-GO network. More promisingly, the selection of a solvent with a known surface tension can precisely tune the microstructure associated with the density and porosity of the resulting porous carbon, rendering the porous carbon materials great potential in practical devices with high volumetric performance.

Mutations in the U2 small nuclear RNA auxiliary factor 1 (U2AF1) gene are the common feature of a major subset in myelodysplastic syndromes (MDS). However, the genetic landscape and molecular pathogenesis of oncogenic U2AF1S34F mutation in MDS are not totally understood. We performed comprehensive analysis for prognostic significance of U2AF1 mutations in acute myeloid leukemia (AML) cohort based on The Cancer Genome Atlas (TCGA) database. Functional analysis of U2AF1S34F mutation was performed in vitro. Differentially expressed genes (DEGs) and significantly enriched pathways were identified by RNA sequencing. The forkhead box protein O3a (FOXO3a) was investigated to mediate the function of U2AF1S34F mutation in cell models using lentivirus. Chromatin immunoprecipitation, immunoblotting analyses, and immunofluorescence assays were also conducted. U2AF1 mutations were associated with poor prognosis in MDS and AML samples, which significantly inhibited cell proliferation and induced cellular apoptosis in cell models. Our data identified that U2AF1-mutant cell lines undergo FOXO3a-dependent apoptosis and NLRP3 inflammasome activation, which induces pyroptotic cell death. Particularly, an increase in the level of FOXO3a promoted the progression of MDS in association with restored autophagy program leading to NLRP3 inflammasome activation in response to U2AF1S34F mutation. Based on the result that U2AF1S34F mutation promoted the transcriptional activity of Bim through upregulating FOXO3a with transactivation of cell cycle regulators p21Cip1 and p27Kip1, FOXO3a, a potentially cancer-associated transcription factor, was identified as the key molecule on which these pathways converge. Overall, our studies provide new insights that U2AF1S34F mutation functions the crucial roles in mediating MDS disease progression via FOXO3a activation, and demonstrate novel targets of U2AF1 mutations to the pathogenesis of MDS.

Myelodysplastic syndromes (MDSs) refractory or relapsed after hypomethylating agents (HMAs) remain a therapeutic challenge. The CHG regimen has been demonstrated to be effective in initially treating higher risk MDS. The current study evaluated the efficacy and toxicity of the CHG regimen in patients who were resistant to decitabine. Patients with higher risk MDS relapsed or refractory to decitabine were enrolled in this study. Each patient received the CHG regimen (cytarabine (25 mg/day, days 1–14) and homoharringtonine (1 mg/day, days 1–14) intravenously with G-CSF (300 μg/day) subcutaneously from day 0 until neutrophil count recovery to 2.0 × 109 cells/L). Next gene sequencing with a 31-gene panel was carried out in patients. Thirty-three patients were enrolled, including 12 relapsed and 21 refractory cases. The overall response rate (ORR) was 39.4% (13 of 33), with 9 (27.3%) achieving complete remission (CR), 2 having marrow CR (mCR), and 2 achieving partial remission (PR). The CR rate was higher in patients harboring fewer gene mutations (0–1) (55.6%) than in those with more gene mutations (> 1) (12.5%) (p = 0.021). The median overall survival (OS) of the 33 patients was 7.0 months. Patients who achieved a response had significantly longer survival times than were found in those without a response (21.0 M vs. 4.0 M, p

As one kind of promising anode materials for Li-ion batteries, titanium niobium oxides have attracted great attention due to their high theoretical capacities and high rate performances. Herein, TiNb6O17/C composite with TiNb6O17 nanocrystals distributed among amorphous carbon has been synthesized via an in situ sol–gel and then thermal decomposition process. The as-synthesized TiNb6O17/C composite presents reduced crystal size and improved electronic conductivity compared with the pristine TiNb6O17. The TiNb6O17/C displays both excellent rate performance (high specific capacity of 129 mA h g−1 at 30 C) and good cyclic performance (low capacity decay rate of 0.016% per cycle for 500 cycles at 10 C). These results indicate that the approach as reported is a simple yet effective way for high-performance anode with high-rate capability.

