Search

An electromagnetic energy source in the radio-frequency range delivers power to a stent circuit via resonant inductive coupling, allowing a thermally triggered release of gel via Joule heating. A gold-electroplated, medical-grade stainless steel stent, serving as the base of the prototype device, melts a coating made from an emulsion composed mainly of dodecanoic acid. These coated devices produce wirelessly controllable releases of a gel into thermally regulated, stirred water that is near body temperature. The gel is made from salt, water, and gelatine from porcine skin and used to simulate drug release in this study. Thus, this system serves as a proof of concept to show the viability of controlling local drug delivery using this prototype device. Dodecanoic acid, a fatty acid, has a phase transition from solid to liquid near 43[Formula: see text]C and has relatively good biocompatibility. The average melting temperature of two different emulsions was 40.8±0.7[Formula: see text]C, a suitable value for the targeted application. Demonstration of controllable releases used electromagnetic pulses of approximately 180 seconds in duration, illustrating reproducibility of a controllable release phase while remaining relatively inert in the absence of stimuli. Releases were observable through measuring the conductivity of the water, the water temperature, and the stent temperature. This electrothermally active stent device enables wirelessly controlled local delivery with controlled dosage and timing, a concept with a wide range of potential applications. Some relevant examples include inhibiting restenosis or cancer treatment via targeted chemotherapy.

This paper reports a sensor-integrated telemetric stent targeted at wireless detection and monitoring of restenosis, a common vascular complication induced by stent implantation. The developed "smart" stent incorporates the design and fabrication approaches that raise the practicality of the device, being tested in an in vivo study that validates its operating principle. The stent is produced to have a gold-coated helical-like structure that serves as a high-performance inductor/antenna and integrated with a novel capacitive pressure sensor chip, all based on medical-grade stainless steel. The stent device forms an inductor-capacitor resonant tank that enables radio-frequency (RF) wireless pressure sensing in an operating frequency range of 30-80 MHz. With an overall length of 20 mm, the device is designed to be compatible with standard balloon catheters and necessary crimping process. The balloon-expanded devices are characterized in saline and blood to determine selective coating of passivation layer, Parylene C, with tailored thicknesses in order to maximize both RF and sensing abilities. In vitro testing of the devices reveals a frequency sensitivity up to 146 ppm/mmHg over a pressure range of 250 mmHg. Tests in pig models show wireless detection of device's resonance and frequency response to variations in local blood pressure, the targeted function of the device.

This paper reports a micromachined drug delivery device that is wirelessly operated using radiofrequency magnetic fields for implant applications. The controlled release from the drug reservoir of the device is achieved with the microvalves of poly(N-isopropylacrylamide) thermoresponsive hydrogel that are actuated with a wireless resonant heater, which is activated only when the field frequency is tuned to the resonant frequency of the heater circuit. The device is constructed by bonding a 1-mm-thick polyimide component with the reservoir cavity to the heater circuit that uses a planar coil with the size of 5-10 mm fabricated on polyimide film, making all the outer surfaces to be polyimide. The release holes created in a reservoir wall are opened/closed by the hydrogel microvalves that are formed inside the reservoir by in-situ photolithography that uses the reservoir wall as a photomask, providing the hydrogel structures self-aligned to the release holes. The wireless heaters exhibit fast and strong response to the field frequency, with a temperature increase of up to 20°C for the heater that has the 34-MHz resonant frequency, achieving 38-% shrinkage of swelled hydrogel when the heater is excited at its resonance. An active frequency range of ~2 MHz is observed for the hydrogel actuation. Detailed characteristics in the fabrication and actuation of the hydrogel microvalves as well as experimental demonstrations of frequency-controlled temporal release are reported.