This study examined kindergarten teachers’ attitudes toward and confidence with implementing integrated STEM education in early childhood classroom settings. Data were collected through a self-report survey completed by 430 kindergarten teachers across China, as well as face-to-face interviews with 14 teachers from six provinces. The results revealed that the participating kindergarten teachers tended to have positive attitudes toward early childhood STEM education. However, the majority of the kindergarten teachers were not confident with implementing STEM education in their classroom settings. Regional differences were evident in the data: Kindergarten teachers from eastern region of China reported a higher level of confidence than teachers from central and western regions. Moreover, kindergarten teachers’ years of teaching experience and level of education were not found to be associated with their attitudes toward or confidence with STEM education. This paper concludes with a discussion of the potential challenges for STEM education in Chinese kindergartens based on the findings from this study. Implications and suggestions for future research are proposed.

In this article, SnO2/carbon composites were prepared by hydrothermal electrochemical method. Stannous chloride dihydrate (SnCl2·H2O) and glucose were used as Sn sources and carbon sources, respectively. Effects of the molar ratio of glucose/SnCl2 on structure, morphology, and properties of the composites were investigated by X-ray diffraction (XRD), Raman, FTIR, SEM, and cyclic voltammetry. Results indicated that SnO2 had the tetragonal rutile structure and carbon was diamond like carbon (DLC) structure. It was observed that the morphology and electrochemical properties of samples were affected by the molar ratio of glucose/SnCl2. Increasing the molar ratio of glucose/SnCl2 induced grain shape change from cube to spherical, decrease in grain size and increase of cyclic reversibility. When the molar ratio of glucose/SnCl2 was 100%, 100 nm spherical SnO2/carbon composites could be prepared by hydrothermal electrochemical method, which had a pair of redox peaks, and the peak positions were − 0.32/− 0.14 V and − 0.18/0.10 V at 5 mV/s in 1 M LiOH solution. At various scanning rates, there was little variation in the oxidation/reduction peak positions. It was considered to be a promising material for fast and reversible Li-ion alloying and de-alloying.

We employ the Lippmann-Schwinger formalism to derive the analytical solutions of the transmission and reflection coefficients through a one-dimensional open quantum system, in which particle loss or gain on one lattice site located at x = 0, or particle loss and gain on the lattice sites located at $$x = \pm {\textstyle{L \over 2}}$$ are considered respectively. The gain and loss on the lattice site are modeled by the delta potential with positive and negative imaginary values. The analytical solution reveals the underlying physics that the sum of the transmission and reflection coefficients through an open quantum system (even a $${\cal P}{\cal T}$$ -symmetric open system) may not be 1, i.e., qualitatively explains that the number of particles is not conserved in an open quantum system. Furthermore, we find that the resonance states can be formed in the $${\cal P}{\cal T}$$ -symmetric delta potential, which is similar to the case of real delta potential. The results of our analysis can be treated as the starting point of studying quantum transport problems through a non-Hermitian system using Green’s function method, and more general cases for high-dimensional systems may be deduced by the same procedure.

Background Electrospun (e-spun) nanofibers for wound dressing have attracted wide attention due to its large specific surface area, large porosity and breathability. Compared with solution electrospinning (e-spinning), melt e-spinning is more bio-friendly without toxic solvent participation, which provides the possibility of in situ e-spinning on wounds directly. However, previously reported melt e-spinning devices were usually bulky and cumbersome due to their necessary heating unit, and different components were separated to avoid electrostatic interference. Results In this article, we report on a self-powered hand-held melt e-spinning gun which can work without any external power supply (outdoors). The problem of electrostatic interference for this integrated device was solved by using a special high heat transfer insulation unit. The apparatus is easy and safe to operate by a single hand due to its small volume (24 × 6 × 13 cm3) and light weight (about 450 g). Some biodegradable polymers, for example, polycaprolactone (PCL) fibers were successful e-spun onto wounds directly by using this dressing gun. Conclusions PCL fibrous membrane has good biocompatibility and can be in situ electrospun to wound surface as a wound dressing by the portable melt e-spinning gun. Besides wound dressing, this hand-held melt e-spinning gun may be used in 3D printing and experimental teaching demonstration aids.

Background Acute lung injury (ALI) and/or acute respiratory distress syndrome (ARDS) are critical life-threatening syndromes characterized by the infiltration of a large number of granulocytes (mainly neutrophils) that lead to an excessive inflammatory response. Emodin (Emo) is a naturally occurring anthraquinone derivative and an active ingredient of Chinese medicine. It is believed to have anti-inflammatory effects. In this study, we examined the impact of Emo on the pulmonary inflammatory response and the granulocytes function in a rat model of lipopolysaccharide (LPS)-induced ALI. Results Treatment with Emo protected rat against LPS-induced ALI. Compared to untreated rat, Emo-treated rat exhibited significantly ameliorated lung pathological changes and decreased tumor necrosis factor-α (TNF-α) and interleukin-1β (IL-1β). However, Emo has no protective effect on the rat model of acute lung injury with granulocyte deficiency. In addition, treatment with Emo enhanced the bactericidal capacity of LPS-induced granulocytes via the up-regulation of the ability of granulocytes to phagocytize bacteria and generate neutrophil extracellular traps (NETs). Emo also downregulated the respiratory burst and the expression of reactive oxygen species (ROS) in LPS-stimulated granulocytes, alleviating the damage of granulocytes to surrounding tissues. Finally, Emo can accelerate the resolution of inflammation by promoting apoptosis of granulocytes. Conclusion Our results provide the evidence that Emo could ameliorates LPS-induced ALI via its anti-inflammatory action by modulating the function of granulocytes. Emo may be a promising preventive and therapeutic agent in the treatment of ALI.

In this paper, LiNiPO4 powders were prepared by sol gel method using citric acid as chelating agent. The article investigated the effect of annealing temperature and citric acid: Li molar ratio (cit/Li) on the structure and electrochemical properties of LiNiPO4 material. The results indicated that pure Pnma LiNiPO4 phase was synthesized at 700 and 800 °C. It was found that the increase of annealing temperature and cit/Li induced rod-to-sphere transition. The particles sizes increased with increasing annealing temperature, while the particles sizes were increasing firstly and then decreasing with increasing the ratio of cit/Li. Decreasing particles sizes had an advantage of both decreasing the charge transfer resistance (Rct) and improving the reversible capacity of pure olivine LiNiPO4 samples. Spherical particles (100–200 nm) prepared at 700 °C with cit/Li molar ratio of 2:1 were found to have low resistance, high electrochemical reversibility, cycle stability.

The practical application of lithium-sulfur batteries with a high energy density has been plagued by the poor cycling stability of the sulfur cathode, which is a result of the insulating nature of sulfur and the dissolution of polysulfides. Much work has been done to construct nanostructured or doped carbon as a porous or polar host for promising sulfur cathodes, although restricting the polysulfide shuttle effect by improving the redox reaction kinetics is more attractive. Herein, we present a well-designed strategy by introducing graphitic carbon nitride (g-C3N4) into a three-dimensional hierarchical porous graphene assembly to achieve a synergistic combination of confinement and catalyzation of polysulfides. The porous g-C3N4 nanosheets in situ formed inside the graphene network afford a highly accessible surface to catalyze the transformation of polysulfides, and the hierarchical porous graphene-assembled carbon can function as a conductive network and provide appropriate space for g-C3N4 catalysis in the sulfur cathode. Thus, this hybrid can effectively improve sulfur utilization and block the dissolution of polysulfides, achieving excellent cycling performance for sulfur cathodes in lithium-sulfur batteries.

This paper presents a load balancing routing algorithm based on congestion prediction (LBRA-CP) so as to realize an efficient load balancing over the entire Low Earth Orbit satellite networks. A multi-objective optimization model is built, which not only adopts modifying factor to adjust path cost, but also uses congestion prediction to foresee inter-satellite link congestion. Then an ant colony algorithm is utilized to solve this model, resulting in finding an optimal path for every connection request. Meanwhile, in order to improve the reliability of LBRA-CP, the valve of the pheromone evaporation coefficient is discussed in this paper. The performance is measured by the receiver’s throughput, the link utilization and the end-to-end delay. Simulation results show that LBRA-CP performs well in balancing traffic load and increases the receiver’s throughput. Meanwhile, the end-to-end delay can meet the requirement of video transmission.

In the original publication, the affiliation of authors Ying-Tao Mu, Jin-Qiang Yu, Zhen-Kai Liu, Yan Wang, Jie Shao and De-Kun Li was published incorrectly. The correct affiliation is given in this correction.

Mutations in MECP2 cause Rett syndrome (RTT), an X-linked neurological disorder characterized by regressive loss of neurodevelopmental milestones and acquired psychomotor deficits. However, the cellular heterogeneity of the brain impedes an understanding of how MECP2 mutations contribute to RTT. Here we developed a Cre-inducible method for cell-type-specific biotin tagging of MeCP2 in mice. Combining this approach with an allelic series of knock-in mice carrying frequent RTT-associated mutations (encoding T158M and R106W) enabled the selective profiling of RTT-associated nuclear transcriptomes in excitatory and inhibitory cortical neurons. We found that most gene-expression changes were largely specific to each RTT-associated mutation and cell type. Lowly expressed cell-type-enriched genes were preferentially disrupted by MeCP2 mutations, with upregulated and downregulated genes reflecting distinct functional categories. Subcellular RNA analysis in MeCP2-mutant neurons further revealed reductions in the nascent transcription of long genes and uncovered widespread post-transcriptional compensation at the cellular level. Finally, we overcame X-linked cellular mosaicism in female RTT models and identified distinct gene-expression changes between neighboring wild-type and mutant neurons, providing contextual insights into RTT etiology that support personalized therapeutic interventions.

A dual functional CNTs@graphene/CNTs cathode for Li–Se battery was constructed by a CNTs@graphene network and a CNTs interlayer. CNTs were first integrated with graphene to form a three-dimensional (3D) framework and work together as a conductive matrix for Se confinement. The optimized composite cathode delivers a high initial capacity of 575 mAh·g−1 at 0.5 A·g−1 and good rate capacity with a retained capacity of 479 mAh·g−1 at 2.0 A·g−1 (73% of the capacity at 0.2 A·g−1). CNTs were further served as an interlayer to confine the diffusion of polyselenides by constructing a thin CNTs layer outside the CNTs@graphene network. An improved initial capacity of 616 mAh·g−1 at 0.5 A·g−1 is achieved with a retained capacity of 538 mAh·g−1 after 80 cycles, indicating the effective dual function of CNTs in this novel cathode construction and great application potential for Li–Se battery.

Nanomaterials can be incorporated in the synthesis of membrane to obtain mixed-matrix membrane with marked improvement in properties and performance. However, stability and dispersion of the nanomaterials in the membrane matrix, as well as the need to use high ratio of nanomaterials for obvious improvement of membrane properties, remain a major hurdle for commercialization. Hence, this study aims to investigate the improvement of polyamide 6,6 membrane properties with the incorporation of silver nanoparticles decorated on graphene oxide (Ag-GO) nanoplates and at the same time focus is given to the issues above. Graphene oxide nanoplates were synthesized using the modified Hummers’ method and decorated with silver before embedded into the polyamide 6,6 matrix. Physicochemical characterizations were conducted on both nanoplates and the mixed-matrix Ag-GO polyamide 6,6 membrane. The issues of Ag agglomeration and leaching were not observed, which could be attributed to the decoration of Ag on GO that helped to disperse the nanomaterials and provided a better anchor point for the attachment of Ag nanoparticles. The synthesized membrane showed marked improvement regarding flux (135% increment) and antifouling (40% lower irreversible fouling), which could be ascribed to the more negative charge of membrane surface (−14 ± 6 to −31 ± 3.8 mV) and hydrophilicity (46% enhancement) of the membranes. With minimal embedment of Ag nanoparticles, the membrane showed superior antibacterial property where the E. coli bacteria could not form a single colony on the membrane surface. Overall, the decoration of Ag on GO nanoplates could be a promising approach to resolve the agglomeration and leaching issues as well as reduce the amount of precious Ag in the synthesis of Ag-GO polyamide 6,6 membrane.

Epigenomic reconfiguration, including changes in DNA methylation and histone modifications, is crucial for the differentiation of embryonic stem cells (ESCs) into somatic cells. However, the extent to which the epigenome is reconfigured and the interplay between components of the epigenome during cellular differentiation remain poorly defined. We systematically analyzed and compared DNA methylation, various histone modification, and transcriptome profiles in ESCs with those of two distinct types of somatic cells from human and mouse. We found that global DNA methylation levels are lower in somatic cells compared to ESCs in both species. We also found that 80% of regions with histone modification occupancy differ between human ESCs and the two human somatic cell types. Approximately 70% of the reconfigurations in DNA methylation and histone modifications are locus- and cell typespecific. Intriguingly, the loss of DNA methylation is accompanied by the gain of different histone modifications in a locus- and cell type-specific manner. Further examination of transcriptional changes associated with epigenetic reconfiguration at promoter regions revealed an epigenetic switching for gene regulation—a transition from stable gene silencing mediated by DNA methylation in ESCs to flexible gene repression facilitated by repressive histone modifications in somatic cells. Our findings demonstrate that the epigenome is reconfigured in a locus- and cell type-specific manner and epigenetic switching is common during cellular differentiation in both human and mouse.

A three-dimensional porous graphene oxide (PGO) material prepared by hydrothermal method was selected to adsorb methylene blue (MB), which demonstrates a high MB adsorption capacity, up to 1100 mg g−1 in alkaline solution at room temperature. The influences of different pore structures and different contents of oxygen-containing functional groups on MB adsorption behaviors were studied in detail, which indicated that the high MB adsorption capacity is mainly ascribed to the synergistic effect of the large number of oxygen-containing functional groups and the interconnected 3D porous network. Moreover, based on the investigation on the adsorption kinetics and the effect of pH value on MB adsorption, we propose a two-step adsorption kinetics for PGO, which involved in two interactions between MB molecular and porous graphene oxide-based carbon: electrostatic force and π-π stacking. Besides, the calculation of the activation energies indicates that chemisorption dominates the adsorption for PGO in comparison with physisorption for three-dimensional porous graphene materials which has low adsorption capacity because of the removal of functional groups. The results are of great significance for the design and environmental applications of PGO as a promising adsorbent material for water purification.

The objective of this work is to develop CuCl@AC adsorbent with high CO capacity and selectivity from CO/N2 binary gas mixture. A series of CuCl@AC adsorbents were prepared by a solid-state auto dispersion method, and then characterized by N2 adsorption test, XRD and XPS. CO and N2 adsorption isotherms on the adsorbents were measured by a volumetric method. The adsorption isotherms and selectivities of CuCl@AC adsorbents for CO/N2 binary mixture were estimated on the basis of ideal adsorbed solution theory (IAST). Results showed that (a) CO uptakes of CuCl@AC increased with CuCl loading in the loading range of 0–1.2 g/g. The maximal CO adsorption capacity of the CuCl@AC with CuCl loading of 1.2 g/g reached 38 cc/g at the P/P0 of 0.40, around 8 times of that over the original AC; (b) calcination time for the preparation of Cu(I)@AC had significantly impact on CO adsorption of the adsorbents due to valence change of Cu species on carbon surfaces. XPS analysis indicated that when the calcination time was optimized to be 1 h at 350 °C under argon, the prepared Cu(I)@AC had the highest percentage of Cu+ species on its surfaces, and consequently it had the highest CO capacity among the adsorbents since adsorptive species responsible for CO adsorption is Cu+; (c) The IAST-predicted CO/N2 adsorption selectivities of 1.2CuCl/AC decreased with pressure. Its CO/N2 selectivity was up to 100–450 at low pressure range of 0–10 kPa, and it remained in the range of 50–100 at higher pressure range of 20–100 kPa. The high adsorption capacity and selectivity of Cu(I)@AC adsorbents made it a promising adsorbent for CO/N2 mixture separation.

In this study on the northern section of the Sichuan–Yunnan tectonic belt (SYNSTB), which is on the eastern margin of the Tibetan Plateau, we assess the characteristics of superposed structures in the Daliang–Shan and Hanyuan–Ganluo fault belts, as well as in the Ganluo Basin that lies between them. By integrating field observations of structures with an analysis of magnetic fabrics, we show that the northern section of the SYNSTB underwent two episodes of deformation during the Mesozoic–Cenozoic. The first episode was characterized by NE-SW shortening that was initiated in the Late Jurassic–Late Cretaceous, and it may be related to the clockwise rotation of Yangtze Block and the far field effect of the Neo-Tethys ocean basin closed; and the second by NW-SE compressional shearing that was initiated in the Miocene–Pliocene and continues to the present day, and it is the result of the eastern extrusion of the Tibetan Plateau material. The magnetic fabrics associated with the weak deformation of the Ganluo Basin are mainly the result of layer-parallel shortening before folding, which is inferred to indicate Mesozoic NE-SW compression. In addition, the following atypical magnetic fabrics are present: (1) a magnetic foliation that is oblique to the bedding and associated with layerparallel simple shearing during folding, and (2) a magnetic lineation that is oblique to the strike of bedding to varying degrees, and that is the result of two superposed structures. The integrated study of field structures and magnetic fabrics indicates, therefore, that the N-S structures of the SYNSTB were mainly developed in the Mesozoic, but were subsequently overprinted by left-lateral strike-slip shearing during the Cenozoic. The resulting composite tectonic system provides further information on the tectonic evolution of the eastern margin of the Tibetan Plateau during the Mesozoic and Cenozoic.

Efforts to manipulate locus-specific histone acetylation to assess their causal role in gene expression and cellular and behavioural phenotypes have been impeded by a lack of experimental tools. The Cas9 nuclease has been adapted to target epigenomic modifications, but a detailed description of the parameters of such synthetic epigenome remodellers is still lacking. Here we describe a Cas9-based histone deacetylase (HDAC) and the design principles required to achieve locus-specific histone deacetylation. We assess its range of activity and specificity, and analyse target gene expression in two different cell types to investigate cellular context-dependent effects. Our findings demonstrate that the chromatin environment is an important element to consider when utilizing this synthetic HDAC., CRISPR-Cas9 has been utilized, through the fusion of catalytic dead nuclease with chromatin-remodellers, to modify the epigenetic state of specific loci. Here the authors manipulate locus-specific histone acetylation and describe the parameters that need to be considered for its use.

Black carbon-stabilized anatase particles were prepared by a simple one-step hydrothermal–electrochemical method using glucose and titanium citrate as the carbon and titanium source, respectively. Morphological, chemical, structural, and electrochemical characterizations of these powders were carried out by Raman spectroscopy, Fourier-transform infrared spectroscopy, x-ray diffraction, scanning electron microscopy, and cyclic voltammetry. It was revealed that 200-nm carbon/anatase TiO2 was homogeneously dispersed, and the powders exhibited excellent cyclic performance at high current rates of 0.05 V/s. The powders are interesting potential materials that could be used as anodes for lithium-ion batteries.

The effects of tacrolimus postconditioning on protein-serine-threonine kinases (Akt) phosphorylation and apoptotic cell death in rats after spinal cord ischemia-reperfusion injury were investigated. Ninety male SD rats were randomly divided into sham operation group, ischemia-reperfusion group and tacrolimus postconditioning group. The model of spinal cord ischemia was established by means of catheterization through femoral artery and balloon dilatation. The spinal cord was reperfused 20 min after ischemia via removing saline out of balloon. The corresponding spinal cord segments were excised and determined for Akt activity in spinal cord tissue by using Western blotting at 5, 15, and 60 min after reperfusion respectively. Spinal cord tissue sections were stained immunohistochemically for detection of the phosphorylated Akt expression at 15 min after reperfusion. Flow cytometry was applied to assess apoptosis of neural cells, and dry-wet weights method was employed to measure water content in spinal cord tissue at 24 h after reperfusion. The results showed that the activities of Akt in tarcolimus postconditioning group were significantly higher than those in ischemia-reperfusion group at 5, 15, and 60 min after reperfusion (P

MicroRNAs (miRNAs) originate from primary transcripts (pri-miRNAs) with characteristic stem-loop structures, and their accurate processing is required for the production of functional miRNAs. Here, using the pri-miR-166 family in Arabidopsis thaliana as a paradigm, we report the crucial role of pri-miRNA terminal loops in miRNA biogenesis. We found that multibranched terminal loops in pri-miR-166s substantially suppress miR-166 expression in vivo. Unlike canonical processing of pri-miRNAs, terminal loop-branched pri-miRNAs can be processed by Dicer-like 1 (DCL1) complexes bidirectionally from base to loop and from loop to base, resulting in productive and abortive processing of miRNAs, respectively. In both cases, DCL1 complexes canonically cut pri-miRNAs at a distance of 16-17 bp from a reference single-stranded loop region. DCL1 also adjusts processing sites toward an internal loop through its helicase domain. These results provide new insight into the poorly understood processing mechanism of pri-miRNAs with complex secondary structures.

ORF43 (ac43) of Autographa californica multiple nucleopolyhedrovirus (AcMNPV) is a highly conserved baculovirus gene of unknown function. To investigate the role of ac43 in the baculovirus lifecycle, we constructed an ac43-deleted mutant AcMNPV, Ac43KO. After transfection into Spodoptera frugiperda cells, Ac43KO produced polyhedra much larger in size than those of wild-type AcMNPV. Interestingly, some of the nucleocapsids were singly enveloped in the polyhedrin matrix while the nucleocapsids of AcMNPV are known to be multiply enveloped. Furthermore, Ac43KO led to a defect in the transcription and expression of polyhedrin, which resulted in reduced occlusion body production. However, Ac43KO did not affect production of budded virus as there was no remarkable difference in budded virus titer. These results suggest that ac43 plays an important role in the expression of polyhedrin, the morphogenesis of occlusion body, and the assembly of virions occluded in occlusion bodies.

The structures, energetics, and isomerization of a possible interstellar [Si, O, S] system were explored at the CCSD(T)/aug-cc-pVQZ//CCSD(T)/aug-cc-pVTZ level. On the schemaitc potential energy surface(PES), we found that silicon oxysulfide(OSiS) produced in laboratory is the global minimum. An analysis of the Wiberg bond index(WBI), bond order and the bond length, shows that silicon oxysulfide contains SiO and SiS double bonds in accordance with the results of Schnockel. Besides silicon oxysulfide, another interesting cyclic minimum(c-SiOS) was found to have a very high kinetic stability stabilized by the least barrier of 120.9 kJ/mol. In light of the fact that no cyclic sulfide-containing species has been detected in space, c-SiOS could be a very promising candidate. The presented results might provide useful information on detected interstellar molecules O=Si=S and c-SiOS.

Black carbon-stabilized anatase particles were prepared by a simple one-step hydrothermal–electrochemical method using glucose and titanium citrate as the carbon and titanium source, respectively. Morphological, chemical, structural, and electrochemical characterizations of these powders were carried out by Raman spectroscopy, Fourier-transform infrared spectroscopy, x-ray diffraction, scanning electron microscopy, and cyclic voltammetry. It was revealed that 200-nm carbon/anatase TiO2 was homogeneously dispersed, and the powders exhibited excellent cyclic performance at high current rates of 0.05 V/s. The powders are interesting potential materials that could be used as anodes for lithium-ion batteries.

A novel recombinant bacmid, bEasyBac, that enables the easy and fast generation of pure recombinant baculovirus without any purification step was constructed. In bEasyBac, attR recombination sites were introduced to facilitate the generation of a recombinant viral genome by in vitro transposition. Moreover, the extracellular RNase gene from Bacillus amyloliquefaciens, barnase, was expressed under the control of the Cotesia plutellae bracovirus early promoter to negatively select against the non-recombinant background. The bEasyBac bacmid could only replicate in host insect cells when the barnase gene was replaced with the gene of interest by in vitro transposition. When bEasyBac was transposed with pDualBac-EGFP, the resulting recombinant virus, AcEasy-EGFP, showed comparable levels of EGFP expression efficiency to the plaque-purified recombinant virus AcEGFP, which was constructed using the bAcGOZA system. In addition, no non-recombinant backgrounds were detected in unpurified AcEasy-EGFP stocks. Based on these results, a high-throughput system for the generation of multiple recombinant viruses at a time was established.

A novel antifungal Bacillus thuringiensis strain 19-22, ssp. kurstaki (H3a3b3c), was characterised. This strain included cry1Aa, cry1Ab, cry1Ac, and cry1D, which have high insecticidal activities against lepidopteran larvae other than Spodoptera exigua. To expand the host spectrum, a cry1E gene whose product is active against S. exigua was introduced into the isolate. The transformant successfully expressed the Cry1E protein without any loss of its original antifungal activities. These results indicate that this recombinant strain exhibits dual activities and may be used as an integrated control agent to control plant diseases and insect pests.

The problem of an ellipsoidal inhomogeneity embedded in an infinitely extended elastic medium with sliding interfaces is investigated. An exact solution is presented for such an inhomogeneous system that is subject to remote uniform shearing stress. Both the elastic inclusion and matrix are considered isotropic with a separate elastic modulus. Based on Lur’e’s approach to solving ellipsoidal cavity problems through Lame functions, several harmonic functions are introduced for Papkovich-Neuber displacement potentials. The displacement fields inside and outside the ellipsoidal inclusion are obtained explicitly, and the stress field in the whole domain is consequently determined.

The purpose of this study was to explore Chinese and Australian primary children’s conceptual understandings of the Earth. The research was conducted in the interpretive paradigm and was designed to be descriptive with comparative and cross sectional elements. Participants were Year 3 and Year 6 children from three schools in Hunan Province, central south China (n = 38) and Year 3 and Year 6 children from three schools in Western Australia (n = 36). In-depth interviews including drawings were carried out to explore the participants’ conceptual understandings of the Earth’s shape, gravity, day/night cycle and seasons. The results showed that, regardless of different cultures, children from the same year group constructed similar concepts about the Earth. The Year 3 children were more likely than the Year 6 children to demonstrate intuitive conceptions of a round and flat Earth. The Year 6 children were more likely to demonstrate consistent understandings of a spherical Earth. The findings supported the universality of entrenched presuppositions hypothesis. Cultural mediation was found to have a subtle impact on children’s understanding of the Earth. A model of conceptual development is proposed.

We report on a cataluminescence sensor for the determination of gaseous acetic acid. It is based on a 60-nm thick sol–gel film of In2O3 on a ceramic support. SEM, XPS and surface profiling were applied for its characterization. It is found that aluminum ions of the ceramic substrate penetrate into the film and produce a synergetic catalytic effect. The sensor displays high sensitivity and specificity for acetic acid, a low detection limit, a wide linear range and a fast response. No (or only very low) interference was observed by formic acid, ammonia, acrolein, benzene, formaldehyde, ethanol, and acetaldehyde. The sensor was successfully applied to the determination of acetic acid in spiked air samples. We also discuss a conceivable mechanism (based on the reaction products) for the cataluminescence resulting from the oxidation reaction on the surface of the sensor film.

In this paper, systematic approaches to determine the polynomial stress functions for anisotropic plane problems are presented based on the Lekhnitskii’s theory of anisotropic elasticity. It is demonstrated that, for plane problems, there are at most four independent polynomials for arbitrary n-th order homogeneous polynomial stress functions: three independent polynomials for n equal to two and four for n greater than or equal to three. General expressions for such polynomial stress functions are derived in explicit forms. Unlike the isotropic case, the polynomials for anisotropic problems are functions of material constants, because the elastic constants cannot be eliminated in the governing equation for general anisotropic cases. The polynomials can be used as analytical trial functions to develop the new 8-node hybrid element (ATF-Q8) for anisotropic problems. This ATF-Q8 element demonstrated excellent performance in comparison with traditional numerical methods through several testing examples.